LS1 stand alone harness expert needed

[ACII]

Hy all

after i blew up my old smallblock i decided to go with modern setup...sofinally i got a LS1 out of a CAmaro z28 of 1999.
The engine has only around 60000 miles on it....

So far the hard work is done ...the engine / transmission is sitting in the 51 pickup..

The next step is to strip the harness... i found a lot of information in the net, so i just have some last questions , as u can find in the attached file.

Hope u will find a second for me

Thanks a lot for help

CU
Achim

[47 Fasttoys]

Yes, on all accounts. Now this is assuming you will not try and have traction control or emissions.
Rob

[ls1nova71]

Looks like you prettty much have it, but double check here. Its for a 5.3, but they are real similar to a 99 LS1 http://lt1swap.com/99-02_vortec_pcm.htm

[ACII]

yes i dont need an traction control and emission stuff :-)

I assume that i can remove all the TPS to TCS wires ????

Can i generally hook up all the pink wire to the ignition power ?


I already used the LT1swap website...so far i could through it until the C100 / 101 / 105 blugs...

Hope u can help me ....

Thanks
Achim

[ls1nova71]

Yes, you can remove the TPS to TCS wires, and also yes on the pink wires , they are ignition power.General rule of thumb is pink is ignition power and orange are constant power.