400" 4-Bolt with .030" over Forged TRW's - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

GSXMEN · 02-17-2004, 12:55 PM

Still in need of a buyer.

Thanks.

FirstGen · 02-17-2004, 04:14 PM

I have about 700 bucks for you! haha Good Luck on a sale!!!

GSXMEN · 02-18-2004, 01:44 PM

Thanks!! I can't believe it's been so difficult to sell good parts??

Had alot of interest....but, nobody has closed the deal - yet.

FirstGen · 02-18-2004, 04:39 PM

I think shipping kills alot of the deal bummer!

GSXMEN · 02-19-2004, 02:12 AM

I hear ya on that one!! I've checked shipping to OH, FL, & CA.....prices have varied from $110-$220.

GSXMEN · 02-22-2004, 01:21 AM

TTT

GSXMEN · 02-27-2004, 10:45 PM

Back up top.

A buyer is out there somewhere!!

GSXMEN · 03-14-2004, 04:20 AM

Let's try this again.

FirstGen · 03-14-2004, 04:28 AM

I replied to your other post in the engine section...

GSXMEN · 03-25-2004, 02:45 AM

TTT

GSXMEN · 10-25-2004, 04:02 PM

Need to drum up some cash this week!!

I may have someone locally interested, but I thought I'd offer it back up for sale here.....hopefully, for the last time.

Price down to $800 or $750 w/o cam. Thanks

grayw0lf · 10-25-2004, 08:06 PM

Man, if I were only closer! A nice 400sbc around here for under $1000 is a STEAL!

GSXMEN · 10-25-2004, 11:16 PM

I got a quote to Montgomery from Freightquote.com.....charges would be in the $169 range.

Let me know if that's something you'd be interested in.

adman123 · 10-26-2004, 11:01 AM

If you are near Buffalo you can call this place smaller ltl shipper. Mardon 800 627 3664 ask for Mary

Plain 72 · 10-26-2004, 06:04 PM

I am basically a novice at this, but am I right in thinking basic engine minus heads, intake, and all other accessories? I may be interested.

GSXMEN · 10-26-2004, 08:48 PM

*Block w/cam bearings, freeze plugs & oil gallery plugs installed.
*400 crank
*Resized rods
*TRW forged .030" over pistons
*Rod & Main bearings
*Rings
*New Crower hyd. cam(if you need it)
*Fuel pump rod & fp plate
*Oil filter adapter
*Stock oil pan & timing cover
*Front & rear main seals

Any other questions, let me know. Don't mean to rush you, but I need to sell this asap (next few days). Those darn bills.....you know how it gets.

Where are you located?

GSXMEN · 12-04-2004, 11:44 PM

Still available guys.

Price is $750 minus cam. I'll even kick in $50 towards shipping.

Thanks

chevman-67 · 12-05-2004, 01:09 PM

do you have any pics and does it have the timing chain,oil pump,
gasket set ,ect.and what year is the block.

GSXMEN · 12-06-2004, 02:14 AM

I'll try to get some pics this week and also check the date code (I forgot what year that one was).

I still have a stock pump, although, I'd recommend a new one. I may still have a timing set available. I'll also look thru the stash for gaskets. I'm pretty sure I don't have any 400" head gaskets left.

Thanks

GSXMEN · 12-07-2004, 11:05 PM

Date code is L 30 8 .....that should translate to Nov. 30th 1978.

I'll do my best to get some pics posted in the next couple of days.

02-17-2004, 12:55 PM	#26
GSXMEN Registered User Join Date: Aug 2002 Location: Upstate, NY Posts: 337	Still in need of a buyer. Thanks. __________________ Scott

02-17-2004, 04:14 PM	#27
FirstGen Just Don't Stop! Join Date: Feb 2004 Location: Dallas Posts: 1,239	I have about 700 bucks for you! haha Good Luck on a sale!!! __________________ 1968 C10 build in process TT LSA/6L90e/9"

02-18-2004, 01:44 PM	#28
GSXMEN Registered User Join Date: Aug 2002 Location: Upstate, NY Posts: 337	Thanks!! I can't believe it's been so difficult to sell good parts?? Had alot of interest....but, nobody has closed the deal - yet. __________________ Scott

02-18-2004, 04:39 PM	#29
FirstGen Just Don't Stop! Join Date: Feb 2004 Location: Dallas Posts: 1,239	I think shipping kills alot of the deal bummer! __________________ 1968 C10 build in process TT LSA/6L90e/9"

02-19-2004, 02:12 AM	#30
GSXMEN Registered User Join Date: Aug 2002 Location: Upstate, NY Posts: 337	I hear ya on that one!! I've checked shipping to OH, FL, & CA.....prices have varied from $110-$220. __________________ Scott

02-22-2004, 01:21 AM	#31
GSXMEN Registered User Join Date: Aug 2002 Location: Upstate, NY Posts: 337	TTT __________________ Scott

