1972 5x5 to 5x4.75 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bravo411 · 05-29-2016, 04:59 PM

I know this has been asked 1,000,000 times. I searched and searched and cant seem to find a answer. What rotor(if any) can I put on my 72 to make it 5x4.75? I want to put Billet Specialties and they don't make 5x5. Thank you for any help..

gringoloco · 05-29-2016, 06:13 PM

1) Redrill current rotors, or 2) Use 73-87 light duty (1" thick rotor) spindles with 88-92 Camaro 1LE rotors, or 3) you can upgrade to big brake kits like CPP or Kore that offer car bolt pattern. There is no bolt on rotor for your current setup with 5x4.75 bp.

**raggedjim** · 05-29-2016, 06:24 PM

Seems like I heard some of the G10 chevy vans will bolt on and are 5 x 4.75". I'll see if I can find any info.

Thread all about this: http://67-72chevytrucks.com/vboard/s...g10+van+rotors

Rg

bravo411 · 05-29-2016, 07:22 PM

Thanks guys, I'm gonna get them drilled till I save up for the Scott's IFS..

05-29-2016, 04:59 PM	#1
bravo411 Registered User Join Date: Sep 2015 Location: Odessa, Texas Posts: 6	1972 5x5 to 5x4.75 I know this has been asked 1,000,000 times. I searched and searched and cant seem to find a answer. What rotor(if any) can I put on my 72 to make it 5x4.75? I want to put Billet Specialties and they don't make 5x5. Thank you for any help..

05-29-2016, 06:13 PM	#2
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: 1972 5x5 to 5x4.75 1) Redrill current rotors, or 2) Use 73-87 light duty (1" thick rotor) spindles with 88-92 Camaro 1LE rotors, or 3) you can upgrade to big brake kits like CPP or Kore that offer car bolt pattern. There is no bolt on rotor for your current setup with 5x4.75 bp. __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

05-29-2016, 06:24 PM	#3
raggedjim Senior Member Join Date: Jun 2002 Location: Murray, Kentucky Posts: 3,485	Re: 1972 5x5 to 5x4.75 Seems like I heard some of the G10 chevy vans will bolt on and are 5 x 4.75". I'll see if I can find any info. Thread all about this: http://67-72chevytrucks.com/vboard/s...g10+van+rotors Rg __________________ Roger '68 Short step - https://67-72chevytrucks.com/vboard/...d.php?t=849675 '69 ('70?) 2wd Blazer '70 GMC Jimmy 2wd '73 Firebird - https://67-72chevytrucks.com/vboard/...d.php?t=853203 Ideas - https://67-72chevytrucks.com/vboard/...d.php?t=851743 Last edited by raggedjim; 05-29-2016 at 06:39 PM.

05-29-2016, 07:22 PM	#4
bravo411 Registered User Join Date: Sep 2015 Location: Odessa, Texas Posts: 6	Re: 1972 5x5 to 5x4.75 Thanks guys, I'm gonna get them drilled till I save up for the Scott's IFS..



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.