PO has me PO'd - Page 107 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mtully79 · 03-18-2016, 01:32 PM

Quote:

Originally Posted by jaros44sr

Thanks Tully, you and me both learning, but it is fun buying new parts and making them work. This forum is great, never an unkind word
Hope you get that driveshaft worked out... since a shop did the lower, can you have them address it

My new thoughts are tending to the steering knuckle

Shop would need to keep it for a few days, and it would be stored outside. No top, and iffy weather nixing that for the time being. Hoping it turns out to be a simple part defect that is an easy(and less expensive) fix.

**jaros44sr** · 03-19-2016, 12:19 PM

[url=https://flic.kr/p/EvxWqY]MARYANN - WIN_20160319_120608[/

[url=https://flic.kr/p/EvxWrj]MARYANN - WIN_20160319_120542[/

Things were progressing nicely for Saturday morning, when disaster happened....

**jaros44sr** · 03-19-2016, 12:25 PM

SNAFU.... kinked the braided SS hose

[url=https://flic.kr/p/F1Utjd]WIN_20160319_120633[/

Luckily hydrotech supplies just enough extra hose and ferrules for a second attempt, I will be more careful this time

**Captainfab** · 03-19-2016, 11:20 PM

Thanks for the info. I would have thought that, that application would have originally came with an integral reservoir, not a remote reservoir.

Quote:

Originally Posted by jaros44sr

Sure captain, 1972 350 cu. in. GMC jimmy and pick up
NAPA's part #38-5141, I bought mine w/o tank, you can get either way. No pulley and no mount, but was an exact match to mine. My pulley had a key

If you get yours w/o tank, make sure you keep your mounting bolts for the tank, as it doesn't come with them, but does include the pressure port fitting

**jaros44sr** · 03-20-2016, 09:01 AM

Quote:

Originally Posted by Captainfab

Thanks for the info. I would have thought that, that application would have originally came with an integral reservoir, not a remote reservoir.

Yes are correct, the correct app. Would have had an integral reservoir. Mine has been moded

AJs72K5 · 03-20-2016, 02:18 PM

Most people don't realize how tedious all the plumbing and wiring work is. Keep it up.

**jaros44sr** · 03-22-2016, 01:51 PM

Thanks AJ for following along, you're rite about tedious. Set back with the kink kinda deflated my balloon.

Upstate NY right now, grandkids and an old wooden boat are taking up my time at the moment. My son has me working on the wiring harness, like I don't have enough of my own...

Didn't post up any picks of my fish this year

**jaros44sr** · 03-22-2016, 08:01 PM

Before I left, had a few moments to work on my low pressure return hose

**jaros44sr** · 03-26-2016, 01:02 PM

Changed up a little from hydrotech, bango runs a little tighter than the 90 degree bend, also swivel. part # from pure choice is 11810

Also, tank should be here in a week from Petersen

**jaros44sr** · 03-26-2016, 01:16 PM

Also started to work on my anti-freeze overflow tank, converted w/s washer tank, bracket bought from Roger Koop-aux. battery

[url=https://flic.kr/p/FgMvqS]

[/url

AJs72K5 · 03-26-2016, 08:45 PM

Quote:

Originally Posted by jaros44sr

Didn't post up any picks of my fish this year

What has this build come to?!

**jaros44sr** · 03-27-2016, 06:54 PM

Quote:

Originally Posted by AJs72K5

What has this build come to?!

Just trying to keep the masses happy

Happy Easter

72K5CSTDarkOlive · 03-28-2016, 08:57 PM

Nice work Jaro! too bad about kinking the stainless braided line. Those aren't cheap either. I'm looking forward to seeing the rest of install on the Hyrotech boost setup

**jaros44sr** · 03-29-2016, 08:04 AM

Quote:

Originally Posted by 72K5CSTDarkOlive

Nice work Jaro! too bad about kinking the stainless braided line. Those aren't cheap either. I'm looking forward to seeing the rest of install on the Hyrotech boost setup

Thanks, It's not so much cost, but waiting a week or so getting the parts back in to finish the job. Luckily, they sent enough hose for a screw up. With Easter dinner for family, and a funeral, I should be able to get back to work on it this week. Gotta call Petersen today to get an exact shipping date on the tank, so I can make a mount on the prop. Valve

Thanks for watching....

**jaros44sr** · 03-29-2016, 10:16 AM

Installed the last of the high pressure hoses, swivel makes it much easier as you don't have to worry about the orientation of the fitting when assembled. I highly recommend using them on any hose application. Also, I use grease on the threads of the fitting when I swage it up

[url=https://flic.kr/p/FDtqoJ]

[

**jaros44sr** · 03-29-2016, 10:18 AM

[url=https://flic.kr/p/FDtqpf]

**jaros44sr** · 03-31-2016, 12:56 PM

Tank came in from Petersen, have to build a plate to allow mounting using prop. Valve bolts

[url=https://

Also, picked up my electric exhaust cut outs for the Camaro

[url=https://flic.kr/p/FKmzzB]

**jaros44sr** · 04-01-2016, 09:51 AM

Mocked up my tank, 2 1/4" 6061 x1/2" will be in today from mc master Carr.

