12-15-2015, 11:36 AM | #476 |
Registered User
Join Date: Aug 2013
Location: San Jose Ca
Posts: 965
|
Re: 72 K30 Build
For a daily driver I would say away from a locker or posy up front. My friend Pat had Detroit locker in the rear and posy in front in a 1972 K20 and it was slide ways in the iced up roads in the winter.
|
12-15-2015, 02:58 PM | #477 |
Simple? What's simple?
Join Date: Apr 2007
Location: Southeast CT
Posts: 1,472
|
Re: 72 K30 Build
I've actually had this problem in a truck with an open front and locked rear - most people I know who drive in snow and ice prefer posi in the rear for that reason.
__________________
CURRENT '50 GMC 100 shortbed Gen IV 4.8 LS - 4L65E (Secret truck, Shhh!!!) Build '63 Buick Wildcat Coupe 401ci Nailhead (Very much in pieces) Photos '66 Impala SS convertible 327-QJet-glide (4 speed swap one of these days...) Photos '69 CST/10 4x4 SWB Stepper 350 2bbl - NV4500/NP241C (Broken Truck!) '72 Sierra Grande 2WD LWB fleetside 350-TH350 Refresh '99 K2500 Silverado RCLB 5.7 Vortec - NV4500/NP241C (Daily) '99 K2500 Suburban 7.4 Vortec - NV4500/NP246 (still working out the bugs) SOLD '71 Custom/10 2WD LWB fleetside - '72 GMC K/3500 Dually (Sold to redryder) |
12-16-2015, 10:56 AM | #478 | |
Registered User
Join Date: May 2011
Location: Syracuse, Utah
Posts: 1,986
|
Re: 72 K30 Build
Quote:
The front gear set seemed noticeably looser than the rear.
__________________
Brett 67 Camaro SS: 67 Camaro Build 72 Cheyenne/C10 Super 115" Fleetside: 72 C10 Build 72 Cheyenne/K30 Super 133" Longhorn DRW: 72 K30 Build SOLD YouTube: https://www.youtube.com/@6dee7-7dee2 |
|
12-21-2015, 12:26 PM | #479 |
Registered User
Join Date: May 2011
Location: Syracuse, Utah
Posts: 1,986
|
Re: 72 K30 Build
First wave of axle stuff has shown up and the shock mounts are ready to be welded on. Found way too much travel in the rear springs, if we leave them like that it would possibly over extend our new shocks and could possibly bend or break the top leafs. We are going to have to limit the travel some.
__________________
Brett 67 Camaro SS: 67 Camaro Build 72 Cheyenne/C10 Super 115" Fleetside: 72 C10 Build 72 Cheyenne/K30 Super 133" Longhorn DRW: 72 K30 Build SOLD YouTube: https://www.youtube.com/@6dee7-7dee2 |
12-21-2015, 01:28 PM | #480 |
Registered User
Join Date: Dec 2012
Location: Los Banos CA
Posts: 2,705
|
Re: 72 K30 Build
Merry Christmas too you!!!
Looking good! I like the stage when you have parts coming in!!! Paying part or working to pay for them stage not so much!!!
__________________
1956 Chevy Bel Air 2 door 1956 Chevy 210 4 Door 1970 K20 LWB project the Hulk build w/Supercharged 4.8L-ly2/4L60E HULK BUILD 1970 C10 Yellow/White Deluxe LWB w/ 5.3L-LC9/6L80E 1968 K10 LWB Dark green my son calls it "THE HULK Jr"HULK JR *SOLD* GO GO!!! |
12-22-2015, 12:22 PM | #481 |
Registered User
Join Date: May 2011
Location: Syracuse, Utah
Posts: 1,986
|
Re: 72 K30 Build
Merry Christmas to you and your family as well! Thanks my favorite part also, new parts are just the best!
Shock mounts are welded up and on there to stay moved inboard just a hair from the last set.
__________________
Brett 67 Camaro SS: 67 Camaro Build 72 Cheyenne/C10 Super 115" Fleetside: 72 C10 Build 72 Cheyenne/K30 Super 133" Longhorn DRW: 72 K30 Build SOLD YouTube: https://www.youtube.com/@6dee7-7dee2 |
12-23-2015, 11:31 AM | #482 |
Registered User
Join Date: May 2011
Location: Syracuse, Utah
Posts: 1,986
|
Re: 72 K30 Build
Getting stuff broke down.
