Cab to fender sheild - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Big Blue · 10-07-2015, 10:13 PM

Where can one get this shield? It will be going on a 87 cab. Thanks,John

" IF ANYONE HAS ANY PLEASE PM (PRIVATE MESSAGE) ME "

79sierra · 10-08-2015, 12:19 PM

You won't! Unless you find used ones that are better than yours. I looked for three years (on and off) until it was time to paint then I moved on without them.

tucsonjwt · 10-08-2015, 02:12 PM

Junkyards will have them. Southwest junkyards will have them rust free.

83GMCK2500 · 10-08-2015, 04:23 PM

If I remember correctly, those are a Silverado/Sierra Classic only item, part of the increased noise dampening standard on the higher trim levels, same package as hood insulation. Just an fyi if you go looking at a junkyard.

Big Blue · 10-08-2015, 05:03 PM

Thanks Everyone. The cab in the picture is not mine. As you can see in my signature I am doing a ground up project. Since I have everything apart I thought in would be good the add then to my build. I found a set in a junk yard but did not have time to remove them, now no one can go out into the yard,they pull it. So if any one has a set,send me a message.

John

**1774btcrew** · 10-08-2015, 11:40 PM

Quote:

Originally Posted by Big Blue

Thanks Everyone. The cab in the picture is not mine. As you can see in my signature I am doing a ground up project. Since I have everything apart I thought in would be good the add then to my build. I found a set in a junk yard but did not have time to remove them, now no one can go out into the yard,they pull it. So if any one has a set,send me a message.

John

I have a set off an 80 if they are all the same. Send me a PM if interested

Big Blue · 10-09-2015, 06:30 PM

PM Sent

Big Blue · 10-12-2015, 07:07 AM

Good Morning 1774btcrew, I sent you a PM about the cab to fender shield. Do you have any? Thanks, John

Big Blue · 10-14-2015, 07:20 AM

1774btcrew, Email sent

Hammered 77 · 10-16-2015, 01:42 PM

ttt

**1774btcrew** · 10-16-2015, 02:12 PM

John, these are yours if you want them but I am out of town until Wednesday. I will touch base with you then

Big Blue · 10-16-2015, 02:27 PM

Thanks, when you get back give me the details. Have a safe trip.

John

HipToBeSquared · 10-18-2015, 06:11 PM

The 78 Silverado I used to own had those on them. I was always worried they would be just a breeding ground for rust. Did they do any good and did they rot cabs?

Big Blue · 10-18-2015, 09:02 PM

I understand that this item was hard to find. So I do not think that many people had them. From the ones that I did see, I did not see any rust build up. I had a pair way back when, when I junked the truck I did not take them. Thanks for responding. John

**1774btcrew** · 10-18-2015, 11:23 PM

The pair I have came off a rusty suburban from Michigan there were no rust issues from where these were mounted

Big Blue · 10-26-2015, 05:41 PM

177BTCREW, I am still interested in the seal. I PM you. Give me a shout back so We can get things rolling. Thanks Again, John

**1774btcrew** · 10-26-2015, 09:55 PM

Just PM me with your email address again if you haven't already done so and we will go from there

Chevy1966 · 10-26-2015, 10:00 PM

I've been looking for a nice set of these "gaskets", or whatever you call them, for a long time. Very hard to find I guess. However they are a closed-cell foam so they are not going to retain a lot of moisture. They will collect lot's of dirt and other garbage. I really wonder what happened to all of the original tooling for some of these special parts? --Rob

**1774btcrew** · 10-26-2015, 11:30 PM

I actually had 2 sets of these at one point but don't know where the second set went.

