Power steering pump fitting - The 1947 - Present Chevrolet & GMC Truck Message Board Network

clemsonteg · 01-21-2016, 06:34 PM

I read that I can use the sae fitting on the back of an older pump on the LS pump to adapt my lines to the LS pump. Can this fitting be purchased somewhere? I'm not having a ton of luck finding it and I no longer have my old ps pump.

clemsonteg · 01-21-2016, 08:51 PM

Found this http://www.speedwaymotors.com/O-Ring...ter,24682.html might be what I'm looking for if I can't find the fitting from an older pump

Dustytrix · 01-21-2016, 11:08 PM

Following.

**truckdude239** · 01-22-2016, 08:01 AM

I went and got mine from the junkyard they chargerd me like a bux for it

BilletSpeed · 01-22-2016, 01:58 PM

Subscribed. With my engine location, I just tweaked the return hose (the one made into pump tank) slightly to clear frame rail. I'm curious to see what others have done for the pressure line.

crazy longhorn · 01-23-2016, 08:42 PM

I have an 84 Burb box on my 69 (o ring fittings)....the hose screwed right into the LS pump. Yes, I did have to tweek the return line , as above mentioned, just a bit, to clear the frame rail. if you find the early flare fit nut, it will screw right into the LS pump

......longhorn

Andy4639 · 01-24-2016, 12:22 PM

Yes the fitting will screw right in. Mine did anyway!

http://67-72chevytrucks.com/vboard/s...d.php?t=627585

Link for new SS hoses.

http://67-72chevytrucks.com/vboard/s...hp?t=545846You

mattcrp1 · 01-24-2016, 12:24 PM

I used an old 70's pump fitting on my 2002 4.8l truck p/s pump. I had a hard time finding one as well.

clemsonteg · 01-24-2016, 12:26 PM

Quote:

Originally Posted by mattcrp1

I used an old 70's pump fitting on my 2002 4.8l truck p/s pump. I had a hard time finding one as well.

Did you find a new one somewhere or just get a new one from a salvage yard?

engairuph · 01-24-2016, 01:25 PM

I used the fitting out a 75 chevy pump and put in my Ls pump. Andy4639 is the Upstate Gm truck club accepting new Members? Nothing on there site to join and I'm in Greenville for awhile.

clemsonteg · 01-24-2016, 01:43 PM

Quote:

Originally Posted by engairuph

I used the fitting out a 75 chevy pump and put in my Ls pump. Andy4639 is the Upstate Gm truck club accepting new Members? Nothing on there site to join and I'm in Greenville for awhile.

Always accepting new members. Check out the FB page. That's where most of the activity is https://m.facebook.com/groups/517668...?ref=bookmarks

68basket · 01-24-2016, 07:18 PM

Quote:

Originally Posted by clemsonteg

Found this http://www.speedwaymotors.com/O-Ring...ter,24682.html might be what I'm looking for if I can't find the fitting from an older pump

that should work

1bad396ss · 01-25-2016, 11:58 PM

I used the Speedway adapter linked in the previous thread and a set of stock style lines for a 72 with small block. Screwed right into the LS pump and sealed fine with the O-ring to flare adapter.

Andy4639 · 01-26-2016, 08:03 AM

Quote:

Originally Posted by engairuph

I used the fitting out a 75 chevy pump and put in my Ls pump. Andy4639 is the Upstate Gm truck club accepting new Members? Nothing on there site to join and I'm in Greenville for awhile.

Member ship is free just need to contact Matt are one of the others to get you on it. It's open to all people as long as you like and promote the GM brand of trucks!
Get in touch with Matt he is on here also.
Username
MattPSU

Andy4639 · 01-26-2016, 08:09 AM

Quote:

Originally Posted by clemsonteg

Did you find a new one somewhere or just get a new one from a salvage yard?

Here is a link for some gm fittings.

https://www.google.com/#q=power+stee...valve&tbm=shop

clemsonteg · 01-26-2016, 10:34 AM

Quote:

Originally Posted by Andy4639

Here is a link for some gm fittings.

https://www.google.com/#q=power+stee...valve&tbm=shop

Thanks Andy. I found several of the flow reducing valves for rack and pinion setups, but I haven't seen anything in stock form. I wasn't sure if the reduction from 3 to 2 gpm would be a problem on a factory gearbox.

