AZ 73 K5 Blazer for parts

[t korinek]

Just brought this 73 K5 in yesterday for parts

Front seats, console & gauge bezel are gone, everything else is pretty much still there.

350 engine, turbo 350 trans, 203 t case, dana 44 front & 12 bolt posi rear all the big heavy parts are local pick up only.

Dash pad has been recovered some time ago, so not as good as it looks $60

Door panels with arm rests, door pockets $135 Pair ,the woodgrain at the top of door is burnt, plastic itself is pretty good.

Instrument cluster with clock, no tach $65

Doors $150 ea without door panels.

Hood in good shape $150

Spare tire carriers $350 for the pair

Front bumper $75

Any other parts ask & I'll price, all prices are + shipping & this is also for parts locally.

Thanks,
Tom

[t korinek]

Some more pics of the interior.

[dragonball98312]

How much for front k5 fender emblems?

[t korinek]

Originally Posted by dragonball98312

How much for front k5 fender emblems?

$75 shipped
Posted via Mobile Device

[dragonball98312]

More than I was looking to spend thank you anyways

[74CustomK20]

How much for the wiper switch shipped to 47586?

[71blksuper4x4]

Tim, how nice are the emblems pitting wise? Also, condition of the rubber flooring under the carpet. Thanks Trevor

[too much stuff]

Is that an 8" wheel on back? How much if so...

[t korinek]

toomuchstuff, I don't think its 8" wide, looks like 6 1/2" or maybe 7"

71blksuper4x4 I'll have to look at the emblems closer, rubber mat under the front or back? not sure if theres any under the carpet thats in there but I'll look.

74CustomK20 $17 shipped for the wiper switch, I'll have to check & see if its still in good shape or not.

dragonball, no problem, I was hoping not to have to take the front clip off first thing to get the emblems off, .

Thanks,
Tom

[71blksuper4x4]

Hey Tom, the rubber leveling mats for the bed floor. I have found them in these blazers under the carpet. Thanks Trevor

[too much stuff]

The wheel looks like it has some dish to it, but hard to tell for sure. If it ends up being an 8", let me know.

[74CustomK20]

Originally Posted by t korinek

74CustomK20 $17 shipped for the wiper switch, I'll have to check & see if its still in good shape or not.

Thanks,
Tom

Let me know please!

[mongoose45056]

I am interested in the rear side panels and the trim mouldings on both. Also does the truck have the sill mouldings that go from the door opening up to the front rear carpet hold down? Please let me know the cost of these. Shipping to 45056.

[mongoose45056]

Tom also want the cover plate for the top wiring disconnect! Please advise cost and shipping for these and I will send payment. Thank you.

[Sabaka454]

I need a center console for my 75 Blazer. How is the one in this? If available I am interested

[Sabaka454]

I just saw you said console is gone. Sorry

[DownLowHoe]

Looks like this one could be easily saved.

[old Rusty C10]

behind the grille the center support that goes from the the rad support to the top and the grille mounts this is one from a 79 but this piece how much shipped to 07731

[t korinek]

Heres the center grill support $35 shipped

mongoose45056 how about $175 for the rear panels & the panel trim pieces, cover plate, sill plates + shipping

DownLowHoe, it could be saved, but nobody is saving these lately, worth more as a parts donor.

74 customK20, switch looks good, I have no way to test it, let me know if you still want it.

too much stuff will do

71blksuper4x4 The rear leveling mat is under the 3 layers of carpet, I'll get it out & see what shape its in, the emblems have no pitting.

[t korinek]

more pics

[t korinek]

some more of the options added on to this rig

[t korinek]

More pics

[71blksuper4x4]

Tom, ill take the emblems and wait to hear back on the rubber floor. Trevor

[old Rusty C10]

Originally Posted by t korinek

Heres the center grill support $35 shipped

.

right now due to a pending duispute im not able to paypal you please message your address and I will either mail you a check or money order consider this piece sold

[t korinek]

Anybody know what the optional axle ratio would be as listed on the spid as option 1ZN8? I'm looking right now out of curiosity, I've done the search & seen where people have asked before, but with no real answer.
Thanks
tom