Decoding a 1968 C10 12 bolt rear - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Jozai · 05-10-2016, 11:59 AM

Hey All:
I purchased a 12 bolt rear from a local u-pull-it salvage yard that I took from a 1968 C10. The stamping on the axle tube is HR 11 14 K and the mark on the outside of the gear housing is N. Can anyone tell me where I can look to decode these numbers?

thanks,
Joe

**aerotruk63** · 05-10-2016, 12:21 PM

HR ( 4.11 Ratio )

Jozai · 05-10-2016, 12:44 PM

Thanks aerotruck63. Very helpful info.
Joe

05-10-2016, 11:59 AM	#1
Jozai Registered User Join Date: May 2016 Location: Glen Rock, PA Posts: 7	Decoding a 1968 C10 12 bolt rear Hey All: I purchased a 12 bolt rear from a local u-pull-it salvage yard that I took from a 1968 C10. The stamping on the axle tube is HR 11 14 K and the mark on the outside of the gear housing is N. Can anyone tell me where I can look to decode these numbers? thanks, Joe

05-10-2016, 12:21 PM	#2
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,627	Re: Decoding a 1968 C10 12 bolt rear HR ( 4.11 Ratio ) __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1

05-10-2016, 12:44 PM	#3
Jozai Registered User Join Date: May 2016 Location: Glen Rock, PA Posts: 7	Re: Decoding a 1968 C10 12 bolt rear Thanks aerotruck63. Very helpful info. Joe



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.