|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
06-29-2015, 03:38 PM
|
#51 |
|
Registered User
Join Date: Aug 2011
Location: Manitowoc WI
Posts: 67
|
Re: 1970 3/4 step side puller build (blue blood)
So I have been working on engine during this time and have it assembled almost ready to go in truck. Its a 454 crate motor from Gm. I changed pistons to 9-7-1 compression Ported the peanut port heads to flow 260cfm at 600 lift put a factory holley cast iron intake on off 60s 427 vet motor and ported some vortech exhaust manifolds to make it a stock looking torque monster.
|
|
|
|
06-29-2015, 03:41 PM
|
#52 |
|
Registered User
Join Date: Aug 2011
Location: Manitowoc WI
Posts: 67
|
Re: 1970 3/4 step side puller build (blue blood)
I even found a duel snorkel air cleaner and added holes to rear so it would look old and still make hp
|
|
|
|
|
06-29-2015, 03:46 PM
|
#53 |
|
Registered User
Join Date: Aug 2011
Location: Manitowoc WI
Posts: 67
|
Re: 1970 3/4 step side puller build (blue blood)
Also I have a set of hooker 1 7/8 headers that I had jet coated brand new in box if anyone is interested? I need to run cast iron intake and exhaust manifolds because I plan to do some stock class truck pulling with her
|
|
|
|
|
07-16-2015, 11:22 AM
|
#54 |
|
Registered User
Join Date: Aug 2011
Location: Manitowoc WI
Posts: 67
|
Re: 1970 3/4 step side puller build (blue blood)
Have the motor finished! Decided to run March serpentine set up and really happy with kit. Beats the heck out of stock stamped pulleys that I had problems in the past throwing belts at high rpm.
|
|
|
|
|
07-16-2015, 11:27 AM
|
#55 |
|
Registered User
Join Date: Aug 2011
Location: Manitowoc WI
Posts: 67
|
Re: 1970 3/4 step side puller build (blue blood)
here are pictures
|
|
|
|
|
07-16-2015, 11:38 AM
|
#56 |
|
Registered User
Join Date: Aug 2011
Location: Manitowoc WI
Posts: 67
|
Re: 1970 3/4 step side puller build (blue blood)
Also started cutting gauges into instrument panel. Though 2 5/8 auto meters gauges would fit but figured wrong. They are in but not real happy I could not keep them level with each other because of rear backing panel. I should have bought 2" gauges!
|
|
|
|
|
07-23-2015, 09:42 AM
|
#57 |
|
Registered User
Join Date: Aug 2011
Location: Manitowoc WI
Posts: 67
|
Re: 1970 3/4 step side puller build (blue blood)
Its been like Christmas morning around my shop! UPS just keeps dropping off cool stuff! But my credit card is hot. Was better when Santa Clause did not charge my Card LOL. Just installed power brake master cylinder for disc brakes and received a text from body shop with some blue paint getting put on fenders
|
|
|
|
|
07-23-2015, 01:09 PM
|
#58 |
|
Registered User
Join Date: Nov 2014
Location: Toledo Ohio
Posts: 520
|
Re: 1970 3/4 step side puller build (blue blood)
Awesome! This is by far my favorite build on the forum, this and 1972gmc's k2500 build!
|
|
|
|
|
07-24-2015, 09:26 PM
|
#59 |
|
Registered User
Join Date: Oct 2007
Location: Spanaway
Posts: 8,451
|
Re: 1970 3/4 step side puller build (blue blood)
I love it when color starts showing on these build threads!
__________________
Mike. Swamp Rat build thread : http://67-72chevytrucks.com/vboard/s...d.php?t=595019 72 3/4T 4X4 4" BDS Lift 33" BFG's |
|
|
|
|
07-28-2015, 10:08 AM
|
#60 |
|
Registered User
Join Date: Aug 2011
Location: Manitowoc WI
Posts: 67
|
Re: 1970 3/4 step side puller build (blue blood)
I spent the week working on brakes. Should not have been this hard but nothing matched up from swapping in dana 60 front. Ended up bending all new front lines. Also thought I had wrong calipers but finally figured out that I was a dumb ass and was not putting shim in right place to hold caliper LOL
|
|
|
|
|
07-28-2015, 10:13 AM
|
#61 |
|
Registered User
Join Date: Aug 2011
Location: Manitowoc WI
Posts: 67
|
Re: 1970 3/4 step side puller build (blue blood)
Also picked up fenders. Only inside of them finished so I can install engine spray outside truck all at once when we get that far....
|
|
|
|
|
07-28-2015, 10:19 AM
|
#62 |
|
Registered User
Join Date: Aug 2011
Location: Manitowoc WI
Posts: 67
|
Re: 1970 3/4 step side puller build (blue blood)
I installed my dash and started some of the wiring. Truck has new painless wiring harness and so far fits nicely. Also had to cut hole in floor to put high hump in to clear trans better.
|
|
|
|
|
08-17-2015, 12:47 PM
|
#63 |
|
Registered User
Join Date: Aug 2011
Location: Manitowoc WI
Posts: 67
|
Re: 1970 3/4 step side puller build (blue blood)
Its all the little things that take a lot of time. I thought I would have motor fired by now but being I changed back to exhaust manifolds they did not fit between my fabbed motor mounts. Had to pull manifolds and cut mounts to get motor to fit. But look at all the fire wall room! Moving engine ahead helped that problem.
