another rear blinker question

[jasnake65]

Trying to figure out whats wrong with my RH blinker. I cant get that side to work and its frustrating...Grr. I did buy a new turn signal switch, a new blinker fuse(the one that makes the noise..lol) pop in a new fuse. Almost seems its still not getting the power to the turn signal for RH. LH works, brakes works on both sides. Is there a way I can check to make sure its getting power? Anyone have a quick diagram of the wiring colors?

When your checking the blinker switch connection under the dash what should I look for? Want to make sure Im doing it right

[bosephus]

When this happened to me it was a ground issue. I ran an additional ground wire to the frame. Hope this helped!

[jasnake65]

Where abouts did you add? Be doing that tonight

[padresag]

if the brake light works then you have a ground as brake light and t/s are the same element. is the brake light bright whan it comes on. you have tailights both sides?
ron

[jasnake65]

No blinker on the RH side only, blinker on LH only, have brakes on both

[padresag]

Originally Posted by jasnake65

No blinker on the RH side only, blinker on LH only, have brakes on both

you have already said that.
ron

[jasnake65]

Just got home, tail lights on, blinker works, brakes work on LH, no RH blinker. I switched wires and can make the RH blinker work when I turn LH blinker. This makes believe no power getting to the actual switch. That point I am stump to what to look for

[jasnake65]

I did forget the steering column is a 63-66