AD window winder mechanism - The 1947 - Present Chevrolet & GMC Truck Message Board Network

yoshi · 01-22-2016, 03:06 PM

I've managed to get hold of the new part that the handle fixes to. I'm not sure what it's called. It's held in place by 3 or 4 rivets that I can drill out. Fitting that e new one with the rivets provided what's the best way/tools to use to squash the rivets? Thanks

yoshi · 01-26-2016, 06:20 PM

Sorted this out today, as no ones done it I've taken some photos

yoshi · 01-26-2016, 06:22 PM

I drilled out the old rivets

yoshi · 01-26-2016, 06:24 PM

Removing Spring

yoshi · 01-26-2016, 06:26 PM

Putting new one in

yoshi · 01-26-2016, 06:27 PM

Putting the spring back in was the hardest part

sqweaka · 01-26-2016, 06:28 PM

hi mate didnt see this post, ive done the same on the drivers side mechanism
did you buy a new shaft?

ah i see you have added a few more pics since i posted

yoshi · 01-26-2016, 06:35 PM

I was given the gold part in the middle

sqweaka · 01-26-2016, 06:40 PM

given.. lucky.. i used one from a later single arm, the gearing was slightly out, but it seems to work, althouh i dont have the glass fitted yet
the two guides/rollers that run in the channel! do you have a picture, i think the ends of mine have something missing

yoshi · 01-26-2016, 06:51 PM

Can do tomorrow

sqweaka · 01-26-2016, 06:53 PM

im not sure if they should look like this or not?

http://www.ebay.co.uk/itm/1406209567...%3AMEBIDX%3AIT

MARTINSR · 01-26-2016, 10:42 PM

Awesome thread Yoshi.

Brian

jackson · 01-27-2016, 11:03 AM

Quote:

Originally Posted by sqweaka

im not sure if they should look like this or not?

http://www.ebay.co.uk/itm/1406209567...%3AMEBIDX%3AIT

I used those on my 49. worked great

sqweaka · 01-27-2016, 04:21 PM

Quote:

Originally Posted by jackson

I used those on my 49. worked great

could you explain how they fitted please!

yoshi · 01-27-2016, 04:46 PM

Yeah looks like it's right. Tried to refit the whole mechanism into the door today, I wedged the glass in the fully up position when I removed it so left it in that position. I've got everything in place except I can only get one of the three bolts in place on the middle section. Any tips for refitting these? Thanks

yoshi · 01-28-2016, 12:53 PM

Sorted it out using a mirror & torch, the lower runner wasn't the n the track. All sorted now. Anyone know where to get the new part that I fitted & what its called? Thanks

sqweaka · 01-28-2016, 03:09 PM

thanks yoshi, looks like the plastic bits missing of mine, ill have to see if any of the uk dealers stock them

nice work on the install

yoshi · 01-28-2016, 07:25 PM

Cheers, this is what I think it is but no picture http://www.oldchevytrucks.com/cart/p...1&i=10939|||||

01-22-2016, 03:06 PM	#1
yoshi Registered User Join Date: Oct 2014 Location: uk Posts: 621	AD window winder mechanism I've managed to get hold of the new part that the handle fixes to. I'm not sure what it's called. It's held in place by 3 or 4 rivets that I can drill out. Fitting that e new one with the rivets provided what's the best way/tools to use to squash the rivets? Thanks __________________ yoshi's 49 project

01-26-2016, 06:20 PM	#2
yoshi Registered User Join Date: Oct 2014 Location: uk Posts: 621	Re: AD window winder mechanism Sorted this out today, as no ones done it I've taken some photos Attached Images __________________ yoshi's 49 project

01-26-2016, 06:22 PM	#3
yoshi Registered User Join Date: Oct 2014 Location: uk Posts: 621	Re: AD window winder mechanism I drilled out the old rivets Attached Images __________________ yoshi's 49 project