motornut · 10-27-2015, 10:02 AM

My 87 burb rusted out in those spots,all kinds of crud behind those seals

Big Blue · 10-28-2015, 03:37 PM

1774btcrew, sent you a pm

10-07-2015, 10:13 PM	#1
Big Blue Registered User Join Date: Feb 2005 Location: Northeast--Bethlehem, Pennslyvania Posts: 642	Cab to fender sheild Where can one get this shield? It will be going on a 87 cab. Thanks,John " IF ANYONE HAS ANY PLEASE PM (PRIVATE MESSAGE) ME " Attached Images __________________ Big Blue ( John ) 79 Chevy Pick up.....My Dailey STILL Working on a frame up: 1987 Truck body on a 78 Blazer frame. Need cab blasted to start project. Got the cab BLASTED, Now Prep and Paint. Started to lay SOME BONDO and primer. Done, Ordering paint. Got paint, Stuff painted,Cab,Fenders, Hood more later. 9/7/2015 Got the clear coat on,now time to take one off. Started to put things back (What a nightmare) like the heating and AC stuff,inside wire harness, outside AC unit and booster, still more. May 2016, still working on the inside. Got duck work in,heating and AC. Radio (stock) in dash with after market in console later, Speaker are hooked up, Steering column is in. Getting ready to drop the cab onto the frame, Working on engine now since I have the room. Well here it is 2018, got the engine in and it runs, now I need to get the exhaust system in so I can adjust the lifters, to loud right now. Got the exhaust on now I am waiting for the break parts to come in. Last edited by Big Blue; 10-13-2015 at 05:47 PM.

10-08-2015, 12:19 PM	#2
79sierra Registered User Join Date: May 2015 Location: Parma, Ohio Posts: 35	Re: Cab to fender sheild You won't! Unless you find used ones that are better than yours. I looked for three years (on and off) until it was time to paint then I moved on without them.

10-08-2015, 02:12 PM	#3
tucsonjwt Registered User Join Date: Jul 2007 Location: Tucson, AZ Posts: 3,189	Re: Cab to fender sheild Junkyards will have them. Southwest junkyards will have them rust free.

10-08-2015, 04:23 PM	#4
83GMCK2500 Registered User Join Date: Sep 2009 Location: Beaverton, OR from WA State Posts: 1,515	Re: Cab to fender sheild If I remember correctly, those are a Silverado/Sierra Classic only item, part of the increased noise dampening standard on the higher trim levels, same package as hood insulation. Just an fyi if you go looking at a junkyard. __________________ Devin 1983 GMC High Sierra 2500, 4x4, RC/LB, 400 S.B., SM-465, NP-208, Corporate 10 bolt & 9.5" 14 bolt 1996 GMC Sierra SLE 3500 DRW, 4x4, EC/LB, Vortec 454, NV-4500, BW-4401, AAM 925 & AAM 1050 1997 GMC Sierra SLT 1500 4x4, Z71/F44, EC/SB, Vortec 350 My Introduction with my '83s History New Daily, the '96

10-08-2015, 05:03 PM	#5
Big Blue Registered User Join Date: Feb 2005 Location: Northeast--Bethlehem, Pennslyvania Posts: 642	Re: Cab to fender sheild Thanks Everyone. The cab in the picture is not mine. As you can see in my signature I am doing a ground up project. Since I have everything apart I thought in would be good the add then to my build. I found a set in a junk yard but did not have time to remove them, now no one can go out into the yard,they pull it. So if any one has a set,send me a message. John __________________ Big Blue ( John ) 79 Chevy Pick up.....My Dailey STILL Working on a frame up: 1987 Truck body on a 78 Blazer frame. Need cab blasted to start project. Got the cab BLASTED, Now Prep and Paint. Started to lay SOME BONDO and primer. Done, Ordering paint. Got paint, Stuff painted,Cab,Fenders, Hood more later. 9/7/2015 Got the clear coat on,now time to take one off. Started to put things back (What a nightmare) like the heating and AC stuff,inside wire harness, outside AC unit and booster, still more. May 2016, still working on the inside. Got duck work in,heating and AC. Radio (stock) in dash with after market in console later, Speaker are hooked up, Steering column is in. Getting ready to drop the cab onto the frame, Working on engine now since I have the room. Well here it is 2018, got the engine in and it runs, now I need to get the exhaust system in so I can adjust the lifters, to loud right now. Got the exhaust on now I am waiting for the break parts to come in.

