Tricked-out Chevy six cylinder engines - Page 26 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Twisted6 · 02-04-2014, 06:28 PM

I sure has a different look

to the normal Same O air cleaners.

TJ's Chevy · 02-07-2014, 04:53 PM

Some good sounding 6 bangers....

You Tube

You Tube

TJ's Chevy · 02-22-2014, 02:30 PM

Well I bought a better quality HEI for my 292..its from Speed Master off ebay. Capable of 7,000 RPM and has a 65,000 volt coil...and with the big carb..really burns the fuel nicely...I am running Napa premium 8 MM wires. I reved the motor to 4700 RPM when I shifted to 3rd!!!!

Almost to 5000!!!! YEAH! lol! Anyhow...here's a picture...videos to follow soon.

Twisted6 · 02-23-2014, 07:39 AM

Looking Great T.J. and I'm looking forward to see the video.

TJ's Chevy · 02-23-2014, 12:30 PM

Quote:

Originally Posted by Twisted6

Looking Great T.J. and I'm looking forward to see the video.

Thanks!

64chevtruck · 03-02-2014, 09:31 PM

Hi Guys, Heres my 292. Its got a Lump port head, Dual Holley Weber 2 barrel progressive carbs, Langdon headers, 2.5 custom exhaust w Glasspacks, Stainless push rods, propane pistons, 6 lbs shaved off the flywheel, HEI ingnition, and a Cam,,,

I have some finned sideplates im putting on it right now and changing all the hoses to stainless braided. As soon as I finish painting the firewall and inner fender wells, Ill get a new pic of it later and try to post a vid of it running,

Thanks for all the good info and threads guys

Take care

Andy

Twisted6 · 03-03-2014, 07:50 AM

Quote:

Originally Posted by 64chevtruck

Hi Guys, Heres my 292. Its got a Lump port head, Dual Holley Weber 2 barrel progressive carbs, Langdon headers, 2.5 custom exhaust w Glasspacks, Stainless push rods, propane pistons, 6 lbs shaved off the flywheel, HEI ingnition, and a Cam,,,

I have some finned sideplates im putting on it right now and changing all the hoses to stainless braided. As soon as I finish painting the firewall and inner fender wells, Ill get a new pic of it later and try to post a vid of it running,

Thanks for all the good info and threads guys

Take care

Andy

That is looking really Fine can't wait to hear some video.

64chevtruck · 03-03-2014, 05:19 PM

Thank you. Do you have a build thread? Your avatar is kickin.

sambudo · 03-14-2014, 02:58 AM

Some really good looking L6's.

Old Truck Man · 03-14-2014, 06:57 AM

The 250 in my 66 GMC short bed . Equipped with a offenhauser intake and valve cover, hedman hedders. It had a holley 390cfm four bbl. but if you don't open the 4 bbl up the gas in the rear fule bowl turns to varnish and gums everything up. Ask me how I know? So I put a 2bbl Rochester from a 283 chev on it. Its backed by a power glide trans.

TJ's Chevy · 03-14-2014, 01:02 PM

Quote:

Originally Posted by Old Truck Man

The 250 in my 66 GMC short bed . Equipped with a offenhauser intake and valve cover, hedman hedders. It had a holley 390cfm four bbl. but if you don't open the 4 bbl up the gas in the rear fule bowl turns to varnish and gums everything up. Ask me how I know? So I put a 2bbl Rochester from a 283 chev on it. Its backed by a power glide trans.

Well..that's why you floor it so the secondaries open up and let the old fuel out and fresh come in...I do that with my 292 now since I have the 600 on there. Once I get going I will leave the pedal at the floor for awhile and let the secondaries clean out. No issues yet.

Nice engine you have! I like the 2 barrel idea.

Old Truck Man · 03-14-2014, 03:39 PM

Quote:

Originally Posted by T.J. MCCAULEY

Well..that's why you floor it so the secondaries open up and let the old fuel out and fresh come in...I do that with my 292 now since I have the 600 on there. Once I get going I will leave the pedal at the floor for awhile and let the secondaries clean out. No issues yet.

Nice engine you have! I like the 2 barrel idea.

Yea Back in my younger days I constantly exercised the secondairys on everything I drove. This corn gas we have nowadays go bad really fast. Ive found that all I can find is resistor type spark plugs. And point type ignition is too weak to fire a resistor spark plug with the sorry gas. So I install a HEI distributer on everything I drive. I prefer a carter AFB carb for a 4 bbl. They have float bowls on each side that feed both the primarys & secondaries.

TJ's Chevy · 03-14-2014, 08:06 PM

Quote:

Originally Posted by Old Truck Man

Yea Back in my younger days I constantly exercised the secondairys on everything I drove. This corn gas we have nowadays go bad really fast. Ive found that all I can find is resistor type spark plugs. And point type ignition is too weak to fire a resistor spark plug with the sorry gas. So I install a HEI distributer on everything I drive. I prefer a carter AFB carb for a 4 bbl. They have float bowls on each side that feed both the primarys & secondaries.

