56 L92 T-10 build started - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Silvy423 · 01-11-2015, 09:35 PM

Got the parallel 4 link built and installed. I went with a set of QA1 coilovers at first but then ran into a issue up front. I want the truck to sit low but with the 84 chassis it's so wide it leaves no room for the wheels while turning. So scew it just air ride the whole truck. So in the process of air ride and my engine harbess I'm installing a military grade cannon plug at the firewall.

faribran · 01-12-2015, 10:04 AM

Engine sounds great! I see you got the BIG back window in place...looking good sir

Silvy423 · 01-12-2015, 12:17 PM

Quote:

Originally Posted by faribran

Engine sounds great! I see you got the BIG back window in place...looking good sir

Yeah the back window transplant was a pain in the ass, but worth every bit of it. Should be on the road by the end of March.

Silvy423 · 01-26-2015, 12:01 AM

Working on getting the procharger intercooler installed. I will have to run a custom grille, price you pay for something different. I also split the harness in half so I could mount the ECM in the cab. Mil spec cannon plugs. 78 wires to cut and pin crimp, no fun!

akdg87 · 01-26-2015, 02:49 PM

i used a CX racing universal intercooler (27" x 11" x 3") for mine, it fits better than that pro-charger setup, sits about a inch back from the outside lip of the grill shell (still need a custom grill).

SierraMtns · 01-27-2015, 01:24 PM

Nice build. Thanks for sharing. I like the Mil spec cannon plug idea.

Silvy423 · 01-27-2015, 01:27 PM

Thanks, I couldn't see mounting the ECM under the truck, plus it's so easy to remove the harness now and damn it looks awsome! Very very time consuming.

Silvy423 · 01-28-2015, 12:58 PM

Been thinking long and hard about trying the powered rack and pinion install. After reading up on it I went ahead and ordered a 86 Thunderbird rack, $55! So here we go.

faribran · 01-28-2015, 06:50 PM

Keep it up. I am enjoying your progress

Silvy423 · 04-01-2015, 12:06 AM

Been some time since I posted, been some good progress and some big changes. I decided to buy a 57 front end and sell the 56, the hood and fenders on the 57 are damn nice and OEM, I like them. I'm thinking I will shoot the entire truck with old school red primer and then a white and pull the white back down a little and leave it for a few years.

I also completely finished the 4 link and built it all myself

Had some Intro wheels built 20x8.5 and 20x13, had to cut and narrow the rear end

Had the chevy astro van rear seat recovered and got the billet specialties column and wheel put in

Got the front air ride done with tubular control arms upper and lower and added bag plates

Silvy423 · 04-01-2015, 12:07 AM

Can I get a moderator to move this to the build thread?

Silvy423 · 12-21-2015, 07:31 PM

Been some time since I updated this. Been driving the hell out of the truck, no issues at all. Have just over 3k miles on the new build. Nothing is good enough for me, the truck made some good power on the Dyno 445 RWHP with the cammed LS3, but now I'm adding the LSA blower! Should be fun

01-11-2015, 09:35 PM	#51
Silvy423 Registered User Join Date: Jul 2013 Location: Casa Grande Az Posts: 50	Re: 56 L92 T-10 build started Got the parallel 4 link built and installed. I went with a set of QA1 coilovers at first but then ran into a issue up front. I want the truck to sit low but with the 84 chassis it's so wide it leaves no room for the wheels while turning. So scew it just air ride the whole truck. So in the process of air ride and my engine harbess I'm installing a military grade cannon plug at the firewall.

01-12-2015, 10:04 AM	#52
faribran Registered User Join Date: Jul 2005 Location: AL Posts: 1,828	Re: 56 L92 T-10 build started Engine sounds great! I see you got the BIG back window in place...looking good sir __________________ "

01-26-2015, 12:01 AM	#54
Silvy423 Registered User Join Date: Jul 2013 Location: Casa Grande Az Posts: 50	Re: 56 L92 T-10 build started Working on getting the procharger intercooler installed. I will have to run a custom grille, price you pay for something different. I also split the harness in half so I could mount the ECM in the cab. Mil spec cannon plugs. 78 wires to cut and pin crimp, no fun!

01-26-2015, 02:49 PM	#55
akdg87 Registered User Join Date: Sep 2013 Location: fairbanks, ak Posts: 339	Re: 56 L92 T-10 build started i used a CX racing universal intercooler (27" x 11" x 3") for mine, it fits better than that pro-charger setup, sits about a inch back from the outside lip of the grill shell (still need a custom grill). __________________ build thread 1955 cameo turbo lsx 1993 K1500 Blazer 5.3/4L80e 2009 CTSV Sedan

01-27-2015, 01:24 PM	#56
SierraMtns Registered User Join Date: Jun 2014 Location: Shingle Springs, CA Posts: 869	Re: 56 L92 T-10 build started Nice build. Thanks for sharing. I like the Mil spec cannon plug idea.

01-27-2015, 01:27 PM	#57
Silvy423 Registered User Join Date: Jul 2013 Location: Casa Grande Az Posts: 50	Re: 56 L92 T-10 build started Thanks, I couldn't see mounting the ECM under the truck, plus it's so easy to remove the harness now and damn it looks awsome! Very very time consuming.

01-28-2015, 12:58 PM	#58
Silvy423 Registered User Join Date: Jul 2013 Location: Casa Grande Az Posts: 50	Re: 56 L92 T-10 build started Been thinking long and hard about trying the powered rack and pinion install. After reading up on it I went ahead and ordered a 86 Thunderbird rack, $55! So here we go.

01-28-2015, 06:50 PM	#59
faribran Registered User Join Date: Jul 2005 Location: AL Posts: 1,828	Re: 56 L92 T-10 build started Keep it up. I am enjoying your progress __________________ "

04-01-2015, 12:06 AM	#60
Silvy423 Registered User Join Date: Jul 2013 Location: Casa Grande Az Posts: 50	Re: 56 L92 T-10 build started Been some time since I posted, been some good progress and some big changes. I decided to buy a 57 front end and sell the 56, the hood and fenders on the 57 are damn nice and OEM, I like them. I'm thinking I will shoot the entire truck with old school red primer and then a white and pull the white back down a little and leave it for a few years. I also completely finished the 4 link and built it all myself Had some Intro wheels built 20x8.5 and 20x13, had to cut and narrow the rear end Had the chevy astro van rear seat recovered and got the billet specialties column and wheel put in Got the front air ride done with tubular control arms upper and lower and added bag plates

04-01-2015, 12:07 AM	#61
Silvy423 Registered User Join Date: Jul 2013 Location: Casa Grande Az Posts: 50	Re: 56 L92 T-10 build started Can I get a moderator to move this to the build thread?

12-21-2015, 07:31 PM	#62
Silvy423 Registered User Join Date: Jul 2013 Location: Casa Grande Az Posts: 50	Re: 56 L92 T-10 build started Been some time since I updated this. Been driving the hell out of the truck, no issues at all. Have just over 3k miles on the new build. Nothing is good enough for me, the truck made some good power on the Dyno 445 RWHP with the cammed LS3, but now I'm adding the LSA blower! Should be fun



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.