Code po332

[aod92]

My truck has a po332 code which is for a knock sensor. My knock sensors are new and My motor has never gotten wet so I know that's not the problem. I do notice my truck makes a lot of lifter noise. Could that be causing a false reading? My truck also seems to be sluggish. Would this cause a low power problem? My truck just has a base tune in it and I'm bringing it to be tuned in the next couple of weeks. I want to get these bugs worked out before it hits the dyno

[BR3W CITY]

False? We don't know its false yet, you might actually have knock....

How bad is the lifter noise, and did you do heads/cam or something like that? If you have noisy lifters (beyond the normal "ls motors are noisy" level), then you probably have a mechanical problem. Ruling out a cause of knock while an actual defect exists won't get us anywhere.

[truckdude239]

I just went though thiz on my suburban . I replace my knock sensors when I did my intake gaskets using bwd sensors from Advance Auto Parts a new harness from Dorman. About 3,000 miles I have my check engine light come on for the p0332 knock sensor too low signal + short. I had to put my intake back off and I replace the knock sensors with the OEM Delphi and new harness harness. So far it has not come back I found out that the aftermarket knock sensors not that great

[aod92]

Brew city it does have a cam. Truck dude, those are the same knock sensors I used. Where do you buy the Delphi sensors...Dealer only?

[truckdude239]

No i ordered them from advance auto made them warranty them out it took them about a week to get them they where actlay cheaper then the bwds i bought the dephi number is AS10017 i paid 46 for them where are the advance brand was 56 each, i made them warranty the knocks sensors the harness and intake gaskets when i redid mine. but i also have a comerical account so they wanted to keep me happy, but it would not be unreasonable for a walk in customer to ask for all that to be warrantied out

[truckdude239]

https://www.amazon.com/Delphi-AS1001...n+knock+sensor

heres an even better deal

[aod92]

Originally Posted by truckdude239

https://www.amazon.com/Delphi-AS1001...n+knock+sensor

heres an even better deal

Awesome. Thanks man

[Hart_Rod]

Originally Posted by aod92

Brew city it does have a cam. Truck dude, those are the same knock sensors I used. Where do you buy the Delphi sensors...Dealer only?

You may need to adjust the Knock threshold in the tune do to the cam and headers...

[aod92]

Originally Posted by Hart_Rod

You may need to adjust the Knock threshold in the tune do to the cam and headers...

That's something my tuner can do correct?