10-09-2015, 06:30 PM	#7
Big Blue Registered User Join Date: Feb 2005 Location: Northeast--Bethlehem, Pennslyvania Posts: 642	Re: Cab to fender sheild PM Sent __________________ Big Blue ( John ) 79 Chevy Pick up.....My Dailey STILL Working on a frame up: 1987 Truck body on a 78 Blazer frame. Need cab blasted to start project. Got the cab BLASTED, Now Prep and Paint. Started to lay SOME BONDO and primer. Done, Ordering paint. Got paint, Stuff painted,Cab,Fenders, Hood more later. 9/7/2015 Got the clear coat on,now time to take one off. Started to put things back (What a nightmare) like the heating and AC stuff,inside wire harness, outside AC unit and booster, still more. May 2016, still working on the inside. Got duck work in,heating and AC. Radio (stock) in dash with after market in console later, Speaker are hooked up, Steering column is in. Getting ready to drop the cab onto the frame, Working on engine now since I have the room. Well here it is 2018, got the engine in and it runs, now I need to get the exhaust system in so I can adjust the lifters, to loud right now. Got the exhaust on now I am waiting for the break parts to come in.

10-12-2015, 07:07 AM	#8
Big Blue Registered User Join Date: Feb 2005 Location: Northeast--Bethlehem, Pennslyvania Posts: 642	Re: Cab to fender sheild Good Morning 1774btcrew, I sent you a PM about the cab to fender shield. Do you have any? Thanks, John __________________ Big Blue ( John ) 79 Chevy Pick up.....My Dailey STILL Working on a frame up: 1987 Truck body on a 78 Blazer frame. Need cab blasted to start project. Got the cab BLASTED, Now Prep and Paint. Started to lay SOME BONDO and primer. Done, Ordering paint. Got paint, Stuff painted,Cab,Fenders, Hood more later. 9/7/2015 Got the clear coat on,now time to take one off. Started to put things back (What a nightmare) like the heating and AC stuff,inside wire harness, outside AC unit and booster, still more. May 2016, still working on the inside. Got duck work in,heating and AC. Radio (stock) in dash with after market in console later, Speaker are hooked up, Steering column is in. Getting ready to drop the cab onto the frame, Working on engine now since I have the room. Well here it is 2018, got the engine in and it runs, now I need to get the exhaust system in so I can adjust the lifters, to loud right now. Got the exhaust on now I am waiting for the break parts to come in.

10-14-2015, 07:20 AM	#9
Big Blue Registered User Join Date: Feb 2005 Location: Northeast--Bethlehem, Pennslyvania Posts: 642	Re: Cab to fender sheild 1774btcrew, Email sent __________________ Big Blue ( John ) 79 Chevy Pick up.....My Dailey STILL Working on a frame up: 1987 Truck body on a 78 Blazer frame. Need cab blasted to start project. Got the cab BLASTED, Now Prep and Paint. Started to lay SOME BONDO and primer. Done, Ordering paint. Got paint, Stuff painted,Cab,Fenders, Hood more later. 9/7/2015 Got the clear coat on,now time to take one off. Started to put things back (What a nightmare) like the heating and AC stuff,inside wire harness, outside AC unit and booster, still more. May 2016, still working on the inside. Got duck work in,heating and AC. Radio (stock) in dash with after market in console later, Speaker are hooked up, Steering column is in. Getting ready to drop the cab onto the frame, Working on engine now since I have the room. Well here it is 2018, got the engine in and it runs, now I need to get the exhaust system in so I can adjust the lifters, to loud right now. Got the exhaust on now I am waiting for the break parts to come in.

10-16-2015, 01:42 PM	#10
Hammered 77 Registered User Join Date: Dec 2012 Location: Pendleton, Indiana Posts: 235	Re: Cab to fender sheild ttt

10-16-2015, 02:12 PM	#11
1774btcrew Senior Member Join Date: Jun 2009 Location: Phoenix AZ Posts: 4,603	Re: Cab to fender sheild John, these are yours if you want them but I am out of town until Wednesday. I will touch base with you then __________________ AZPartsLocators on Instagram 1972 Cheyenne Super Short Bed big block "Blackie" 1977 Crew Cab GMC Short bed with 4BT Intercooled Cummins Diesel and a 4L80e "The Junkyard Dog" 1985 Crew Cab Chevy dually with 5.9 Cummins "The Big Dog" This is what my dad liked to be called by the grandkids before he passed so it seems fitting for his old truck.

