70 Blazer Frame Off - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**DeadheadNM** · 10-02-2014, 04:43 PM

I looked at that K5!! Didn't realize you were searching or would have been more than happy to assist. Glad it found a good new home. Excellent work and good luck. Pete

Edit: Just curious, was shipping a real hassle?

**IronCanine** · 10-02-2014, 05:25 PM

Quote:

Originally Posted by DeadheadNM

I looked at that K5!! Didn't realize you were searching or would have been more than happy to assist. Glad it found a good new home. Excellent work and good luck. Pete

Edit: Just curious, was shipping a real hassle?

Thanks...There could have been no one better to counsel me on it...It was a bad time of year to be shipping it from Montana (late October). I ended up using a local Kalispell shipper. It had to sit in the yard for a good bit of time, so it took a while to get here...but all in all the shipper was great. And they were honest and upfront. The driver even went out of his way to deliver it to Athens so I didn't have to meet him in Atlanta...which was no small courtesy.

**IronCanine** · 10-02-2014, 05:42 PM

Quote:

Originally Posted by 71cheynne402

Looking great!!!!!

Thanks.

orange72blazer · 10-03-2014, 12:00 PM

Do you know which patch panel was used for the floor in this pic? This is about how much of the floor I need to replace on the floor of mine but the only thing I can find for the Blazer is the rear 15" or the complete floor.

**IronCanine** · 10-03-2014, 12:50 PM

Quote:

Originally Posted by orange72blazer

Do you know which patch panel was used for the floor in this pic? This is about how much of the floor I need to replace on the floor of mine but the only thing I can find for the Blazer is the rear 15" or the complete floor.

It's not a Blazer specific piece, so it requires appropriate modifications...but the whole floor wasn't available (that I'm aware of) when we got to that point. A lot of Blazer specific stuff has popped up all of a sudden now that we're through sheet metal. I tried really hard to get a patch panel off another Blazer before I caved and bought that piece.

Here's a link:

http://www.lmctruck.com/icatalog/cb/full.aspx?Page=24

NorCal · 10-03-2014, 12:57 PM

Looking bad!

**IronCanine** · 10-03-2014, 01:16 PM

Quote:

Originally Posted by NorCal

Looking bad!

Thanks...I think.

mx289 · 10-03-2014, 10:21 PM

Very nice truck.

You are making great progress.

**IronCanine** · 10-10-2014, 03:48 PM

Quote:

Originally Posted by mx289

Very nice truck.

You are making great progress.

Thanks.

**IronCanine** · 10-10-2014, 03:53 PM

Outer rockers on. Seats and console mocked in.

**IronCanine** · 10-10-2014, 03:55 PM

Top back on for the first time in a while. Rocker boxes on.

**IronCanine** · 10-10-2014, 04:02 PM

A little bit of anxiety when putting the top back on after so much metal work/replacement. It was a good feeling when things cinched up as they were supposed to.

**IronCanine** · 10-10-2014, 04:05 PM

A couple more. Not long before the body comes off and we get to start on the guts.

**IronCanine** · 10-10-2014, 05:56 PM

A driver's side view.

**thelonerife** · 10-12-2014, 07:32 PM

That looks great! I gotta do the same to mine. Although complete floors.

**IronCanine** · 10-12-2014, 09:36 PM

Quote:

Originally Posted by thelonerife

That looks great! I gotta do the same to mine. Although complete floors.

Thanks and good luck when you tear into yours.

**IronCanine** · 10-12-2014, 09:49 PM

The Blazer bolt thread is very useful. Helped make finding these visor bolts a little easier.

madkmart · 10-15-2014, 02:40 PM

great start

**IronCanine** · 10-15-2014, 10:42 PM

Quote:

Originally Posted by madkmart

great start

Thanks.

