NJ parting out 71 k10 and 1972 c10 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

tedfrk · 07-19-2014, 10:22 AM

Looking to part out my two suburbans , have to bare with me it might take some time to take apart works been busy but will get it done.will take more pics when I get home.

xman · 07-19-2014, 10:50 AM

Are they barn doors or liftgate/tailgate ? If its tailgate how is the tailgate for rust? if good condition how much.

tedfrk · 07-19-2014, 11:37 AM

Both are tailgates.green one is alot better condition.I will take pics later on tonight.

**DeadheadNM** · 07-19-2014, 08:04 PM

Parchment door panels? OEM steering wheel? Condition of the GMC grill/front bumper? FYI - will need to post prices or thread will be locked by mods.

Dirt's72 · 07-19-2014, 08:52 PM

I would be interested in the dash pads, also if it has black defrost vents.

kaphillips · 07-19-2014, 10:15 PM

I am interested in some nice side view mirrors pending price and condition, thanks.

1972 Jimmy · 07-19-2014, 10:27 PM

tow hooks? Carpet strips? Ship to 48623 thanks Eric

68panelman · 07-20-2014, 03:46 PM

What's wrong with the '71 GMC? Looks pretty good for a N.East truck.

waylonbud · 07-20-2014, 05:29 PM

I am interested in the rear seat hold-down brackets and hardware and if you decide to disassemble either tailgate, a decent tailgate emblem and latch button and spring. Price and condition and shipped to 37303. Thanks.

ddman6 · 07-21-2014, 01:01 AM

I need a good headliner, driver and passenger fenders (ochre, no rust). Thanks. shipped to 78759

Dewayne

ddman6 · 07-21-2014, 01:02 AM

I also need rear seat hold down hardware and seatbelt bolts for both rear seats.

Thanks
Dewayne

ddman6 · 07-21-2014, 01:04 AM

Also, the rear sport bumper in good condition. shipped to 78759

thanks
Dewayne

ddman6 · 07-21-2014, 01:10 AM

I also need one pice of the upper trim moulding. I think i'm missing the driver door piece. I may also consider the complete set.

Thanks
Dewayne

chewiebarker · 07-21-2014, 11:01 AM

Are you really parting them both out? I thought you were just getting going with them. I could use a lot of the parts, interior and ext. and NJ isn't too far for me.

Large parts I could use are:
Driver door
Tailpan
Seats - all of them
inner and outer fenders

actually - I would consider buying a whole body, if decent enough. Perhaps we should discuss?

BigCarl · 07-21-2014, 02:09 PM

Looking for the front engine cross member from the 4wd. Where the mounts bolt to.

Thank you.

Dale99 · 07-22-2014, 01:34 PM

I would be interested in the grill if its decent. Would need shipped to 72120/72116

**72gmguy** · 07-23-2014, 08:14 PM

Why are you parting them? Are you interested in selling complete or do you think they are too far gone for some reason?

LoneRock · 07-26-2014, 10:56 AM

I'm looking for a short 2nd row and full 3rd row seat for my '69 suburban. I understand shipping is expensive, but I'm not going to have many other options since I live in north central Kansas. If you or anyone else reading this has rear seats and is willing to ship them for me, please PM me! My kid hauler project is stuck without them!

Thanks,

Ty

67swb72klb · 07-26-2014, 11:17 AM

I will get in line on the mirrors

wiggins · 07-26-2014, 11:59 AM

I be interested in the 72 doors if they are in good shape shipped to 75956 and I don't need the inner parts or glass if you want to pull them.

**71blksuper4x4** · 07-29-2014, 05:10 PM

i'm interested if the rear door panels have woodgrain on them on the 72'. Looking for a good set for my crew cab build. Thanks Trevor

**BIG ORANGE** · 08-29-2014, 09:58 PM

Do you have the factory tank straps, I would like to see pic's if you do.
thanks Donnie 29720

**restart42** · 10-19-2014, 12:41 PM

Will buy full headliner, with bows if still available,
Thanks,,,Pat

**leddzepp** · 10-19-2014, 12:57 PM

Three month old thread with no prices and no response from OP. Locking.

