Stepside fenders with tail lights - The 1947 - Present Chevrolet & GMC Truck Message Board Network

rsmarr1982 · 03-13-2016, 01:27 PM

I have a set of stepside fenders that have a indent and holes to have tail lights bolted on but all the lights I see are for the ones that bolt to a bracket at the rear of the bed. The holes appear to be factory . Any ideas?

**Classic v6 GMC's** · 03-13-2016, 01:31 PM

Quote:

Originally Posted by rsmarr1982

I have a set of stepside fenders that have a indent and holes to have tail lights bolted on but all the lights I see are for the ones that bolt to a bracket at the rear of the bed. The holes appear to be factory . Any ideas?

I think you are talking about the indent for back up lights on 1966 trucks.

rsmarr1982 · 03-13-2016, 01:45 PM

They might be it. If I buy the lights listed at lmc for 60-66 and just not use the Brackett should they bolt on the fendèr?

BR3W CITY · 03-13-2016, 02:21 PM

The holes are for the reverse lights. The tail lights still bolt to the cups/brackets on the tail.

I punched my old reverse spots out, and frenched the old light cup into its spot, so my tail lights do actually sit there.

03-13-2016, 01:27 PM	#1
rsmarr1982 Registered User Join Date: Jul 2010 Location: mogadore ohio Posts: 867	Stepside fenders with tail lights I have a set of stepside fenders that have a indent and holes to have tail lights bolted on but all the lights I see are for the ones that bolt to a bracket at the rear of the bed. The holes appear to be factory . Any ideas? __________________ 1969 chevy c10 lwb stepside 250 6 3 ott 1971 chevy c10 lwb 250 6 with power steering 3 ott 1972 chevy k20 4x4 350/TH350 automatic 1978 chevy Malibu 4dr 305 2bbl (all original) 1979 chevy k10 Scottsdale 350/th350 full-time 4wd(daily driver)

03-13-2016, 01:45 PM	#3
rsmarr1982 Registered User Join Date: Jul 2010 Location: mogadore ohio Posts: 867	Re: Stepside fenders with tail lights They might be it. If I buy the lights listed at lmc for 60-66 and just not use the Brackett should they bolt on the fendèr? Attached Images __________________ 1969 chevy c10 lwb stepside 250 6 3 ott 1971 chevy c10 lwb 250 6 with power steering 3 ott 1972 chevy k20 4x4 350/TH350 automatic 1978 chevy Malibu 4dr 305 2bbl (all original) 1979 chevy k10 Scottsdale 350/th350 full-time 4wd(daily driver)

03-13-2016, 02:21 PM	#4
BR3W CITY meowMEOWmeowMEOW Join Date: Sep 2009 Location: MKE WI Posts: 7,128	Re: Stepside fenders with tail lights The holes are for the reverse lights. The tail lights still bolt to the cups/brackets on the tail. I punched my old reverse spots out, and frenched the old light cup into its spot, so my tail lights do actually sit there. __________________ *'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING* MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.