10-16-2015, 02:27 PM	#12
Big Blue Registered User Join Date: Feb 2005 Location: Northeast--Bethlehem, Pennslyvania Posts: 642	Re: Cab to fender sheild Thanks, when you get back give me the details. Have a safe trip. John __________________ Big Blue ( John ) 79 Chevy Pick up.....My Dailey STILL Working on a frame up: 1987 Truck body on a 78 Blazer frame. Need cab blasted to start project. Got the cab BLASTED, Now Prep and Paint. Started to lay SOME BONDO and primer. Done, Ordering paint. Got paint, Stuff painted,Cab,Fenders, Hood more later. 9/7/2015 Got the clear coat on,now time to take one off. Started to put things back (What a nightmare) like the heating and AC stuff,inside wire harness, outside AC unit and booster, still more. May 2016, still working on the inside. Got duck work in,heating and AC. Radio (stock) in dash with after market in console later, Speaker are hooked up, Steering column is in. Getting ready to drop the cab onto the frame, Working on engine now since I have the room. Well here it is 2018, got the engine in and it runs, now I need to get the exhaust system in so I can adjust the lifters, to loud right now. Got the exhaust on now I am waiting for the break parts to come in.

10-18-2015, 06:11 PM	#13
HipToBeSquared Registered User Join Date: Apr 2014 Location: Illinois Posts: 63	Re: Cab to fender sheild The 78 Silverado I used to own had those on them. I was always worried they would be just a breeding ground for rust. Did they do any good and did they rot cabs?

10-18-2015, 09:02 PM	#14
Big Blue Registered User Join Date: Feb 2005 Location: Northeast--Bethlehem, Pennslyvania Posts: 642	Re: Cab to fender sheild I understand that this item was hard to find. So I do not think that many people had them. From the ones that I did see, I did not see any rust build up. I had a pair way back when, when I junked the truck I did not take them. Thanks for responding. John __________________ Big Blue ( John ) 79 Chevy Pick up.....My Dailey STILL Working on a frame up: 1987 Truck body on a 78 Blazer frame. Need cab blasted to start project. Got the cab BLASTED, Now Prep and Paint. Started to lay SOME BONDO and primer. Done, Ordering paint. Got paint, Stuff painted,Cab,Fenders, Hood more later. 9/7/2015 Got the clear coat on,now time to take one off. Started to put things back (What a nightmare) like the heating and AC stuff,inside wire harness, outside AC unit and booster, still more. May 2016, still working on the inside. Got duck work in,heating and AC. Radio (stock) in dash with after market in console later, Speaker are hooked up, Steering column is in. Getting ready to drop the cab onto the frame, Working on engine now since I have the room. Well here it is 2018, got the engine in and it runs, now I need to get the exhaust system in so I can adjust the lifters, to loud right now. Got the exhaust on now I am waiting for the break parts to come in.

10-18-2015, 11:23 PM	#15
1774btcrew Senior Member Join Date: Jun 2009 Location: Phoenix AZ Posts: 4,603	Re: Cab to fender sheild The pair I have came off a rusty suburban from Michigan there were no rust issues from where these were mounted __________________ AZPartsLocators on Instagram 1972 Cheyenne Super Short Bed big block "Blackie" 1977 Crew Cab GMC Short bed with 4BT Intercooled Cummins Diesel and a 4L80e "The Junkyard Dog" 1985 Crew Cab Chevy dually with 5.9 Cummins "The Big Dog" This is what my dad liked to be called by the grandkids before he passed so it seems fitting for his old truck.

10-26-2015, 05:41 PM	#16
Big Blue Registered User Join Date: Feb 2005 Location: Northeast--Bethlehem, Pennslyvania Posts: 642	Re: Cab to fender sheild 177BTCREW, I am still interested in the seal. I PM you. Give me a shout back so We can get things rolling. Thanks Again, John __________________ Big Blue ( John ) 79 Chevy Pick up.....My Dailey STILL Working on a frame up: 1987 Truck body on a 78 Blazer frame. Need cab blasted to start project. Got the cab BLASTED, Now Prep and Paint. Started to lay SOME BONDO and primer. Done, Ordering paint. Got paint, Stuff painted,Cab,Fenders, Hood more later. 9/7/2015 Got the clear coat on,now time to take one off. Started to put things back (What a nightmare) like the heating and AC stuff,inside wire harness, outside AC unit and booster, still more. May 2016, still working on the inside. Got duck work in,heating and AC. Radio (stock) in dash with after market in console later, Speaker are hooked up, Steering column is in. Getting ready to drop the cab onto the frame, Working on engine now since I have the room. Well here it is 2018, got the engine in and it runs, now I need to get the exhaust system in so I can adjust the lifters, to loud right now. Got the exhaust on now I am waiting for the break parts to come in.



