292 exhaust manifold Help! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Bluegrain64 · 08-03-2016, 05:43 PM

Hello all, new to the forum and I have a question regarding my 64 c30.
I'm trying to locate a exhaust manifold for my 292 and have read mixed things on fitment.
I looked at one from summit but it says it will not fit a 64!?
I've located a used one from a 68 292 but am hesitant to get it without knowing it will fit for sure.
Common sense would tell me most inline 6s would interchange.
So I guess my question is: will any year 292 manifold work or is there something special with the 64?
Thanks!
Oh here's the truck I got it at a auction for 600 bucks!

scoot_mcgrute · 08-03-2016, 05:48 PM

For what it's worth, my 292 is a GM crate motor and I'm running my old 250 intake and exhaust manifolds on it. Everything bolted right up with no problems.

rudyyloverboiii · 08-03-2016, 08:37 PM

I have an extra one that will fit on the 292. Just pay for the shipping

TJ's Chevy · 08-03-2016, 08:55 PM

They are all the same until they went with the integrated heads.

Bluegrain64 · 08-03-2016, 09:49 PM

Quote:

Originally Posted by rudyyloverboiii

I have an extra one that will fit on the 292. Just pay for the shipping

That's a nice offer, I may take you up on that!

Quote:

Originally Posted by TJ's Chevy

They are all the same until they went with the integrated heads.

Ok good to know, so all 292's are interchangeable? Rumor has it 250's work as well, does that sound right?
Thanks guys.

chevy_mike · 08-03-2016, 09:57 PM

From everything I know, the standard head is basically the same, it's the block that is different for the 292 and the smaller CI engines.

TJ's Chevy · 08-03-2016, 11:35 PM

Quote:

Originally Posted by Bluegrain64

Ok good to know, so all 292's are interchangeable? Rumor has it 250's work as well, does that sound right?
Thanks guys.

All 292 parts are interchangeable between each other up until they used the integrated head and I believe water pumps differed through the years for them. 250's shared the same head and exhaust manifolds, but had a smaller intake like the 230. Heads are the same on the 230-250-292 and so are the bores, but the strokes are different. The 250 is a stroked 230 and the 292 is a taller block due to the rather long 4.125 inch stroke.

Wrenchbender Ret · 08-04-2016, 12:56 PM

The 292 engines in the med. duty trucks (1 1/2 ton up) had a larger ex. outlet & it pointed straight down. The 1 ton & smaller interchanged with the 250 ex. manifolds although there are some minor differences. Some where around 71 they switched to a 3 bolt flange. Either will work if you change the flange on the exhaust pipe. I always tried to use 250-230 manifolds if you use used ones. The ex. on 292 engines run very hot & generally are warped or cracked.

08-03-2016, 05:43 PM	#1
Bluegrain64 Registered User Join Date: Aug 2016 Location: Isanti,MN Posts: 34	292 exhaust manifold Help! Hello all, new to the forum and I have a question regarding my 64 c30. I'm trying to locate a exhaust manifold for my 292 and have read mixed things on fitment. I looked at one from summit but it says it will not fit a 64!? I've located a used one from a 68 292 but am hesitant to get it without knowing it will fit for sure. Common sense would tell me most inline 6s would interchange. So I guess my question is: will any year 292 manifold work or is there something special with the 64? Thanks! Oh here's the truck I got it at a auction for 600 bucks! Attached Images

08-03-2016, 05:48 PM	#2
scoot_mcgrute Registered User Join Date: Apr 2004 Location: Tigard, Or Posts: 503	Re: 292 exhaust manifold Help! For what it's worth, my 292 is a GM crate motor and I'm running my old 250 intake and exhaust manifolds on it. Everything bolted right up with no problems. __________________ 1966 Army Truck http://67-72chevytrucks.com/vboard/s...d.php?t=691778

08-03-2016, 08:37 PM	#3
rudyyloverboiii Registered User Join Date: Nov 2014 Location: IE California Posts: 225	Re: 292 exhaust manifold Help! I have an extra one that will fit on the 292. Just pay for the shipping

08-03-2016, 08:55 PM	#4
TJ's Chevy Registered User Join Date: Mar 2013 Location: Southern Oregon Posts: 10,384	Re: 292 exhaust manifold Help! They are all the same until they went with the integrated heads. __________________ 1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw

08-03-2016, 09:57 PM	#6
chevy_mike Never Ending Projects Join Date: Jul 2006 Location: San Diego, CA Posts: 3,836	Re: 292 exhaust manifold Help! From everything I know, the standard head is basically the same, it's the block that is different for the 292 and the smaller CI engines. __________________ . 1965 C10 Panel, Tiki Express http://www.67-72chevytrucks.com/vboa...d.php?t=506580 SOLD 1968 Chevy C10, Long, Fleetside, Hot Rod Hauler http://67-72chevytrucks.com/vboard/s...d.php?t=313233 SOLD 1965 Chevy C10, Long, Fleetside, Hot Rod C10 http://67-72chevytrucks.com/vboard/s...d.php?t=415702 SOLD We were given two ears and one mouth for a reason... listen twice as much and speak half as often...

08-04-2016, 12:56 PM	#8
Wrenchbender Ret Registered User Join Date: Oct 2005 Location: Overland Park, Ks. Posts: 5,229	Re: 292 exhaust manifold Help! The 292 engines in the med. duty trucks (1 1/2 ton up) had a larger ex. outlet & it pointed straight down. The 1 ton & smaller interchanged with the 250 ex. manifolds although there are some minor differences. Some where around 71 they switched to a 3 bolt flange. Either will work if you change the flange on the exhaust pipe. I always tried to use 250-230 manifolds if you use used ones. The ex. on 292 engines run very hot & generally are warped or cracked.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.