I had a mild heart attack yesterday. We put the the old door glass and regulators in along with most of the weather stripping to check the fit before the body comes off in a few days. The drivers side window gap was a joke before we started tearing into it...but as you all know this thing had been beat up, twisted and wrung out. The problem was that after all the metal work and fit improvement it was only marginally better yesterday...which is to say it was still pretty horrible. Sorry no pics, but I was too sick to take a picture, because neither of us could see where the adjustment was going to come from. Everything else fit pretty well. Top to side, top to tailgate, top to windshield...and all panel gaps

What's worse is that I had a single NOS top to glass seal for the drivers side that I hadn't opened so we tried it in place of the repro and I put a small tear in it at the door when I closed it. I could have thrown up....

...but after a restless nights sleep, a little bit of time on the board and re-visiting it today, fortunes have changed. I think I've got a couple of things going on, including an asymmetry in my top, since it fits better on the passenger's side and structures are measurably different on that side. Really the simplest and most obvious thing was to remove and reposition the weatherstip mounting track...It didn't make it perfect, but there's enough there that with some other tweaking it might not be relegated to dry clean only.

Blown06 · 10-15-2014, 10:59 PM

Heck of a start to a really cool project, hopping onboard for the ride.

**IronCanine** · 10-15-2014, 11:01 PM

Quote:

Originally Posted by Blown06

Heck of a start to a really cool project, hopping onboard for the ride.

Thanks...hang on though, it's definitely getting bumpy.

Blown06 · 10-15-2014, 11:05 PM

Quote:

Originally Posted by IronCanine

Thanks...hang on though, it's definitely getting bumpy.

I ain't skeered.

**IronCanine** · 10-18-2014, 01:02 PM

Here's where we stopped on our pre-fit with the weatherstrip in. It seals and looks right on the passenger side, though it sometimes catches and rolls in the back lip when closing the door with the window all the way up. The driver's side is decent, not as good as the passenger. We had to tweak the plastic rail positioning that holds the WS on both sides. The driver's side is going to need a little massaging of the top finish lines (drip rail and edge in front of WS) as well... which we've decided to do on the final fitment with the new glass and regulators.

Please feel free to make comments or suggestions on this one guys. I tried to dig deep in the site on this topic, but it wasn't as helpful as I'd have hoped and I could definitely be missing something.

**Tom Vogel** · 10-19-2014, 10:54 AM

You are not missing something. You are actually lucky the WS fit up that good to begin with.

**IronCanine** · 10-19-2014, 01:52 PM

Quote:

Originally Posted by Tom Vogel

You are not missing something. You are actually lucky the WS fit up that good to begin with.

Thanks...what I was afraid of.

10-02-2014, 04:43 PM	#26
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,446	Re: 70 Blazer Frame Off I looked at that K5!! Didn't realize you were searching or would have been more than happy to assist. Glad it found a good new home. Excellent work and good luck. Pete Edit: Just curious, was shipping a real hassle? __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland Last edited by DeadheadNM; 10-02-2014 at 04:49 PM.

10-03-2014, 12:00 PM	#29
orange72blazer Registered User Join Date: Dec 2003 Location: West Michigan Posts: 447	Re: 70 Blazer Frame Off Do you know which patch panel was used for the floor in this pic? This is about how much of the floor I need to replace on the floor of mine but the only thing I can find for the Blazer is the rear 15" or the complete floor. Attached Images __________________ 1972 Chevy Blazer 1997 GMC Sierra 2009 Chevy Tahoe

10-03-2014, 12:57 PM	#31
NorCal Registered User Join Date: Dec 2012 Location: intərwebz Posts: 155	Re: 70 Blazer Frame Off Looking bad! __________________ ▀▄▀▄▀▄ __www.c10crew.com__ ▄▀▄▀▄▀ ▀▄▀▄▀▄ C10CREW on Instagram ▄▀▄▀▄▀ ▀▄▀▄▀▄ The 1971 Blazer Project ▄▀▄▀▄▀

10-03-2014, 10:21 PM	#33
mx289 Registered User Join Date: May 2013 Location: wall,nj Posts: 865	Re: 70 Blazer Frame Off Very nice truck. You are making great progress. __________________ Tom 71 K2500 71 K5 Jimmy