__________________
Brett 67 Camaro SS: 67 Camaro Build 72 Cheyenne/C10 Super 115" Fleetside: 72 C10 Build 72 Cheyenne/K30 Super 133" Longhorn DRW: 72 K30 Build SOLD YouTube: https://www.youtube.com/@6dee7-7dee2 |
12-23-2015, 11:48 AM | #483 |
Senior Member
Join Date: Jul 2009
Location: Tomball, Texas
Posts: 1,592
|
Re: 72 K30 Build
You'll have a roller before you know it Brett. Looking good!
__________________
Rick 78 GMC K15 SWB, 350/NV4500/NP205/4.10s Project Hazel 71 GMC C25 350/TH400 - Project Angie 59 Chevy SWB Stepside (next in line? Not sure now ) 2001 GMC Sierra K2500 |
12-24-2015, 11:05 AM | #484 |
Registered User
Join Date: May 2011
Location: Syracuse, Utah
Posts: 1,986
|
Re: 72 K30 Build
We got our 72 C30 RV T400 and the TC back from the transmission shop. We added a Trans Go shift improver kit with a low stall converter. The transfer case didn’t need anything and just ended up being a reseal. Both were run in on their trans dyno so they both should be good to go.
__________________
Brett 67 Camaro SS: 67 Camaro Build 72 Cheyenne/C10 Super 115" Fleetside: 72 C10 Build 72 Cheyenne/K30 Super 133" Longhorn DRW: 72 K30 Build SOLD YouTube: https://www.youtube.com/@6dee7-7dee2 |
12-24-2015, 01:01 PM | #485 |
Registered User
Join Date: Dec 2012
Location: Los Banos CA
Posts: 2,705
|
Re: 72 K30 Build
Looking good. For me this was the fun part. This metal work (on the body) is ok but not my cup of tea!
keep it up!! Merry Christmas!
__________________
1956 Chevy Bel Air 2 door 1956 Chevy 210 4 Door 1970 K20 LWB project the Hulk build w/Supercharged 4.8L-ly2/4L60E HULK BUILD 1970 C10 Yellow/White Deluxe LWB w/ 5.3L-LC9/6L80E 1968 K10 LWB Dark green my son calls it "THE HULK Jr"HULK JR *SOLD* GO GO!!! |
12-29-2015, 11:31 AM | #486 |
Registered User
Join Date: May 2011
Location: Syracuse, Utah
Posts: 1,986
|
Re: 72 K30 Build
We got a set of rims back from powder coat they have a little bit of metallic in the powder called silver sparkle , made this set of old rims we had look pretty good.
__________________
Brett 67 Camaro SS: 67 Camaro Build 72 Cheyenne/C10 Super 115" Fleetside: 72 C10 Build 72 Cheyenne/K30 Super 133" Longhorn DRW: 72 K30 Build SOLD YouTube: https://www.youtube.com/@6dee7-7dee2 |
12-29-2015, 12:33 PM | #487 | |
Registered User
Join Date: Jan 2015
Location: Junction City OR
Posts: 1,758
|
Re: 72 K30 Build
Quote:
Hope you all had a good Christmas there. Project is looking real good. The rims look real nice. Almost like a factory argent silver. You will be rolling soon. Happy New Year, Thomas |
|
12-30-2015, 11:42 AM | #488 | ||
Registered User
Join Date: May 2011
Location: Syracuse, Utah
Posts: 1,986
|
Re: 72 K30 Build
Quote:
Quote:
Hey Thomas, you have a good eye my friend we have used this powder before because it is so close to argent silver. A second wave of axle parts has arrived and we just about have everything for reassembly, those carriers are like mechanical porn!
__________________
Brett 67 Camaro SS: 67 Camaro Build 72 Cheyenne/C10 Super 115" Fleetside: 72 C10 Build 72 Cheyenne/K30 Super 133" Longhorn DRW: 72 K30 Build SOLD YouTube: https://www.youtube.com/@6dee7-7dee2 |
||
12-30-2015, 11:57 AM | #489 |
Registered User
Join Date: Dec 2012
Location: Los Banos CA
Posts: 2,705
|
Re: 72 K30 Build
Ho Ho Ho!! Merry Christmas to you!!!
