WTB: Pre -87 Fuel Injection Manifold - The 1947 - Present Chevrolet & GMC Truck Message Board Network

benscool1 · 02-29-2004, 08:47 PM

I need a manifold for a TBI that will fit a pre 87 engine w/out the center bolt heads. Anybody got one?

*1FaastC10* · 03-01-2004, 01:16 AM

no such thing exists. get a regular QJet intake (which you've probably already got), an adapter and TBI from a 454 truck, and put 350 injectors in it.

benscool1 · 03-01-2004, 12:35 PM

Actually, I don't need it. A neighbor of mine has an 84 GMC w/an Edelbrock carb and Weiand Intake and is looking to install a fuel injection system. I have an 87 350 w/all that stuff, but since the heads are different I don't think it will fit right? Anyway, he wants to trade me for it so I'd say its a pretty good deal.

bpmcgee · 03-01-2004, 12:59 PM

If you have center bolt heads, then the intakes are not interchangeable.

I don't know what sort of TBI he's planning on running, but Holley has an adapter plate that mates one of their 2-barrel TBIs to a standard quadrajet intake. If the bolt patterns are the same, it should work for a factory TBI too.

Brian

benscool1 · 03-01-2004, 06:51 PM

I know very well that the intakes are not interchangeable, thats the problem. He just wants to run a factory TBI, which is what I have. I'll tell him that and see what he thinks.

Thanks,
- Ben

*1FaastC10* · 03-01-2004, 07:55 PM

accidentally replied rather than PM...

69c10stepside · 03-01-2004, 10:14 PM

I have modified tbi intakes to work on older heads, you just have to be for sure to not drill too much, and use washers big enough to cover the area that was drilled out. No big deal, I have done it three times with out any problems.

benscool1 · 03-02-2004, 04:16 PM

OK thanks, I'll keep that in mind 69c10.

02-29-2004, 08:47 PM	#1
benscool1 Registered User Join Date: Mar 2003 Location: Williamsfield, IL Posts: 781	WTB: Pre -87 Fuel Injection Manifold I need a manifold for a TBI that will fit a pre 87 engine w/out the center bolt heads. Anybody got one? __________________ Ben 84 C10 Silverado 14 Silverado Z71

03-01-2004, 12:35 PM	#3
benscool1 Registered User Join Date: Mar 2003 Location: Williamsfield, IL Posts: 781	Actually, I don't need it. A neighbor of mine has an 84 GMC w/an Edelbrock carb and Weiand Intake and is looking to install a fuel injection system. I have an 87 350 w/all that stuff, but since the heads are different I don't think it will fit right? Anyway, he wants to trade me for it so I'd say its a pretty good deal. __________________ Ben 84 C10 Silverado 14 Silverado Z71

03-01-2004, 06:51 PM	#5
benscool1 Registered User Join Date: Mar 2003 Location: Williamsfield, IL Posts: 781	I know very well that the intakes are not interchangeable, thats the problem. He just wants to run a factory TBI, which is what I have. I'll tell him that and see what he thinks. Thanks, - Ben __________________ Ben 84 C10 Silverado 14 Silverado Z71

03-01-2004, 07:55 PM	#6
1FaastC10 Account Suspended Join Date: Oct 2002 Location: Elkhart, IN Posts: 6,399	accidentally replied rather than PM... Last edited by 1FaastC10; 03-01-2004 at 07:57 PM.

03-01-2004, 10:14 PM	#7
69c10stepside Large Member Join Date: Jun 2002 Location: Northwest Arkansas Posts: 747	I have modified tbi intakes to work on older heads, you just have to be for sure to not drill too much, and use washers big enough to cover the area that was drilled out. No big deal, I have done it three times with out any problems. __________________ 1989 GMC C1500 ECSB 1972 Gmc Jimmy 1972 Chevy C10 SWB Sold

03-01-2004, 01:16 AM	#2
1FaastC10 Account Suspended Join Date: Oct 2002 Location: Elkhart, IN Posts: 6,399	no such thing exists. get a regular QJet intake (which you've probably already got), an adapter and TBI from a 454 truck, and put 350 injectors in it.

03-01-2004, 12:59 PM	#4
bpmcgee Registered User Join Date: Mar 2003 Location: Northern Illinois Posts: 2,181	If you have center bolt heads, then the intakes are not interchangeable. I don't know what sort of TBI he's planning on running, but Holley has an adapter plate that mates one of their 2-barrel TBIs to a standard quadrajet intake. If the bolt patterns are the same, it should work for a factory TBI too. Brian

03-02-2004, 04:16 PM	#8
benscool1 Registered User Join Date: Mar 2003 Location: Williamsfield, IL Posts: 781	OK thanks, I'll keep that in mind 69c10. __________________ Ben 84 C10 Silverado 14 Silverado Z71



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.