07-19-2014, 10:22 AM	#1
tedfrk Registered User Join Date: Feb 2005 Location: forked river nj Posts: 147	parting out 71 k10 and 1972 c10 Looking to part out my two suburbans , have to bare with me it might take some time to take apart works been busy but will get it done.will take more pics when I get home. Attached Images

07-19-2014, 10:50 AM	#2
xman Registered User Join Date: Mar 2009 Location: Channahon, IL Posts: 198	Re: parting out 71 k10 and 1972 c10 Are they barn doors or liftgate/tailgate ? If its tailgate how is the tailgate for rust? if good condition how much.

07-19-2014, 11:37 AM	#3
tedfrk Registered User Join Date: Feb 2005 Location: forked river nj Posts: 147	Re: parting out 71 k10 and 1972 c10 Both are tailgates.green one is alot better condition.I will take pics later on tonight.

07-19-2014, 08:04 PM	#4
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,447	Re: parting out 71 k10 and 1972 c10 Parchment door panels? OEM steering wheel? Condition of the GMC grill/front bumper? FYI - will need to post prices or thread will be locked by mods. __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

07-19-2014, 08:52 PM	#5
Dirt's72 Registered User Join Date: May 2013 Location: Albuquerque, NM Posts: 1,106	Re: parting out 71 k10 and 1972 c10 I would be interested in the dash pads, also if it has black defrost vents.

07-19-2014, 10:15 PM	#6
kaphillips Registered User Join Date: Jul 2013 Location: Amarillo Tx Posts: 502	Re: parting out 71 k10 and 1972 c10 I am interested in some nice side view mirrors pending price and condition, thanks.

07-19-2014, 10:27 PM	#7
1972 Jimmy Registered User Join Date: Nov 2012 Location: Freeland, Michigan Posts: 1,385	Re: parting out 71 k10 and 1972 c10 tow hooks? Carpet strips? Ship to 48623 thanks Eric

07-20-2014, 03:46 PM	#8
68panelman Registered User Join Date: Jan 2011 Location: Delaware and Long Island, New York Posts: 3,456	Re: parting out 71 k10 and 1972 c10 What's wrong with the '71 GMC? Looks pretty good for a N.East truck.

07-20-2014, 05:29 PM	#9
waylonbud Registered User Join Date: Dec 2011 Location: Athens,TN Posts: 302	Re: parting out 71 k10 and 1972 c10 I am interested in the rear seat hold-down brackets and hardware and if you decide to disassemble either tailgate, a decent tailgate emblem and latch button and spring. Price and condition and shipped to 37303. Thanks.

07-21-2014, 01:01 AM	#10
ddman6 Registered User Join Date: Oct 2013 Location: Austin, TX Posts: 56	Re: parting out 71 k10 and 1972 c10 I need a good headliner, driver and passenger fenders (ochre, no rust). Thanks. shipped to 78759 Dewayne

07-21-2014, 01:02 AM	#11
ddman6 Registered User Join Date: Oct 2013 Location: Austin, TX Posts: 56	Re: parting out 71 k10 and 1972 c10 I also need rear seat hold down hardware and seatbelt bolts for both rear seats. Thanks Dewayne

07-21-2014, 01:04 AM	#12
ddman6 Registered User Join Date: Oct 2013 Location: Austin, TX Posts: 56	Re: parting out 71 k10 and 1972 c10 Also, the rear sport bumper in good condition. shipped to 78759 thanks Dewayne

07-21-2014, 01:10 AM	#13
ddman6 Registered User Join Date: Oct 2013 Location: Austin, TX Posts: 56	Re: parting out 71 k10 and 1972 c10 I also need one pice of the upper trim moulding. I think i'm missing the driver door piece. I may also consider the complete set. Thanks Dewayne

07-21-2014, 11:01 AM	#14
chewiebarker Registered User Join Date: Feb 2014 Location: Boxford, MA Posts: 364	Re: parting out 71 k10 and 1972 c10 Are you really parting them both out? I thought you were just getting going with them. I could use a lot of the parts, interior and ext. and NJ isn't too far for me. Large parts I could use are: Driver door Tailpan Seats - all of them inner and outer fenders actually - I would consider buying a whole body, if decent enough. Perhaps we should discuss? __________________ 1971 K20 Suburban 2012 LS1500 4WD Suburban 2003 Honda Accord LX V6 (don't tell anyone) MY 'BUILD' THREAD: http://67-72chevytrucks.com/vboard/s...d.php?t=618915

07-21-2014, 02:09 PM	#15
BigCarl Registered User Join Date: Sep 2007 Location: Thunder Bay, Ontario Posts: 170	Re: parting out 71 k10 and 1972 c10 Looking for the front engine cross member from the 4wd. Where the mounts bolt to. Thank you.