01-26-2016, 06:24 PM	#4
yoshi Registered User Join Date: Oct 2014 Location: uk Posts: 621	Re: AD window winder mechanism Removing Spring Attached Images __________________ yoshi's 49 project

01-26-2016, 06:26 PM	#5
yoshi Registered User Join Date: Oct 2014 Location: uk Posts: 621	Re: AD window winder mechanism Putting new one in Attached Images __________________ yoshi's 49 project

01-26-2016, 06:27 PM	#6
yoshi Registered User Join Date: Oct 2014 Location: uk Posts: 621	Re: AD window winder mechanism Putting the spring back in was the hardest part Attached Images __________________ yoshi's 49 project

01-26-2016, 06:28 PM	#7
sqweaka Registered User Join Date: Mar 2015 Location: Belford uk Posts: 120	Re: AD window winder mechanism hi mate didnt see this post, ive done the same on the drivers side mechanism did you buy a new shaft? ah i see you have added a few more pics since i posted

01-26-2016, 06:35 PM	#8
yoshi Registered User Join Date: Oct 2014 Location: uk Posts: 621	Re: AD window winder mechanism I was given the gold part in the middle __________________ yoshi's 49 project

01-26-2016, 06:40 PM	#9
sqweaka Registered User Join Date: Mar 2015 Location: Belford uk Posts: 120	Re: AD window winder mechanism given.. lucky.. i used one from a later single arm, the gearing was slightly out, but it seems to work, althouh i dont have the glass fitted yet the two guides/rollers that run in the channel! do you have a picture, i think the ends of mine have something missing

01-26-2016, 06:51 PM	#10
yoshi Registered User Join Date: Oct 2014 Location: uk Posts: 621	Re: AD window winder mechanism Can do tomorrow __________________ yoshi's 49 project

01-26-2016, 06:53 PM	#11
sqweaka Registered User Join Date: Mar 2015 Location: Belford uk Posts: 120	Re: AD window winder mechanism im not sure if they should look like this or not? http://www.ebay.co.uk/itm/1406209567...%3AMEBIDX%3AIT

01-26-2016, 10:42 PM	#12
MARTINSR Registered User Join Date: Dec 2000 Location: Boise, Idaho Posts: 6,003	Re: AD window winder mechanism Awesome thread Yoshi. Brian __________________ 1948 Chevy pickup Chopped, Sectioned, 1953 Corvette 235 powered. Once was even 401 Buick mid engined with the carburetor right between the seats! Bought with paper route money in 1973 when I was 15. "Fan of most anything that moves human beings"

01-27-2016, 04:46 PM	#15
yoshi Registered User Join Date: Oct 2014 Location: uk Posts: 621	Re: AD window winder mechanism Yeah looks like it's right. Tried to refit the whole mechanism into the door today, I wedged the glass in the fully up position when I removed it so left it in that position. I've got everything in place except I can only get one of the three bolts in place on the middle section. Any tips for refitting these? Thanks Attached Images __________________ yoshi's 49 project

01-28-2016, 12:53 PM	#16
yoshi Registered User Join Date: Oct 2014 Location: uk Posts: 621	Re: AD window winder mechanism Sorted it out using a mirror & torch, the lower runner wasn't the n the track. All sorted now. Anyone know where to get the new part that I fitted & what its called? Thanks __________________ yoshi's 49 project

01-28-2016, 03:09 PM	#17
sqweaka Registered User Join Date: Mar 2015 Location: Belford uk Posts: 120	Re: AD window winder mechanism thanks yoshi, looks like the plastic bits missing of mine, ill have to see if any of the uk dealers stock them nice work on the install



Register or Log In To remove these advertisements.

01-28-2016, 07:25 PM	#18
yoshi Registered User Join Date: Oct 2014 Location: uk Posts: 621	Re: AD window winder mechanism Cheers, this is what I think it is but no picture http://www.oldchevytrucks.com/cart/p...1&i=10939\|\|\|\|\| __________________ yoshi's 49 project

Register or Log In To remove these advertisements.