My edc project

[ironadict]

I recently decide to swap my motor for a nice fresh rebuilt sbc. Sooooo I figured while I was doing that I might as well swap trans. So I went for a 700r4. Theeeeen I figured while I have everything out I should paint the fire wall. Etc etc etc.
On top of these things I also decided to upgrade to an engine driven compressor. Naturally I went with the york 210. I checked the local yard but it seemed like all the doners were already picked clean. So I got a rebuilt on on eBay for about $150. This was the easy part. The hard part was finding a way to mount it. The engine I got had a lwp and no holes in the heads for brackets. They only place I could find good brackets was from Alangrovecomponents.com. Unfortunately he only had a bracket for a sanden comp. so I took this and modified it for a york 210. This is what I came up with. Hopefully the pic works
Posted via Mobile Device

[ironadict]

The suction is on top. My biggest pet peeve when making this bracket was making sure the belt lined up perfect. I've seen some pretty scanned together stuff so I wanted this to line up right. Here are some pics of it powder coated and mounted with rest of brackets

[ironadict]

Looks like I have to do one at a time.

[ironadict]

Here is finished product unplumbed. So since I have ordered all parts to plumb it up and I will update this as I go. Really looking forward to seeing that psi needle going up faster with this.

[ironadict]

At show next day