CT WTB: perimeter springs for my seat frame

[markmdz]

I just stripped the cover off my bench seat on my '68 and found the drivers side main perimeter spring and both driver and pass side support springs busted. Before I buy a length of edgewire and go through the pains of building a new one to match the broken factory ones, does anyone out there have these in good shape that I could buy off 'em?

Also looking for the rod, clip, spring, etc for the slide release mech on the seat bottom.

[markmdz]

anyone? I really don't want to have to go make these springs, or go junkyard diving right now. It's just too damn cold to walk through the pick'n'pull.

[markmdz]

last try before I end up buying some spring stock and making my own. ...someone's gotta have a seat frame that they don't want to sell complete and has good springs.

[budnikguy]

http://67-72chevytrucks.com/vboard/s...d.php?t=590647

[mgkgmc]

Im going to part out a bench bottom but I need a few for mine on the driver side of course. But if you have a picture of the ones you'll need I'll see if I have some left.

[markmdz]

Originally Posted by mgkgmc

Im going to part out a bench bottom but I need a few for mine on the driver side of course. But if you have a picture of the ones you'll need I'll see if I have some left.

I may have borrowed this pic from budnick, but it best shows the spring i'm looking for.



I need that larger spring that's on the end of the seat. ...both passenger and driver sides are busted on mine. The regular z springs are in great shape.

[markmdz]

anyone? with all the snow we're getting, i'm relegated to doing whatever I can get done inside. I can't get the upholstery done until I repair the foam, and I shouldn't repair the foam until I repair the broken springs. ...so I'm at a bit of a sticking point at the moment.

[markmdz]

Someone's gotta have these springs.

[mgkgmc]

The ones I had were broken. I thought they were in better shape. Sorry