how to install this?

[1963chevyc20]

i purchased my 2 ton wench for my 63 c20 and i would like to put it on my front bumper. do i need a grill guard? i don't know where to look for one of those if i need one.

[61K10]

post up a pic of the winch. maybe post this in the 4x4 section

[1963chevyc20]

ok.

[PGSigns]

I would build a receiver hitch setup that bolts to the front frame rails and set it up on a hitch plate. That way when you don't need it, it is out the weather and you can keep the look of the truck intact. No matter what you choose to do it will be a custom build.
Jimmy

[Clyde65]

Man, that wench is huge if she is 2 tons!!!

[Blue666]

Originally Posted by Clyde65

Man, that wench is huge if she is 2 tons!!!

X2

[Woogeroo]

Originally Posted by Blue666

X2

hah!

That's a Whole Lotta Rosie for sure!

-W

[63burban]

Yup, you'll have to custom build a mount.
2 ton or 4,000 pound winch isn't much, minimum capacity to get you out of anything would be an 8,000 winch.

[1963chevyc20]

Yea. I have given up on it for now. Yes the wench is very big! I need it tho. I pull trailers with a lot f weight on em. Was pulling in the drive while it was raining and I had my dump trailer full of trees and my truck is 2wd. She sunk and got stuck. Had to flag down a 4x4 to pull me out. Wish my k20 was running. 1974 k20 with a 75 grill.

[pdxhall]

I don't know if you could strap a wench that size on the front of your truck.

[spacedebris]

Originally Posted by PGSigns

I would build a receiver hitch setup that bolts to the front frame rails and set it up on a hitch plate. That way when you don't need it, it is out the weather and you can keep the look of the truck intact. No matter what you choose to do it will be a custom build.
Jimmy

x2

I had a neighbor who was into 4 wheeling and had a 79 toyota pu he wheeled with. He mounted two receiver hitches to his truck, one front and on rear. then mounted his winch to a "receiver hitch winch mount" like this

http://www.autoaccessoriesgarage.com...er-Winch-Mount

Then when not in use it sat in the tool box in the bed or in the garage. When needed he would just connect it on which ever end of the truck it was needed.

I always thought that this was a super idea myself.

[Clyde65]

Originally Posted by spacedebris

x2

I had a neighbor who was into 4 wheeling and had a 79 toyota pu he wheeled with. He mounted two receiver hitches to his truck, one front and on rear. then mounted his winch to a "receiver hitch winch mount" like this

http://www.autoaccessoriesgarage.com...er-Winch-Mount

Then when not in use it sat in the tool box in the bed or in the garage. When needed he would just connect it on which ever end of the truck it was needed.

I always thought that this was a super idea myself.

I agree with these two fellows.