10-10-2014, 03:53 PM	#35
IronCanine I'm trying.... Join Date: Oct 2013 Location: Athens, GA Posts: 2,753	Re: 70 Blazer Frame Off Outer rockers on. Seats and console mocked in. Attached Images

10-10-2014, 03:55 PM	#36
IronCanine I'm trying.... Join Date: Oct 2013 Location: Athens, GA Posts: 2,753	Re: 70 Blazer Frame Off Top back on for the first time in a while. Rocker boxes on. Attached Images

10-10-2014, 04:02 PM	#37
IronCanine I'm trying.... Join Date: Oct 2013 Location: Athens, GA Posts: 2,753	Re: 70 Blazer Frame Off A little bit of anxiety when putting the top back on after so much metal work/replacement. It was a good feeling when things cinched up as they were supposed to. Attached Images Last edited by IronCanine; 10-10-2014 at 04:40 PM.

10-10-2014, 04:05 PM	#38
IronCanine I'm trying.... Join Date: Oct 2013 Location: Athens, GA Posts: 2,753	Re: 70 Blazer Frame Off A couple more. Not long before the body comes off and we get to start on the guts. Attached Images Last edited by IronCanine; 10-10-2014 at 04:10 PM.

10-10-2014, 05:56 PM	#39
IronCanine I'm trying.... Join Date: Oct 2013 Location: Athens, GA Posts: 2,753	Re: 70 Blazer Frame Off A driver's side view. Attached Images

10-12-2014, 07:32 PM	#40
thelonerife Senior Member Join Date: Jul 2007 Location: Clarksville TN 37043 Posts: 8,702	Re: 70 Blazer Frame Off That looks great! I gotta do the same to mine. Although complete floors. __________________ Chuck 68swb Fleetside build ''Choncho'' http://67-72chevytrucks.com/vboard/s...d.php?t=374892 My trailer redo http://67-72chevytrucks.com/vboard/s...69#post5893869 Chuy my 59 bug http://67-72chevytrucks.com/vboard/s...d.php?t=653798 Putnam 87 GMC Shop truck http://67-72chevytrucks.com/vboard/s...d.php?t=707687

10-12-2014, 09:49 PM	#42
IronCanine I'm trying.... Join Date: Oct 2013 Location: Athens, GA Posts: 2,753	Re: 70 Blazer Frame Off The Blazer bolt thread is very useful. Helped make finding these visor bolts a little easier. Attached Images

10-15-2014, 02:40 PM	#43
madkmart Registered User Join Date: Jul 2009 Location: Covington, Ga Posts: 55	Re: 70 Blazer Frame Off great start

10-15-2014, 10:59 PM	#45
Blown06 Registered User Join Date: Oct 2012 Location: Burnet, Tx Posts: 332	Re: 70 Blazer Frame Off Heck of a start to a really cool project, hopping onboard for the ride. __________________ Me: Jarrod My project: http://www.67-72chevytrucks.com/vboa...d.php?t=646563

10-18-2014, 01:02 PM	#48
IronCanine I'm trying.... Join Date: Oct 2013 Location: Athens, GA Posts: 2,753	Re: 70 Blazer Frame Off Here's where we stopped on our pre-fit with the weatherstrip in. It seals and looks right on the passenger side, though it sometimes catches and rolls in the back lip when closing the door with the window all the way up. The driver's side is decent, not as good as the passenger. We had to tweak the plastic rail positioning that holds the WS on both sides. The driver's side is going to need a little massaging of the top finish lines (drip rail and edge in front of WS) as well... which we've decided to do on the final fitment with the new glass and regulators. Please feel free to make comments or suggestions on this one guys. I tried to dig deep in the site on this topic, but it wasn't as helpful as I'd have hoped and I could definitely be missing something. Attached Images

10-19-2014, 10:54 AM	#49
Tom Vogel 2WD Jimmy Join Date: Mar 2005 Location: Davis County, Utah Posts: 2,565	Re: 70 Blazer Frame Off You are not missing something. You are actually lucky the WS fit up that good to begin with.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.