What emblem do I need? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

5150 · 12-23-2014, 06:56 AM

I've been slowly fixing up my 87 SWB and I decided to put a pair of emblems on the fenders. Since I've owned it it's never had any emblems on it. It has the holes for the emblems but I don't know the correct one. The holes are 8 inches apart. Any help would be appreciated. Might go junkyarding after Christmas and I'd like to know what I'm looking for.

tucsonjwt · 12-23-2014, 08:34 AM

It depends on your model and year - Scottsdale, Silverado, C10, C20 etc. Personally, I removed all emblems and am having the mounting holes welded shut and ground off.

**brakenit** · 12-23-2014, 11:55 AM

If it's a base model truck with manual windows/locks then you're most likely looking for a Custom Deluxe 10 emblem. Does it still have the emblem on the dash trim?

The fender emblems will look like this:
http://www.ebay.com/itm/81-87-Chevro...ac12f8&vxp=mtr

Keith Seymore · 12-23-2014, 12:14 PM

Well done, you two.

I agree, except it might be a Scottsdale since it has the chrome trim around the taillamps (Custom Deluxe did not get that chrome trim).

Base = Custom Deluxe
Z62 = Scottsdale (normally base grille and black side trim; could be had with uplevel grill by adding RPO V22 and chrome side trim with B85).
YE9 = Silverado.

Personally, I removed my emblems, too, and filled the holes. I never liked them even when new.

K

5150 · 12-23-2014, 12:25 PM

I do plan on getting a roll of the chrome molding and putting it on. My buddy just did this truck to flip and I really liked it.

Bigstevex4 · 12-23-2014, 06:06 PM

This 83 custom deluxe
Name: tr.jpg
Views: 194
Size: 29.0 KB

Axle · 12-23-2014, 11:20 PM

Anyone know if the early, above the belt line script style emblems also are 8" hole to hole? I don't particularly care for the blocky style emblems, kinda dig the 70's script ones.

Alex.

Bigstevex4 · 12-24-2014, 10:44 AM

I thought about putting these on my 83 its missing passanger side. Just for the Hell of it. One of the pins got broke in Shipment lunker head just threw them loose togather in a bubble envolope. luckely only paid 20 bucks for them.
Name: 10_emblem_chevy_c10-pickup_64_sm.jpg
Views: 116
Size: 27.6 KB

Name: 10_emblem_chevy_c10-pickup_64_sm.jpg
Views: 116
Size: 27.6 KB

tucsonjwt · 12-24-2014, 11:49 AM

I am removing the side trim also, and your truck is already there.

12-23-2014, 06:56 AM	#1
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	What emblem do I need? I've been slowly fixing up my 87 SWB and I decided to put a pair of emblems on the fenders. Since I've owned it it's never had any emblems on it. It has the holes for the emblems but I don't know the correct one. The holes are 8 inches apart. Any help would be appreciated. Might go junkyarding after Christmas and I'd like to know what I'm looking for. __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4 Last edited by 5150; 12-23-2014 at 07:23 AM.

12-23-2014, 08:34 AM	#2
tucsonjwt Registered User Join Date: Jul 2007 Location: Tucson, AZ Posts: 3,189	Re: What emblem do I need? It depends on your model and year - Scottsdale, Silverado, C10, C20 etc. Personally, I removed all emblems and am having the mounting holes welded shut and ground off.

12-23-2014, 11:55 AM	#3
brakenit Active Member Join Date: Mar 2004 Location: Indiana Posts: 198	Re: What emblem do I need? If it's a base model truck with manual windows/locks then you're most likely looking for a Custom Deluxe 10 emblem. Does it still have the emblem on the dash trim? The fender emblems will look like this: http://www.ebay.com/itm/81-87-Chevro...ac12f8&vxp=mtr

12-23-2014, 12:14 PM	#4
Keith Seymore Registered User Join Date: May 2009 Location: Motor City Posts: 9,226	Re: What emblem do I need? Well done, you two. I agree, except it might be a Scottsdale since it has the chrome trim around the taillamps (Custom Deluxe did not get that chrome trim). Base = Custom Deluxe Z62 = Scottsdale (normally base grille and black side trim; could be had with uplevel grill by adding RPO V22 and chrome side trim with B85). YE9 = Silverado. Personally, I removed my emblems, too, and filled the holes. I never liked them even when new. K Attached Images __________________ Chevrolet Flint Assembly 1979-1986 GM Full Size Truck Engineering 1986 - 2019 Intro from an Old Assembly Guy: http://67-72chevytrucks.com/vboard/s...d.php?t=342926 My Pontiac story: http://forums.maxperformanceinc.com/...d.php?t=560524 Chevelle intro: http://www.superchevy.com/features/s...hevy-chevelle/ Last edited by Keith Seymore; 12-23-2014 at 12:23 PM.

12-23-2014, 12:25 PM	#5
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Re: What emblem do I need? I do plan on getting a roll of the chrome molding and putting it on. My buddy just did this truck to flip and I really liked it. __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

12-23-2014, 06:06 PM	#6
Bigstevex4 Registered User Join Date: Oct 2014 Location: Spearfish South Dakota Posts: 407	Re: What emblem do I need? This 83 custom deluxe

12-23-2014, 11:20 PM	#7
Axle Registered User Join Date: Jul 2011 Location: SW Ontario Posts: 1,212	Re: What emblem do I need? Anyone know if the early, above the belt line script style emblems also are 8" hole to hole? I don't particularly care for the blocky style emblems, kinda dig the 70's script ones. Alex.

12-24-2014, 10:44 AM	#8
Bigstevex4 Registered User Join Date: Oct 2014 Location: Spearfish South Dakota Posts: 407	Re: What emblem do I need? I thought about putting these on my 83 its missing passanger side. Just for the Hell of it. One of the pins got broke in Shipment lunker head just threw them loose togather in a bubble envolope. luckely only paid 20 bucks for them.

12-24-2014, 11:49 AM	#9
tucsonjwt Registered User Join Date: Jul 2007 Location: Tucson, AZ Posts: 3,189	Re: What emblem do I need? I am removing the side trim also, and your truck is already there.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.