|
01-28-2016, 07:10 PM
|
#1 |
|
Registered User
Join Date: Jan 2015
Location: Prairieville, LA
Posts: 129
|
4L60E Question
Doing a LS Swap on my 72 C10, bought a 2003 Chevy donor truck with 5.3 / 4L60E combo. Rebuilt the transmission and have it bolted up to the motor sitting in the frame. My buddie just called and said he has a tranny out of a 2011 Chevy with only 13,000 miles on it that he said I could have !
Question is ..... Are these two tranny's the same ? Are they interchangeable? I'd rather use the new one if it'll work. Im using the factory computer and harness for my swap Thanks for any advice in advance, Wade
__________________
2016 Silverado2005 GMC Sierra 2002 Chevy Slverado Extra Cab (youngest sons) 2009 GMC Denali (oldest sons) 2015 Lexus 250i (wifes) 1972 Chevy C10 LWB, 5.3 / 4L60e swap "COLOR OF MONEY" http://www.louisianaclassictruckclub.com |
|
|
|
01-28-2016, 08:54 PM
|
#2 |
|
Senior Member
Join Date: May 2009
Location: Fort Worth, TX
Posts: 6,370
|
Re: 4L60E Question
GM eliminated the 3-2 downshift solenoid, And the Pressure Switch Manifold in 2009.
The short answer is NO, It will not work with a 2003 PCM, But it's free & has a lot of good hard parts that will swap into your '03 4L60E if needed later.....You can always give it to me...... |
|
|
|
|
01-29-2016, 02:02 PM
|
#3 |
|
Registered User
Join Date: Jan 2015
Location: Prairieville, LA
Posts: 129
|
Re: 4L60E Question
Thanks for the info! I was hoping it would work, but like you say it was free ! I'll do something with it!
Thanks
__________________
2016 Silverado2005 GMC Sierra 2002 Chevy Slverado Extra Cab (youngest sons) 2009 GMC Denali (oldest sons) 2015 Lexus 250i (wifes) 1972 Chevy C10 LWB, 5.3 / 4L60e swap "COLOR OF MONEY" http://www.louisianaclassictruckclub.com |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