Yeah, I am running an Edelbrock 600 on my 292 and it runs great.

TJ's Chevy · 05-02-2014, 08:29 PM

Here's a vid of us revin the snot outta the ol chevy 6. Them flow masters sound good!

http://www.youtube.com/watch?v=YoiM0nIA_7c

Twisted6 · 05-03-2014, 09:52 AM

Sounds Dang Good for what you say it has for compression.

TJ's Chevy · 05-03-2014, 09:54 AM

Quote:

Originally Posted by Twisted6

Sounds Dang Good for what you say it has for compression.

Yeah..for having only 95 pounds of compression and a chewed up cam its does darn good. lol Its really good for a cruise at 2500 RPM. Fun lil motor.

Twisted6 · 05-03-2014, 04:08 PM

I know this is not a truck But for those that have been kind a following me around I finally got the sec. cowl Hood painted. Hope you guys like it. Oh and yes the flames are embossed/ bead rolled into the hood.

Name: Hood painted.jpg
Views: 1737
Size: 76.0 KB

Name: Hood painted.jpg
Views: 1737
Size: 76.0 KB

Name: Hood painted 2.jpg
Views: 1721
Size: 62.1 KB

**Palf70Step** · 05-03-2014, 04:14 PM

Very nice Twisted!

TJ's Chevy · 05-03-2014, 04:31 PM

Nice work Larry!

Twisted6 · 05-04-2014, 01:30 PM

BiG Thanks Guys yeah this was the second hood I made it, The first one went to a Good friend of mine who I race with. the Other hood I had made also as a 2in cowl was for a impala wagon ( late 60/early 70s wagon) which also was a 2in cowl.
Again Big thanks.

Dillon Rock · 05-04-2014, 01:52 PM

Quote:

Originally Posted by Old Truck Man

The 250 in my 66 GMC short bed . Equipped with a offenhauser intake and valve cover, hedman hedders. It had a holley 390cfm four bbl. but if you don't open the 4 bbl up the gas in the rear fule bowl turns to varnish and gums everything up. Ask me how I know? So I put a 2bbl Rochester from a 283 chev on it. Its backed by a power glide trans.

Is that chain for torque purposes? Never seen that setup before.

Vernski · 05-04-2014, 04:27 PM

Quote:

Originally Posted by Dillon Rock

Is that chain for torque purposes? Never seen that setup before.

That is a redneck motor mount and is quite affective I might add...Vernski

Dillon Rock · 05-04-2014, 04:34 PM

Dig it Vernski. Lol.

jcramsey · 05-16-2014, 09:48 PM

Ran across this one today looking through a street rodder magazine at the grocery store. A 292 in a 56 chevy car. NICE!

Twisted6 · 05-17-2014, 07:52 AM

That looks Sweet Nice and Clean

02-04-2014, 06:28 PM	#626
Twisted6 Registered User Join Date: Dec 2008 Location: Daytona Beach Fla Posts: 54	Re: Tricked-out Chevy six cylinder engines I sure has a different look to the normal Same O air cleaners. __________________ Larry /aka Twisted6

02-22-2014, 02:30 PM	#628
TJ's Chevy Registered User Join Date: Mar 2013 Location: Southern Oregon Posts: 10,384	Re: Tricked-out Chevy six cylinder engines Well I bought a better quality HEI for my 292..its from Speed Master off ebay. Capable of 7,000 RPM and has a 65,000 volt coil...and with the big carb..really burns the fuel nicely...I am running Napa premium 8 MM wires. I reved the motor to 4700 RPM when I shifted to 3rd!!!! Almost to 5000!!!! YEAH! lol! Anyhow...here's a picture...videos to follow soon. Attached Images __________________ 1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw

02-23-2014, 07:39 AM	#629
Twisted6 Registered User Join Date: Dec 2008 Location: Daytona Beach Fla Posts: 54	Re: Tricked-out Chevy six cylinder engines Looking Great T.J. and I'm looking forward to see the video. __________________ Larry /aka Twisted6

03-02-2014, 09:31 PM	#631
64chevtruck Registered User Join Date: Aug 2013 Location: Rochester Wa. Posts: 395	Re: Tricked-out Chevy six cylinder engines Hi Guys, Heres my 292. Its got a Lump port head, Dual Holley Weber 2 barrel progressive carbs, Langdon headers, 2.5 custom exhaust w Glasspacks, Stainless push rods, propane pistons, 6 lbs shaved off the flywheel, HEI ingnition, and a Cam,,, I have some finned sideplates im putting on it right now and changing all the hoses to stainless braided. As soon as I finish painting the firewall and inner fender wells, Ill get a new pic of it later and try to post a vid of it running, Thanks for all the good info and threads guys Take care Andy Attached Images __________________ 64 C10 Fleetside LB 4 Sp/292 Build http://67-72chevytrucks.com/vboard/s...d.php?t=602438 70 GMC 1500 Fleetside LB 3OT/350 Build http://67-72chevytrucks.com/vboard/s...83#post6767983 76 GMC CCLB Dually Build http://67-72chevytrucks.com/vboard/s...d.php?t=691612 79 GMC 3500 Fleetside LB 454/400 90 Suburban Silverado 4x4 350/700R4 97 1500 Cheyenne Short Fleet 350/5sp

