Suburban partds pictures - The 1947 - Present Chevrolet & GMC Truck Message Board Network

65chevysub · 03-31-2014, 12:46 AM

Just a quick couple of questions
First. Does anyone have a picture of the top part of the neck of the filler tube where the cap sits? I have my original, with small "slots" for the cap, and I have another filler tube, that I got from another Suburban, that has large "slots", and can't get a cap for, locking or non locking.
2nd-I'm wanting to add 2 original mirrors to my Sub. I have the mounting area on the drivers door, that has been filled in over the years, and can't get the screws out as they just spin, but need a template to mount one on the passenger door.

3rd- back in 1996 I added a Master Power Brakes disc swap to the front, but have been concerned about the angle of the booster and M/C. They are at an upward angle, and not level. Could this be part of my problem every once in a while of a hard pedal and hard to stop? The kit from them was the 63-72SK(Super Kit) Anyone had any experiences with this kit? This also changed my wheels to 5 lugs.

Thanks for any and all help. I haven't been on here for awhile, as my Yahoo account got hacked in January, so I now have a new username on here, and waiting for it to be finalized. It is suburbanrenewalII.

RockTonka · 03-31-2014, 08:14 PM

Here's the filler neck on our 66...

**Captainfab** · 04-01-2014, 12:27 AM

A slight angle of the master cylinder will not affect the braking. It sounds like maybe the piston is hanging up or the booster is randomly loosing vacuum.

65chevysub · 04-01-2014, 02:57 PM

Captain
I'll check the piston. Originally I had too soft of tubing going to the back of the carb(this is the only place I can put my vacuum line), then had a friend put some fuel type line on it. I am running an original 4BBL intake from possibly a 327 The engine came with a 2BBL carb from the factory in 1963.. I'm thinking of installing an Edelbrock intake to update it a little. Thanks for the reply

03-31-2014, 12:46 AM	#1
65chevysub Registered User Join Date: Feb 2013 Location: Cottonwood, Arizona Posts: 1,382	Suburban partds pictures Just a quick couple of questions First. Does anyone have a picture of the top part of the neck of the filler tube where the cap sits? I have my original, with small "slots" for the cap, and I have another filler tube, that I got from another Suburban, that has large "slots", and can't get a cap for, locking or non locking. 2nd-I'm wanting to add 2 original mirrors to my Sub. I have the mounting area on the drivers door, that has been filled in over the years, and can't get the screws out as they just spin, but need a template to mount one on the passenger door. 3rd- back in 1996 I added a Master Power Brakes disc swap to the front, but have been concerned about the angle of the booster and M/C. They are at an upward angle, and not level. Could this be part of my problem every once in a while of a hard pedal and hard to stop? The kit from them was the 63-72SK(Super Kit) Anyone had any experiences with this kit? This also changed my wheels to 5 lugs. Thanks for any and all help. I haven't been on here for awhile, as my Yahoo account got hacked in January, so I now have a new username on here, and waiting for it to be finalized. It is suburbanrenewalII.

03-31-2014, 08:14 PM	#2
RockTonka Registered User Join Date: Jun 2010 Location: Oklahoma City, OK Posts: 1,524	Re: Suburban partds pictures Here's the filler neck on our 66... Attached Images __________________ 1958 Chevy 1 ton dually 4X4 dump/flat bed My build thread 1966 "Not-So-Original" Chevy Custom Trim Suburban My Time-Killing Project Truck 1966 GMC Extended cab 1 1/4 ton 4X4 My Son's build thread

04-01-2014, 12:27 AM	#3
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,252	Re: Suburban partds pictures A slight angle of the master cylinder will not affect the braking. It sounds like maybe the piston is hanging up or the booster is randomly loosing vacuum. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

04-01-2014, 02:57 PM	#4
65chevysub Registered User Join Date: Feb 2013 Location: Cottonwood, Arizona Posts: 1,382	Re: Suburban partds pictures Captain I'll check the piston. Originally I had too soft of tubing going to the back of the carb(this is the only place I can put my vacuum line), then had a friend put some fuel type line on it. I am running an original 4BBL intake from possibly a 327 The engine came with a 2BBL carb from the factory in 1963.. I'm thinking of installing an Edelbrock intake to update it a little. Thanks for the reply



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.