Fuel Line Questions - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Scott2 · 10-08-2016, 10:48 AM

On my '51 3100, I got the gas tank mounted (Tanks 53 CGX) using one of their Walbro in-tank pumps and started to run the fuel lines. I bought the Tanks LS fuel line kit which includes Russell rubber line and barbed fittings. These are the twist loc kind that they show easily push together? BS. I know I have less hand strength than I used to but it's not gone and these are a bear!

I started as they tell you to - oil the ends, clamp the fitting in the vise, twist the hose on - except - crap it won't go! So I tried sticking the hose in boiling water and that didn't help.

I found the Koul EZ-ON Hose Press http://koultools.com/product/push-lock-hose-tool/ which looks awesome but it's $250!

I'm sure I'd use it again but still - that's a bunch. Today I was searching here and found a link to the Summit braided fuel line kit for about $110. I'd have to figure out which snap on fittings to use to connect to my Corvette filter regulator but that should be cheaper than buying the Koul tool.

Any thoughts or advice on this? I'd be happy to use the Russell kit, just struggling with paying for the Koul tool for ~6 fittings and it really pisses me off that I can't get the hose on those friction fittings.

Thanks!

__________________

BR3W CITY · 10-08-2016, 07:50 PM

What I'm about to say might make people cringe, but hey, it works.

AstroGlide

**Advanced Design** · 10-08-2016, 08:29 PM

Here is a tool one of our members made for inserting the ends....https://youtu.be/xkUtVirwFHo

**Advanced Design** · 10-08-2016, 08:41 PM

Here is a simple tool a friend made for installing the Russell ends. It worked really well.

Scott2 · 10-09-2016, 11:08 AM

Doug,

Thanks! Those are a couple of good suggestions that give me some ideas.

Br3w,

Not sure what to do about yours. If I asked more I'm afraid the answer would involve a squirt of the lube and a hose and then... Interesting suggestion though!

BIGglaSS · 10-10-2016, 11:19 AM

Br3w, thanks for the reminder to schedule my annual physical this month.

BR3W CITY · 10-10-2016, 11:25 AM

Last time we built a multi-link suspension, there were so many poly bushings to install that we went through a full tube of the 'glide. I'm pretty sure the cashier at the store was curious why we stopped back in for 2 bottles in 2 days. Rough weekend.

10-08-2016, 10:48 AM	#1
Scott2 Registered User Join Date: Mar 2015 Location: Castle Rock, CO Posts: 534	Fuel Line Questions On my '51 3100, I got the gas tank mounted (Tanks 53 CGX) using one of their Walbro in-tank pumps and started to run the fuel lines. I bought the Tanks LS fuel line kit which includes Russell rubber line and barbed fittings. These are the twist loc kind that they show easily push together? BS. I know I have less hand strength than I used to but it's not gone and these are a bear! I started as they tell you to - oil the ends, clamp the fitting in the vise, twist the hose on - except - crap it won't go! So I tried sticking the hose in boiling water and that didn't help. I found the Koul EZ-ON Hose Press http://koultools.com/product/push-lock-hose-tool/ which looks awesome but it's $250! I'm sure I'd use it again but still - that's a bunch. Today I was searching here and found a link to the Summit braided fuel line kit for about $110. I'd have to figure out which snap on fittings to use to connect to my Corvette filter regulator but that should be cheaper than buying the Koul tool. Any thoughts or advice on this? I'd be happy to use the Russell kit, just struggling with paying for the Koul tool for ~6 fittings and it really pisses me off that I can't get the hose on those friction fittings. Thanks! __________________ __________________ Scott ______________ my '51 build: http://67-72chevytrucks.com/vboard/s...d.php?t=677979

10-08-2016, 07:50 PM	#2
BR3W CITY meowMEOWmeowMEOW Join Date: Sep 2009 Location: MKE WI Posts: 7,128	Re: Fuel Line Questions What I'm about to say might make people cringe, but hey, it works. AstroGlide __________________ *'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING* MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD

10-08-2016, 08:29 PM	#3
Advanced Design Senior Member Join Date: Jul 2012 Location: Oblong, Illinois Posts: 7,028	Re: Fuel Line Questions Here is a tool one of our members made for inserting the ends....https://youtu.be/xkUtVirwFHo __________________ Doug Advanced Design’s 1977 Blazer Build Advanced Design's '48 'Burb Build Mrs Advanced Design's '72 Suburban Advanced Design's 56 BelAir LS swap

10-08-2016, 08:41 PM	#4
Advanced Design Senior Member Join Date: Jul 2012 Location: Oblong, Illinois Posts: 7,028	Re: Fuel Line Questions Here is a simple tool a friend made for installing the Russell ends. It worked really well. Attached Images __________________ Doug Advanced Design’s 1977 Blazer Build Advanced Design's '48 'Burb Build Mrs Advanced Design's '72 Suburban Advanced Design's 56 BelAir LS swap

10-09-2016, 11:08 AM	#5
Scott2 Registered User Join Date: Mar 2015 Location: Castle Rock, CO Posts: 534	Re: Fuel Line Questions Doug, Thanks! Those are a couple of good suggestions that give me some ideas. Br3w, Not sure what to do about yours. If I asked more I'm afraid the answer would involve a squirt of the lube and a hose and then... Interesting suggestion though! __________________ Scott ______________ my '51 build: http://67-72chevytrucks.com/vboard/s...d.php?t=677979

10-10-2016, 11:19 AM	#6
BIGglaSS Registered User Join Date: May 2014 Location: ID Posts: 663	Re: Fuel Line Questions Br3w, thanks for the reminder to schedule my annual physical this month.

10-10-2016, 11:25 AM	#7
BR3W CITY meowMEOWmeowMEOW Join Date: Sep 2009 Location: MKE WI Posts: 7,128	Re: Fuel Line Questions Last time we built a multi-link suspension, there were so many poly bushings to install that we went through a full tube of the 'glide. I'm pretty sure the cashier at the store was curious why we stopped back in for 2 bottles in 2 days. Rough weekend. __________________ *'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING* MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.