01-21-2016, 06:34 PM	#1
clemsonteg Registered User Join Date: Jul 2012 Location: Anderson,SC Posts: 953	Power steering pump fitting I read that I can use the sae fitting on the back of an older pump on the LS pump to adapt my lines to the LS pump. Can this fitting be purchased somewhere? I'm not having a ton of luck finding it and I no longer have my old ps pump.

01-21-2016, 08:51 PM	#2
clemsonteg Registered User Join Date: Jul 2012 Location: Anderson,SC Posts: 953	Re: Power steering pump fitting Found this http://www.speedwaymotors.com/O-Ring...ter,24682.html might be what I'm looking for if I can't find the fitting from an older pump

01-21-2016, 11:08 PM	#3
Dustytrix Registered User Join Date: Jan 2012 Location: Petal,Ms. Posts: 428	Re: Power steering pump fitting Following.

01-22-2016, 08:01 AM	#4
truckdude239 Senior Member Join Date: Sep 2005 Location: Lewisville, Nc Posts: 10,237	Re: Power steering pump fitting I went and got mine from the junkyard they chargerd me like a bux for it __________________ David fuller Ase Certified Mechanic Click here to help support our board!! 1971 Chevy c-10 under going a 4.8l LSx swap Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=421305 2007 Honda Accord my daily 145kmiles 2002 Honda Accord 4 door With 330k(sisters car) 2005 toyota Avalon 228k( brothers car) 2002 Sububran 5.3 245k 2000 Tahoe 5.3l 378 General manager for Marco's Carwash & lube

01-22-2016, 01:58 PM	#5
BilletSpeed Registered User Join Date: Jan 2016 Location: NC Posts: 2	Re: Power steering pump fitting Subscribed. With my engine location, I just tweaked the return hose (the one made into pump tank) slightly to clear frame rail. I'm curious to see what others have done for the pressure line.

01-23-2016, 08:42 PM	#6
crazy longhorn Fabricate till you "puke" Join Date: Jun 2002 Location: Ill Posts: 9,402	Re: Power steering pump fitting I have an 84 Burb box on my 69 (o ring fittings)....the hose screwed right into the LS pump. Yes, I did have to tweek the return line , as above mentioned, just a bit, to clear the frame rail. if you find the early flare fit nut, it will screw right into the LS pump ......longhorn __________________ 69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears....

01-24-2016, 12:22 PM	#7
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: Power steering pump fitting Yes the fitting will screw right in. Mine did anyway! http://67-72chevytrucks.com/vboard/s...d.php?t=627585 Link for new SS hoses. http://67-72chevytrucks.com/vboard/s...hp?t=545846You __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

01-24-2016, 12:24 PM	#8
mattcrp1 Registered User Join Date: May 2010 Location: Mountain House, CA Posts: 555	Re: Power steering pump fitting I used an old 70's pump fitting on my 2002 4.8l truck p/s pump. I had a hard time finding one as well. __________________ My Chevy habit is paid for by Ford diesels... Here is my SLOW LS install: http://67-72chevytrucks.com/vboard/s...55#post6456355 Caliper Rebuild: http://67-72chevytrucks.com/vboard/s...d.php?t=613748 Upper Control Arm Bushings: http://67-72chevytrucks.com/vboard/s...d.php?t=616974 IG mattcrp1

01-24-2016, 01:25 PM	#10
engairuph Registered User Join Date: Oct 2014 Location: D'Iberville, MS Posts: 447	Re: Power steering pump fitting I used the fitting out a 75 chevy pump and put in my Ls pump. Andy4639 is the Upstate Gm truck club accepting new Members? Nothing on there site to join and I'm in Greenville for awhile. __________________ Ralph L. Jasper 69 4x4 Suburban PTO winch(NAVY) 13 GMC Ext cab 12 Ford Fusion SE(wife) MAI Interior shop

01-25-2016, 11:58 PM	#13
1bad396ss Registered User Join Date: Jul 2012 Location: STL MO Posts: 85	Re: Power steering pump fitting I used the Speedway adapter linked in the previous thread and a set of stock style lines for a 72 with small block. Screwed right into the LS pump and sealed fine with the O-ring to flare adapter.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.