|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
03-11-2015, 07:39 PM
|
#1 |
|
Registered User
Join Date: Jun 2013
Location: Golden valley
Posts: 11
|
Rochester B on a 261 Problems
I just rebuilt the carb because the accelerator pump was bad. Now it starts right up, idles great, accelerates fine but it wont run steady at about 1800 to 2400 rpm. In that range it spits and sputters pretty bad. Any ideas. By the way. New plugs, electronic distributor, and timing set. I'm stumped. Thanks in advance for any help.
|
|
|
|
03-11-2015, 10:28 PM
|
#2 |
|
Hollister Road Co.
Join Date: Apr 2005
Location: Houston
Posts: 6,131
|
Re: Rochester B on a 261 Problems
loose jets will do that. coil field collapse will do that also
|
|
|
|
|
03-11-2015, 10:35 PM
|
#3 |
|
Registered User
Join Date: Jun 2013
Location: Golden valley
Posts: 11
|
Re: Rochester B on a 261 Problems
I don't know what you mean by coil field collapse. Could you please explain. Thank you
|
|
|
|
|
03-11-2015, 10:45 PM
|
#4 |
|
Registered User
Join Date: Oct 2005
Location: Overland Park, Ks.
Posts: 5,229
|
Re: Rochester B on a 261 Problems
Too much ign. advance can cause a condition like that. Try running it with the vacuum disconnected.
|
|
|
|
|
03-11-2015, 10:47 PM
|
#5 |
|
Registered User
Join Date: Jun 2013
Location: Golden valley
Posts: 11
|
Re: Rochester B on a 261 Problems
Thanks, I'll try that.
|
|
|
|
|
03-12-2015, 08:46 PM
|
#6 |
|
Registered User
Join Date: Jun 2013
Location: Golden valley
Posts: 11
|
Re: Rochester B on a 261 Problems
When I plugged the vacuum line the problem went away. Now I know the advance was my issue. Thanks for the tip.
|
|
|
|
|
| Bookmarks |
|
|
Linear Mode