Funny how the older you get the fetish changes!!! lol! Happy New Year!!! Scott
__________________
1956 Chevy Bel Air 2 door 1956 Chevy 210 4 Door 1970 K20 LWB project the Hulk build w/Supercharged 4.8L-ly2/4L60E HULK BUILD 1970 C10 Yellow/White Deluxe LWB w/ 5.3L-LC9/6L80E 1968 K10 LWB Dark green my son calls it "THE HULK Jr"HULK JR *SOLD* GO GO!!! |
12-30-2015, 10:30 PM | #490 |
6>8 Plugless........
Join Date: Sep 2007
Location: Prairie City, Ia
Posts: 17,142
|
Re: 72 K30 Build
Very nice parts and the wheels look great! Have a happy new year too!
__________________
Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project Tired of spark plugs? Check this out. |
01-04-2016, 12:57 PM | #491 | ||
Registered User
Join Date: May 2011
Location: Syracuse, Utah
Posts: 1,986
|
Re: 72 K30 Build
Quote:
Quote:
Hope you both had a great holiday! Another round of cleaning up the 14 bolt this one should be ready to start reassemble soon. During the teardown we did find some more issues; need to replace all the inner and outer wheel bearings/races in both axles as we found problems with about half of them. Here is the upper kingpin on the RH side looks OK, LH side appears to have backed off a bit, not so good.
__________________
Brett 67 Camaro SS: 67 Camaro Build 72 Cheyenne/C10 Super 115" Fleetside: 72 C10 Build 72 Cheyenne/K30 Super 133" Longhorn DRW: 72 K30 Build SOLD YouTube: https://www.youtube.com/@6dee7-7dee2 |
||
01-04-2016, 03:50 PM | #492 |
Registered User
Join Date: Dec 2011
Location: pittstown nj
Posts: 103
|
Re: 72 K30 Build
Man just went through the whole build. Looking great!!
|
01-04-2016, 05:24 PM | #493 |
Registered User
Join Date: Aug 2013
Location: San Jose Ca
Posts: 965
|
Re: 72 K30 Build
I have never seen king pin upper bushing up like that. I have tried to replace them couple time and not able to remove the old ones. even with a 600 ft lb wrench ended up twisting the adapter that goes in the bushing.
|
01-04-2016, 05:44 PM | #494 |
Simple? What's simple?
Join Date: Apr 2007
Location: Southeast CT
Posts: 1,472
|
Re: 72 K30 Build
I concur - I replaced mine, but it took every bit of the 1200ft-lbs my impact has to offer to get them loose. Seems odd that it would be up. Also looks kind of canted to me?
__________________
CURRENT '50 GMC 100 shortbed Gen IV 4.8 LS - 4L65E (Secret truck, Shhh!!!) Build '63 Buick Wildcat Coupe 401ci Nailhead (Very much in pieces) Photos '66 Impala SS convertible 327-QJet-glide (4 speed swap one of these days...) Photos '69 CST/10 4x4 SWB Stepper 350 2bbl - NV4500/NP241C (Broken Truck!) '72 Sierra Grande 2WD LWB fleetside 350-TH350 Refresh '99 K2500 Silverado RCLB 5.7 Vortec - NV4500/NP241C (Daily) '99 K2500 Suburban 7.4 Vortec - NV4500/NP246 (still working out the bugs) SOLD '71 Custom/10 2WD LWB fleetside - '72 GMC K/3500 Dually (Sold to redryder) |
01-05-2016, 11:28 AM | #495 | ||
Registered User
Join Date: May 2011
Location: Syracuse, Utah
Posts: 1,986
|
Re: 72 K30 Build
Thanks hillbilly_deluxe I appreciate that!
Quote:
Quote:
Cone came right out with a big pipe wrench it has taken out about 2/3rd’s of the threads, not so good. After a little internet research I found the most common repair for this problem seems to be: A. Find another housing B. Replace the inner C’s C. Weld a new kingpin cone in place from below, if that fails see options A & B
__________________
Brett 67 Camaro SS: 67 Camaro Build 72 Cheyenne/C10 Super 115" Fleetside: 72 C10 Build 72 Cheyenne/K30 Super 133" Longhorn DRW: 72 K30 Build SOLD YouTube: https://www.youtube.com/@6dee7-7dee2 |
||
01-05-2016, 12:41 PM | #496 | |
Simple? What's simple?