Register or Log In To remove these advertisements.

07-22-2014, 01:34 PM	#16
Dale99 Registered User Join Date: Nov 2007 Location: NLR, AR Posts: 1,387	Re: parting out 71 k10 and 1972 c10 I would be interested in the grill if its decent. Would need shipped to 72120/72116 __________________ 2008 Sierra k3500 LMM 1994 s10 blazer 4x4 1991 Camaro Vert Rusted in Half RIP 1972 Jimmy 4x4 L05,4L60E,np205http://67-72chevytrucks.com/vboard/s...d.php?t=546364 1967 C10 L6/3tree(dads truck)

07-23-2014, 08:14 PM	#17
72gmguy Senior Member Join Date: Mar 2009 Location: Brigantine NJ Posts: 822	Re: parting out 71 k10 and 1972 c10 Why are you parting them? Are you interested in selling complete or do you think they are too far gone for some reason? __________________ Jeremy 1969 Blazer 4x4 original cst 1971 Blazer partial 2wd convert 1972 Blazer 4x4 original cst 1970 Blazer 4x4 w/ 2 1/2in lift and 33in tires w/4 wheel camper 1970 4x4 suburban w/ 6in lift and 35in tires 1968 Corvette convertible 1970 Malibu convertible 1959 Brookwood wagon 1972 International Scout ii

07-26-2014, 10:56 AM	#18
LoneRock Registered User Join Date: Jun 2014 Location: Vesper, KS Posts: 6	Re: parting out 71 k10 and 1972 c10 I'm looking for a short 2nd row and full 3rd row seat for my '69 suburban. I understand shipping is expensive, but I'm not going to have many other options since I live in north central Kansas. If you or anyone else reading this has rear seats and is willing to ship them for me, please PM me! My kid hauler project is stuck without them! Thanks, Ty

07-26-2014, 11:17 AM	#19
67swb72klb Registered User Join Date: Dec 2010 Location: livingston co.mi Posts: 2,471	Re: parting out 71 k10 and 1972 c10 I will get in line on the mirrors __________________ California 65 GTO---Texas 64 burb 283 ---Oklahoma 67 CST SWB BBW wood bed 327 2004r---New Mexico 72 k10 350 350 auto---Georga 72 short step project

07-26-2014, 11:59 AM	#20
wiggins Registered User Join Date: Mar 2010 Location: Deep East TEXAS Posts: 453	Re: parting out 71 k10 and 1972 c10 I be interested in the 72 doors if they are in good shape shipped to 75956 and I don't need the inner parts or glass if you want to pull them. __________________ Preserving American History one truck at a time.

07-29-2014, 05:10 PM	#21
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,156	Re: parting out 71 k10 and 1972 c10 i'm interested if the rear door panels have woodgrain on them on the 72'. Looking for a good set for my crew cab build. Thanks Trevor __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

08-29-2014, 09:58 PM	#22
BIG ORANGE Senior Member Join Date: Oct 2001 Location: Lancaster S.C. Posts: 4,764	Re: parting out 71 k10 and 1972 c10 Do you have the factory tank straps, I would like to see pic's if you do. thanks Donnie 29720 __________________ Things happen for a reason!

10-19-2014, 12:41 PM	#23
restart42 Junior Member Join Date: Apr 2000 Location: Bronx, New York City Posts: 121	Re: parting out 71 k10 and 1972 c10 Will buy full headliner, with bows if still available, Thanks,,,Pat __________________ Pat 72 GMC Suburban,4X4,402BB

10-19-2014, 12:57 PM	#24
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,031	Re: parting out 71 k10 and 1972 c10 Three month old thread with no prices and no response from OP. Locking. __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man RIP FleetsidePaul

Register or Log In To remove these advertisements.