Register or Log In To remove these advertisements.

10-26-2015, 09:55 PM	#17
1774btcrew Senior Member Join Date: Jun 2009 Location: Phoenix AZ Posts: 4,603	Re: Cab to fender sheild Just PM me with your email address again if you haven't already done so and we will go from there __________________ AZPartsLocators on Instagram 1972 Cheyenne Super Short Bed big block "Blackie" 1977 Crew Cab GMC Short bed with 4BT Intercooled Cummins Diesel and a 4L80e "The Junkyard Dog" 1985 Crew Cab Chevy dually with 5.9 Cummins "The Big Dog" This is what my dad liked to be called by the grandkids before he passed so it seems fitting for his old truck.

10-26-2015, 10:00 PM	#18
Chevy1966 Registered User Join Date: Nov 2011 Location: San Luis Obispo, CA Posts: 198	Re: Cab to fender sheild I've been looking for a nice set of these "gaskets", or whatever you call them, for a long time. Very hard to find I guess. However they are a closed-cell foam so they are not going to retain a lot of moisture. They will collect lot's of dirt and other garbage. I really wonder what happened to all of the original tooling for some of these special parts? --Rob __________________ 66 Custom Camper 327 AC PS PB 66 C20 292 76 C25 Sierra Classic 76 C25 Sierra Grande 76 Camper Special 77 Sierra Grande 02 Suburban - the DD

10-26-2015, 11:30 PM	#19
1774btcrew Senior Member Join Date: Jun 2009 Location: Phoenix AZ Posts: 4,603	Re: Cab to fender sheild I actually had 2 sets of these at one point but don't know where the second set went. __________________ AZPartsLocators on Instagram 1972 Cheyenne Super Short Bed big block "Blackie" 1977 Crew Cab GMC Short bed with 4BT Intercooled Cummins Diesel and a 4L80e "The Junkyard Dog" 1985 Crew Cab Chevy dually with 5.9 Cummins "The Big Dog" This is what my dad liked to be called by the grandkids before he passed so it seems fitting for his old truck.

10-27-2015, 10:02 AM	#20
motornut 78K & 79C Jimmys Join Date: Nov 2009 Location: Ottawa Ont CANADA Posts: 7,901	Re: Cab to fender sheild My 87 burb rusted out in those spots,all kinds of crud behind those seals __________________ John 1978 GMCJimmy4X4-350/203 1979 GMCJimmy4X2-305/350

10-28-2015, 03:37 PM	#21
Big Blue Registered User Join Date: Feb 2005 Location: Northeast--Bethlehem, Pennslyvania Posts: 642	Re: Cab to fender sheild 1774btcrew, sent you a pm __________________ Big Blue ( John ) 79 Chevy Pick up.....My Dailey STILL Working on a frame up: 1987 Truck body on a 78 Blazer frame. Need cab blasted to start project. Got the cab BLASTED, Now Prep and Paint. Started to lay SOME BONDO and primer. Done, Ordering paint. Got paint, Stuff painted,Cab,Fenders, Hood more later. 9/7/2015 Got the clear coat on,now time to take one off. Started to put things back (What a nightmare) like the heating and AC stuff,inside wire harness, outside AC unit and booster, still more. May 2016, still working on the inside. Got duck work in,heating and AC. Radio (stock) in dash with after market in console later, Speaker are hooked up, Steering column is in. Getting ready to drop the cab onto the frame, Working on engine now since I have the room. Well here it is 2018, got the engine in and it runs, now I need to get the exhaust system in so I can adjust the lifters, to loud right now. Got the exhaust on now I am waiting for the break parts to come in.

Register or Log In To remove these advertisements.