Join Date: Apr 2007
Location: Southeast CT
Posts: 1,472
|
Re: 72 K30 Build
Quote:
__________________
CURRENT '50 GMC 100 shortbed Gen IV 4.8 LS - 4L65E (Secret truck, Shhh!!!) Build '63 Buick Wildcat Coupe 401ci Nailhead (Very much in pieces) Photos '66 Impala SS convertible 327-QJet-glide (4 speed swap one of these days...) Photos '69 CST/10 4x4 SWB Stepper 350 2bbl - NV4500/NP241C (Broken Truck!) '72 Sierra Grande 2WD LWB fleetside 350-TH350 Refresh '99 K2500 Silverado RCLB 5.7 Vortec - NV4500/NP241C (Daily) '99 K2500 Suburban 7.4 Vortec - NV4500/NP246 (still working out the bugs) SOLD '71 Custom/10 2WD LWB fleetside - '72 GMC K/3500 Dually (Sold to redryder) |
|
01-06-2016, 11:37 AM | #497 |
Registered User
Join Date: May 2011
Location: Syracuse, Utah
Posts: 1,986
|
Re: 72 K30 Build
I think your right Jim and called around to some of the axle experts and a recommended machine shop in my area and they were really not much help, except for one place Boyce Equipment in Ogden, UT. Took the housing there for a look and they did agree to install new kingpin kits including the upper cones and weld up this problem side. Going to have to wait a few weeks as the main axle builder is out and backed up from the holidays.
The wait is probably for the best as I’m not 100% that I’m going forward with this housing, crap!
__________________
Brett 67 Camaro SS: 67 Camaro Build 72 Cheyenne/C10 Super 115" Fleetside: 72 C10 Build 72 Cheyenne/K30 Super 133" Longhorn DRW: 72 K30 Build SOLD YouTube: https://www.youtube.com/@6dee7-7dee2 |
01-06-2016, 12:57 PM | #498 |
Simple? What's simple?
Join Date: Apr 2007
Location: Southeast CT
Posts: 1,472
|
Re: 72 K30 Build
Changes in the build, or just worried about that housing in particular?? Inquiring minds wish to know!
__________________
CURRENT '50 GMC 100 shortbed Gen IV 4.8 LS - 4L65E (Secret truck, Shhh!!!) Build '63 Buick Wildcat Coupe 401ci Nailhead (Very much in pieces) Photos '66 Impala SS convertible 327-QJet-glide (4 speed swap one of these days...) Photos '69 CST/10 4x4 SWB Stepper 350 2bbl - NV4500/NP241C (Broken Truck!) '72 Sierra Grande 2WD LWB fleetside 350-TH350 Refresh '99 K2500 Silverado RCLB 5.7 Vortec - NV4500/NP241C (Daily) '99 K2500 Suburban 7.4 Vortec - NV4500/NP246 (still working out the bugs) SOLD '71 Custom/10 2WD LWB fleetside - '72 GMC K/3500 Dually (Sold to redryder) |
01-07-2016, 11:46 AM | #499 |
Registered User
Join Date: May 2011
Location: Syracuse, Utah
Posts: 1,986
|
Re: 72 K30 Build
No change of direction, I’m just concerned about this frontend housing. If I can’t source a reasonably priced replacement we’ll move forward with the repair. So in the mean time I cleaned up the knuckles and we took them over to Boyce, if we move forward with the repair they wanted to install the knuckles I guess to make sure all is well.
Here’s an update on our 14b, it has started to go back together. The hubs and pinion housing have the new races all installed. Sanded the hub seal area of the housing and then knocked the speedi-sleeves on both sides with a thin film of red Loctite.
__________________
Brett 67 Camaro SS: 67 Camaro Build 72 Cheyenne/C10 Super 115" Fleetside: 72 C10 Build 72 Cheyenne/K30 Super 133" Longhorn DRW: 72 K30 Build SOLD YouTube: https://www.youtube.com/@6dee7-7dee2 |
01-11-2016, 11:19 AM | #500 |
Registered User
Join Date: May 2011
Location: Syracuse, Utah
Posts: 1,986
|
Re: 72 K30 Build
Last thing was to knock the new straddle bearing in place. Here’s a shot of the factory pattern and how ours ended up.
__________________
Brett 67 Camaro SS: 67 Camaro Build 72 Cheyenne/C10 Super 115" Fleetside: 72 C10 Build 72 Cheyenne/K30 Super 133" Longhorn DRW: 72 K30 Build SOLD YouTube: https://www.youtube.com/@6dee7-7dee2 |
Bookmarks |
Tags |
72chevy, dually, flatbed, k30, motorhome |
|
|