03-03-2014, 05:19 PM	#633
64chevtruck Registered User Join Date: Aug 2013 Location: Rochester Wa. Posts: 395	Re: Tricked-out Chevy six cylinder engines Thank you. Do you have a build thread? Your avatar is kickin. __________________ 64 C10 Fleetside LB 4 Sp/292 Build http://67-72chevytrucks.com/vboard/s...d.php?t=602438 70 GMC 1500 Fleetside LB 3OT/350 Build http://67-72chevytrucks.com/vboard/s...83#post6767983 76 GMC CCLB Dually Build http://67-72chevytrucks.com/vboard/s...d.php?t=691612 79 GMC 3500 Fleetside LB 454/400 90 Suburban Silverado 4x4 350/700R4 97 1500 Cheyenne Short Fleet 350/5sp

03-14-2014, 02:58 AM	#634
sambudo Registered User Join Date: Oct 2013 Location: Vancouver,Wa Posts: 339	Re: Tricked-out Chevy six cylinder engines Some really good looking L6's. __________________ 1968 C10, 250, L6 4spd OTF, Fleetside Upgrades: Power Steering .......................____ .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/

03-14-2014, 06:57 AM	#635
Old Truck Man Registered User Join Date: Feb 2014 Location: Pocahontas Arkansas Posts: 684	Re: Tricked-out Chevy six cylinder engines The 250 in my 66 GMC short bed . Equipped with a offenhauser intake and valve cover, hedman hedders. It had a holley 390cfm four bbl. but if you don't open the 4 bbl up the gas in the rear fule bowl turns to varnish and gums everything up. Ask me how I know? So I put a 2bbl Rochester from a 283 chev on it. Its backed by a power glide trans. Attached Images

05-03-2014, 09:52 AM	#640
Twisted6 Registered User Join Date: Dec 2008 Location: Daytona Beach Fla Posts: 54	Re: Tricked-out Chevy six cylinder engines Sounds Dang Good for what you say it has for compression. __________________ Larry /aka Twisted6

05-03-2014, 04:08 PM	#642
Twisted6 Registered User Join Date: Dec 2008 Location: Daytona Beach Fla Posts: 54	Re: Tricked-out Chevy six cylinder engines I know this is not a truck But for those that have been kind a following me around I finally got the sec. cowl Hood painted. Hope you guys like it. Oh and yes the flames are embossed/ bead rolled into the hood. __________________ Larry /aka Twisted6

05-03-2014, 04:14 PM	#643
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,225	Re: Tricked-out Chevy six cylinder engines Very nice Twisted! __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

05-03-2014, 04:31 PM	#644
TJ's Chevy Registered User Join Date: Mar 2013 Location: Southern Oregon Posts: 10,384	Re: Tricked-out Chevy six cylinder engines Nice work Larry! __________________ 1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw

05-04-2014, 01:30 PM	#645
Twisted6 Registered User Join Date: Dec 2008 Location: Daytona Beach Fla Posts: 54	Re: Tricked-out Chevy six cylinder engines BiG Thanks Guys yeah this was the second hood I made it, The first one went to a Good friend of mine who I race with. the Other hood I had made also as a 2in cowl was for a impala wagon ( late 60/early 70s wagon) which also was a 2in cowl. Again Big thanks. __________________ Larry /aka Twisted6

05-04-2014, 04:34 PM	#648
Dillon Rock Registered User Join Date: Dec 2012 Location: Bangor, Michigan Posts: 375	Re: Tricked-out Chevy six cylinder engines Dig it Vernski. Lol. __________________ That's the thing about a Chevrolet, no matter how they look, whether it be a trailer queen or a good ol' used farm truck, no other truck on the road will always look that damn good wearing a Bowtie.

05-16-2014, 09:48 PM	#649
jcramsey Registered User Join Date: Jun 2011 Location: Marion, NC Posts: 851	Re: Tricked-out Chevy six cylinder engines Ran across this one today looking through a street rodder magazine at the grocery store. A 292 in a 56 chevy car. NICE! Attached Images __________________ The Egg Hauler The Government Mule

05-17-2014, 07:52 AM	#650
Twisted6 Registered User Join Date: Dec 2008 Location: Daytona Beach Fla Posts: 54	Re: Tricked-out Chevy six cylinder engines That looks Sweet Nice and Clean __________________ Larry /aka Twisted6



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.