|
|
|
|
|
08-17-2015, 01:00 PM
|
#64 |
|
Registered User
Join Date: Aug 2011
Location: Manitowoc WI
Posts: 67
|
Re: 1970 3/4 step side puller build (blue blood)
Being moved engine ahead went with hydraulic clutch setup from Novak. Nice kit but does not bolt up with out some fabbing like most things!
|
|
|
|
|
08-17-2015, 01:07 PM
|
#65 |
|
Registered User
Join Date: Aug 2011
Location: Manitowoc WI
Posts: 67
|
Re: 1970 3/4 step side puller build (blue blood)
Finished exhaust. Made some 2 1/2 to 3" collectors and fabbed exhaust all stainless. I mig welded exhaust this time. Not as pretty as tig but do not own tig welder and did not feel like pulling exhaust off to bring to welding shop.
|
|
|
|
|
08-17-2015, 01:11 PM
|
#66 |
|
Registered User
Join Date: Aug 2011
Location: Manitowoc WI
Posts: 67
|
Re: 1970 3/4 step side puller build (blue blood)
Also made new throttle linkage. Worked great till I tried to put air cleaner on Grrrr Back to drawing board!
|
|
|
|
|
08-17-2015, 03:20 PM
|
#67 |
|
Registered User
Join Date: Nov 2014
Location: Toledo Ohio
Posts: 520
|
Re: 1970 3/4 step side puller build (blue blood)
Awesome! Making some progress!
|
|
|
|
|
08-18-2015, 12:55 PM
|
#68 |
|
Registered User
Join Date: Jun 2006
Location: Indiana
Posts: 4,859
|
Re: 1970 3/4 step side puller build (blue blood)
So what gas are you running with the SS wire?
__________________
'70 GMC C1500 LWB Power disc brakes. WooHoo! Posi 6 Lug Dana 60 |
|
|
|
|
08-19-2015, 04:59 PM
|
#69 |
|
Registered User
Join Date: Jun 2012
Location: Frankfort, Kansas
Posts: 33
|
Re: 1970 3/4 step side puller build (blue blood)
Where did you get the 10 leaf rear springs from? Were these from a donor truck or bought new?... Thanks! Love the stock puller/resto combo
__________________
87 Chevy K20 - 350 Turbo 400 SOLD 72 Chevy K20 - 350 4spd, 2.5 skyjacker lift, 33 inch BFG's, Extreme bend hooks and Slots - SOLD 2016 85 Chevy K30 - 350 4spd |
|
|
|
|
08-20-2015, 09:27 AM
|
#70 |
|
Registered User
Join Date: Aug 2011
Location: Manitowoc WI
Posts: 67
|
Re: 1970 3/4 step side puller build (blue blood)
I just added leaves to stock springs. I bought one set of add a leafs and the rest where just used leaves I had from donor truck. I did switch to Off Road Design flip u bolts. They are supposed to be stronger. I also changed spring perches to solid iron blocks because I twisted and crushed stock ones in past pulling days!
|
|
|
|
|
02-02-2016, 12:24 AM
|
#71 |
|
Registered User
Join Date: Jan 2015
Location: napa, ca
Posts: 249
|
Re: 1970 3/4 step side puller build (blue blood)
Bump
__________________
Mine: 72 c20 Chevy suburban, 02 5.3 w/4l60e , factory ac and 50gal tank. 70 k10 Chevy burb, 04 5.3 w/4l60e np241, with dual 30gal saddle tanks and rear 30 gal tank Dads: 67 c10 step side(project) 72 c10 GMC burb 350/400, with 67 Chevy front clip(grocery getter) Ours: 67 c30 tow truck 70 c10 long bed 383stroker w/digital gauges(work truck) |
|
|
|
|
02-15-2016, 09:23 PM
|
#72 |
|
user # 2756
 
Join Date: Jun 2001
Location: Chesapeake, Virginia
Posts: 4,612
|
Re: 1970 3/4 step side puller build (blue blood)
Awesome truck, any updates?
__________________
1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm 
|
|
|
|
|
03-16-2016, 11:45 AM
|
#73 |
|
Registered User
Join Date: Aug 2011
Location: Manitowoc WI
Posts: 67
|
Re: 1970 3/4 step side puller build (blue blood)
Truck is painted!! Here are a few pics
|
|
|
|
|
03-16-2016, 11:55 AM
|
#74 |
|
Registered User
Join Date: Aug 2011
Location: Manitowoc WI
Posts: 67
|
Re: 1970 3/4 step side puller build (blue blood)
Here is picture of box with fuel tank and bed wood installed. Body shop is doing final buff and I am picking truck up Friday will post more pictures. Excited!
|
|
|
|
|
03-17-2016, 10:24 PM
|
#75 |
|
Tool Addiction=Money Shortage
Join Date: Mar 2006
Location: Grand Forks, ND
Posts: 233
|
Re: 1970 3/4 step side puller build (blue blood)
Sexy looking rig. I enjoy seeing your attention to detail.
__________________
1967 K20 400TBI SM465/NP205 posi front, Detroit locker 4.56 rear |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