Now I can work on my return hoses and supply to pump

**jaros44sr** · 04-01-2016, 11:55 AM

Ordered aluminum 4 pm, on my doorstep 10am, nice pulls up tight against a square flat and the two bosses for the bolts. Just need to buy 1/4" longer bolts

**jaros44sr** · 04-23-2016, 11:18 AM

Dropped the radiator off at the welders shop, had to enlarge the outlet to 1 3/4", since that was the inlet size of my electric water pump. He also put a bead on the tube with his roller. Now, I can start working on the cooling system again

One more line to hook up on the hydro boost -10 return line, parts s/b here Monday

[url=https://flic.kr/p/FASaQ8]WIN_20160423_110154

[url=https://flic.kr/p/FASaQi]

**jaros44sr** · 04-27-2016, 07:04 AM

Finished up the last of the return hoses -10, after you install the crimping nut/collar in soft jaws in your vise, make sure your wrench doesn't extend below the nut you are tightening, it will gall the collar if you are not careful. But, you can touch up with a magic marker

If I didn't mention before, lubricate the threads, I would hate to gall the threads halfway up the crimp

This Russell pro classic II hose is much easier to use then braided stainless, b/c you can rotate fittings to get alignment after crimping is done

[url=https://flic.kr/p/GuSF7S]

[url=https://flic.kr/p/GuSN5E]

Ok, off to the next mod. Probably mounting computers in glovebox

**jaros44sr** · 04-30-2016, 05:12 PM

Had some time to source out some radiator hoses today, shop worker allowed me to check out his inventory. First pick was exactly right for my purpose, like was made for a 72 jimmy w/ an aluminum rad w/ a 1 3/4" outlet. Cut off about 5 inches from the 90 degree side and added a mandrel bent 45degree aluminum tubing, have to take the tubing back to my welder to have a bead put on it

[url=https://flic.kr/p/GGjc

tjsblazer · 04-30-2016, 07:51 PM

Jim. Good write up on your power steering plumbing for me. I too am going to run that Hydratech unit and a remote fluid reservoir.

**jaros44sr** · 04-30-2016, 08:23 PM

Quote:

Originally Posted by tjsblazer

Jim. Good write up on your power steering plumbing for me. I too am going to run that Hydratech unit and a remote fluid reservoir.

thank you, Jeff. Thing I found out was neither of the 2 factory braces line up. So, I don't know if vibration will be a problem. If you come up with a mod. lmk

Which m/c are you going to use? Remote tank is supposed to be no further away then 13" so keep that in mind
Also, tell Jim you want a banjo fitting instead of the supplied fitting that comes with the kit

Chad22873 · 05-29-2016, 01:36 AM

It's been a month Jim. What's new?

03-19-2016, 12:19 PM	#2652
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,763	Re: PO has me PO'd [url=https://flic.kr/p/EvxWqY]MARYANN - WIN_20160319_120608[/ [url=https://flic.kr/p/EvxWrj]MARYANN - WIN_20160319_120542[/ Things were progressing nicely for Saturday morning, when disaster happened.... __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

03-19-2016, 12:25 PM	#2653
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,763	Re: PO has me PO'd SNAFU.... kinked the braided SS hose [url=https://flic.kr/p/F1Utjd]WIN_20160319_120633[/ Luckily hydrotech supplies just enough extra hose and ferrules for a second attempt, I will be more careful this time __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

03-20-2016, 02:18 PM	#2656
AJs72K5 Registered User Join Date: Nov 2007 Location: South Tx Posts: 1,083	Re: PO has me PO'd Most people don't realize how tedious all the plumbing and wiring work is. Keep it up. __________________ - AJ Gray Matter Build - 1972 K5 with some stuff

03-22-2016, 01:51 PM	#2657
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,763	Re: PO has me PO'd Thanks AJ for following along, you're rite about tedious. Set back with the kink kinda deflated my balloon. Upstate NY right now, grandkids and an old wooden boat are taking up my time at the moment. My son has me working on the wiring harness, like I don't have enough of my own... Didn't post up any picks of my fish this year __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

03-22-2016, 08:01 PM	#2658
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,763	Re: PO has me PO'd Before I left, had a few moments to work on my low pressure return hose __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

03-26-2016, 01:02 PM	#2659
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,763	Re: PO has me PO'd Changed up a little from hydrotech, bango runs a little tighter than the 90 degree bend, also swivel. part # from pure choice is 11810 Also, tank should be here in a week from Petersen __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

03-26-2016, 01:16 PM	#2660
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,763	Re: PO has me PO'd Also started to work on my anti-freeze overflow tank, converted w/s washer tank, bracket bought from Roger Koop-aux. battery [url=https://flic.kr/p/FgMvqS][/url __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

