Stock height from axle to wheelwell opening - The 1947 - Present Chevrolet & GMC Truck Message Board Network

WB72 · 01-04-2004, 02:44 PM

Does anyone have a measurement from the center of the axle to the top of the wheel opening from a C-10? as well as theFront

I have a C-20 and I am converting it to a 1/2 ton. My measurements are:
Front: 19"
Rear: 21".

Any help will be appreciated.

SWEET7T · 01-04-2004, 03:49 PM

Try this thread, it was already discussed...

previous thread

01-04-2004, 02:44 PM	#1
WB72 Before and After Join Date: Feb 2000 Location: Leduc, Alberta CANADA Posts: 632	Stock height from axle to wheelwell opening Does anyone have a measurement from the center of the axle to the top of the wheel opening from a C-10? as well as theFront I have a C-20 and I am converting it to a 1/2 ton. My measurements are: Front: 19" Rear: 21". Any help will be appreciated. __________________ Not Grandpa's C-20 anymore... 383 Stroker 425HP, 485Ft/Lbs Lowered 3.5" Front / 5" Rear 66,000 miles. Alberta, CANADA

01-04-2004, 03:49 PM	#2
SWEET7T Try spinnin 4 rear tars Join Date: Sep 2003 Location: Salt Lake City, Utah Posts: 757	Try this thread, it was already discussed... previous thread __________________ SWEET7T 1970 C10, 2wd, LB, 307/TH350/3.08. PS, PB



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.