C10 vs C20 ball joints, control arm mount - The 1947 - Present Chevrolet & GMC Truck Message Board Network

slotard · 01-11-2015, 04:48 PM

The previous owner of my truck just found some parts around that he gave me. Looking at the receipts, I think they may have been for the C10 he had previously (also square body, 77 maybe?). Two sets of ball joints (only one set shown in pics), a PS hose, and a control arm shaft.

Can I use any of these on the C20, or should I sell them?

beamn7 · 01-15-2015, 10:02 PM

The only thing you might be able to use is the p/s hose. Maybe... The bushings, ball joints and shaft are different on C10 vs. C20/C30

01-11-2015, 04:48 PM	#1
slotard Registered User Join Date: Nov 2014 Location: Alameda, CA Posts: 877	C10 vs C20 ball joints, control arm mount The previous owner of my truck just found some parts around that he gave me. Looking at the receipts, I think they may have been for the C10 he had previously (also square body, 77 maybe?). Two sets of ball joints (only one set shown in pics), a PS hose, and a control arm shaft. Can I use any of these on the C20, or should I sell them? __________________ 1973 C20, 350/350

01-15-2015, 10:02 PM	#2
beamn7 Registered User Join Date: Oct 2011 Location: Wildomar, CA Posts: 466	Re: C10 vs C20 ball joints, control arm mount The only thing you might be able to use is the p/s hose. Maybe... The bushings, ball joints and shaft are different on C10 vs. C20/C30



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.