02-27-2004, 10:45 PM	#32
GSXMEN Registered User Join Date: Aug 2002 Location: Upstate, NY Posts: 337	Back up top. A buyer is out there somewhere!! __________________ Scott

03-14-2004, 04:20 AM	#33
GSXMEN Registered User Join Date: Aug 2002 Location: Upstate, NY Posts: 337	Let's try this again. __________________ Scott

03-14-2004, 04:28 AM	#34
FirstGen Just Don't Stop! Join Date: Feb 2004 Location: Dallas Posts: 1,239	I replied to your other post in the engine section... __________________ 1968 C10 build in process TT LSA/6L90e/9"

03-25-2004, 02:45 AM	#35
GSXMEN Registered User Join Date: Aug 2002 Location: Upstate, NY Posts: 337	TTT __________________ Scott

10-25-2004, 04:02 PM	#36
GSXMEN Registered User Join Date: Aug 2002 Location: Upstate, NY Posts: 337	Need to drum up some cash this week!! I may have someone locally interested, but I thought I'd offer it back up for sale here.....hopefully, for the last time. Price down to $800 or $750 w/o cam. Thanks __________________ Scott

10-25-2004, 08:06 PM	#37
grayw0lf Registered User Join Date: Apr 2004 Location: Clanton, AL Posts: 1,253	Man, if I were only closer! A nice 400sbc around here for under $1000 is a STEAL! __________________ 85' CUCV M1009!!! The newest addition! 6.2diesel, Th400, NP208, & only 36k miles! 70' C-10 LWB Fleetside - Looking good these days! 05' Dodge Neon 88' Winner Escape Sport 1750 - 4.3v6 94' Seadoo SP 84' Honda TRX200, bare nekkid. Just a frame & tires. Always looking for another project or any good deal!

10-25-2004, 11:16 PM	#38
GSXMEN Registered User Join Date: Aug 2002 Location: Upstate, NY Posts: 337	I got a quote to Montgomery from Freightquote.com.....charges would be in the $169 range. Let me know if that's something you'd be interested in. __________________ Scott

10-26-2004, 11:01 AM	#39
adman123 Registered User Join Date: Oct 2004 Location: TAMPA FL Posts: 12	If you are near Buffalo you can call this place smaller ltl shipper. Mardon 800 627 3664 ask for Mary

10-26-2004, 06:04 PM	#40
Plain 72 Registered User Join Date: May 2002 Posts: 18	I am basically a novice at this, but am I right in thinking basic engine minus heads, intake, and all other accessories? I may be interested. __________________ 1972 1/2 ton 4x4 1995 S-10 (Gas Saver) 1998 Caravan (Wife's)



Register or Log In To remove these advertisements.

10-26-2004, 08:48 PM	#41
GSXMEN Registered User Join Date: Aug 2002 Location: Upstate, NY Posts: 337	Block w/cam bearings, freeze plugs & oil gallery plugs installed. 400 crank Resized rods TRW forged .030" over pistons Rod & Main bearings Rings New Crower hyd. cam(if you need it) Fuel pump rod & fp plate Oil filter adapter Stock oil pan & timing cover *Front & rear main seals Any other questions, let me know. Don't mean to rush you, but I need to sell this asap (next few days). Those darn bills.....you know how it gets. Where are you located? __________________ Scott

12-04-2004, 11:44 PM	#42
GSXMEN Registered User Join Date: Aug 2002 Location: Upstate, NY Posts: 337	Still available guys. Price is $750 minus cam. I'll even kick in $50 towards shipping. Thanks __________________ Scott

12-05-2004, 01:09 PM	#43
chevman-67 Registered User Join Date: Jul 2004 Location: quebec canada Posts: 135	do you have any pics and does it have the timing chain,oil pump, gasket set ,ect.and what year is the block. __________________ gm's are #1 1967 chevrolet short step 1988 chev 4x4 1/2 ton 1989 gmc 1/2 ton 1991 chev 1/2 ton 4x4 1993 Jeep grand cherokee 4x4 And yes a 94 Ford Mustang.

12-06-2004, 02:14 AM	#44
GSXMEN Registered User Join Date: Aug 2002 Location: Upstate, NY Posts: 337	I'll try to get some pics this week and also check the date code (I forgot what year that one was). I still have a stock pump, although, I'd recommend a new one. I may still have a timing set available. I'll also look thru the stash for gaskets. I'm pretty sure I don't have any 400" head gaskets left. Thanks __________________ Scott

12-07-2004, 11:05 PM	#45
GSXMEN Registered User Join Date: Aug 2002 Location: Upstate, NY Posts: 337	Date code is L 30 8 .....that should translate to Nov. 30th 1978. I'll do my best to get some pics posted in the next couple of days. __________________ Scott

Register or Log In To remove these advertisements.