03-28-2016, 08:57 PM	#2663
72K5CSTDarkOlive Registered User Join Date: Aug 2013 Location: Central Coast, CA Posts: 774	Re: PO has me PO'd Nice work Jaro! too bad about kinking the stainless braided line. Those aren't cheap either. I'm looking forward to seeing the rest of install on the Hyrotech boost setup __________________ My Build Thread 72 K5 http://67-72chevytrucks.com/vboard/s...d.php?t=628612 Build version 2.0: 72 K5 6.0 LQ9, 4L80e, NP205 http://67-72chevytrucks.com/vboard/s...d.php?t=793192 ____________________________________________ 1972 CST K5 Blazer Dark Olive

03-29-2016, 10:16 AM	#2665
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,763	Re: PO has me PO'd Installed the last of the high pressure hoses, swivel makes it much easier as you don't have to worry about the orientation of the fitting when assembled. I highly recommend using them on any hose application. Also, I use grease on the threads of the fitting when I swage it up [url=https://flic.kr/p/FDtqoJ][ __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim Last edited by jaros44sr; 03-29-2016 at 10:24 AM.

03-29-2016, 10:18 AM	#2666
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,763	Re: PO has me PO'd [url=https://flic.kr/p/FDtqpf] __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim Last edited by jaros44sr; 03-29-2016 at 10:25 AM.

03-31-2016, 12:56 PM	#2667
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,763	Re: PO has me PO'd Tank came in from Petersen, have to build a plate to allow mounting using prop. Valve bolts [url=https:// Also, picked up my electric exhaust cut outs for the Camaro [url=https://flic.kr/p/FKmzzB] __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim Last edited by jaros44sr; 03-31-2016 at 01:01 PM.

04-01-2016, 09:51 AM	#2668
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,763	Re: PO has me PO'd Mocked up my tank, 2 1/4" 6061 x1/2" will be in today from mc master Carr. Now I can work on my return hoses and supply to pump __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

04-01-2016, 11:55 AM	#2669
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,763	Re: PO has me PO'd Ordered aluminum 4 pm, on my doorstep 10am, nice pulls up tight against a square flat and the two bosses for the bolts. Just need to buy 1/4" longer bolts __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

04-23-2016, 11:18 AM	#2670
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,763	Re: PO has me PO'd Dropped the radiator off at the welders shop, had to enlarge the outlet to 1 3/4", since that was the inlet size of my electric water pump. He also put a bead on the tube with his roller. Now, I can start working on the cooling system again One more line to hook up on the hydro boost -10 return line, parts s/b here Monday [url=https://flic.kr/p/FASaQ8]WIN_20160423_110154 [url=https://flic.kr/p/FASaQi] __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

04-27-2016, 07:04 AM	#2671
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,763	Re: PO has me PO'd Finished up the last of the return hoses -10, after you install the crimping nut/collar in soft jaws in your vise, make sure your wrench doesn't extend below the nut you are tightening, it will gall the collar if you are not careful. But, you can touch up with a magic marker If I didn't mention before, lubricate the threads, I would hate to gall the threads halfway up the crimp This Russell pro classic II hose is much easier to use then braided stainless, b/c you can rotate fittings to get alignment after crimping is done [url=https://flic.kr/p/GuSF7S] [url=https://flic.kr/p/GuSN5E] Ok, off to the next mod. Probably mounting computers in glovebox __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim Last edited by jaros44sr; 04-27-2016 at 07:12 AM.



Register or Log In To remove these advertisements.

04-30-2016, 05:12 PM	#2672
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,763	Re: PO has me PO'd Had some time to source out some radiator hoses today, shop worker allowed me to check out his inventory. First pick was exactly right for my purpose, like was made for a 72 jimmy w/ an aluminum rad w/ a 1 3/4" outlet. Cut off about 5 inches from the 90 degree side and added a mandrel bent 45degree aluminum tubing, have to take the tubing back to my welder to have a bead put on it [url=https://flic.kr/p/GGjc __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

04-30-2016, 07:51 PM	#2673
tjsblazer Registered User Join Date: Oct 2009 Location: Great White North Posts: 1,520	Re: PO has me PO'd Jim. Good write up on your power steering plumbing for me. I too am going to run that Hydratech unit and a remote fluid reservoir. __________________ Jeff. '72 Blazer K5 "Camshaft opinions are like belly buttons; everyone has one and no two are alike" My Blazer Build: http://67-72chevytrucks.com/vboard/s...d.php?t=626752 My Engine Build: http://67-72chevytrucks.com/vboard/s...d.php?t=637336

05-29-2016, 01:36 AM	#2675
Chad22873 Registered User Join Date: Oct 2015 Location: Parsons, KS Posts: 160	Re: PO has me PO'd It's been a month Jim. What's new? __________________ BR549

Register or Log In To remove these advertisements.