WA Parting '72 1/2ton 2wd Suburban - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*randy500* · 12-17-2016, 09:41 PM

Going to get this burb tomorrow, I looked at it last week and made a deal on it today so here we go....Its dark olive and white exterior, custom deluxe with dark olive interior. I will take some pictures when I pick it up and post them tomorrow.

I will be using this for a crew cab build on my '71 3/4ton GMC so will be using the front body and front doors for that.

It has front and rear A/C. The rear A/C cover seems to be ok but missing some vents. There are some box speakers are mounted on speaker brackets to the front of it.

I think most of the headliner was there.

There are rear seat armrests with the metal frames, not sure from which seat as they are just in there loose...$75 for those plus shipping.

Rear A/C complete $400 plus shipping.

Its hatch and tailgate, both seem to be average condition, $150 each plus shipping.

It has the huge sheetmetal aftermarket large capacity fuel tank, unknown condition as it appears to have last been registered in 2004, $150 plus shipping.

It has the upper trim just below the windows.

Let me know what you need and put a price on what you want that is not listed for a starting point.

6772king · 12-17-2016, 10:44 PM

I'd like the rear wheel tubs if they are any good ...Also a patch for around the gas neck

**DeadheadNM** · 12-17-2016, 11:21 PM

Interested in the olive defrost vents if intact. Thanks.

**Bgrdmoose** · 12-17-2016, 11:25 PM

Interested in the 4 tank bolts & nuts as well as the sending unit.

**too much stuff** · 12-17-2016, 11:50 PM

Lower trim?

*randy500* · 12-18-2016, 12:08 AM

Quote:

Originally Posted by 6772king

I'd like the rear wheel tubs if they are any good ...Also a patch for around the gas neck

Will let you know what they look like when I get it home.

*randy500* · 12-18-2016, 12:10 AM

Quote:

Originally Posted by DeadheadNM

Interested in the olive defrost vents if intact. Thanks.

I should have some of those since this is the 3rd olive truck and not keeping olive on any of them. Will let you know.

*randy500* · 12-18-2016, 12:11 AM

Quote:

Originally Posted by Bgrdmoose

Interested in the 4 tank bolts & nuts as well as the sending unit.

I will look at what it has and let you know.

*randy500* · 12-18-2016, 12:12 AM

Quote:

Originally Posted by too much stuff

Lower trim?

It does have lower trim, unsure of condition. What pieces are you looking for?

BaggedBurban · 12-18-2016, 10:01 AM

If it has any of the circular plastic interior plugs that cover bolt/screw heads I will take them. Found on the upper inside of body near the windows and rear of body where the upper hatch mounts etc. Thanks!!!

1fast10 · 12-18-2016, 10:33 AM

Any pics of hatch. Also of ac console

**1968k20** · 12-18-2016, 11:44 AM

350 or 292?

*randy500* · 12-18-2016, 12:00 PM

Its 350, AT.

I will get pics up later today and respond to parts requests.

WannaBe68 · 12-18-2016, 12:25 PM

If it's worth your time...I'd be interested in one of the headliner bows. One that has the chrome plastic piece still in good condition.
If you're interested, post some pics, let me know how much and I'll PM you my info for shipping.
Thanks

**frankinstein** · 12-18-2016, 01:04 PM

I also need one headliner bow

**too much stuff** · 12-18-2016, 01:43 PM

Quote:

Originally Posted by randy500

It does have lower trim, unsure of condition. What pieces are you looking for?

I am missing the one behind the drivers door. (long one) But would be interested in any of the burb specific ones. My others are in so-so condition. So anything from the front doors back. Driver quality is fine.

Rust hole · 12-18-2016, 03:01 PM

interested in the tail gate and hatch any pics?

Bigdav160 · 12-18-2016, 05:44 PM

Speaking of lower moldings.

I am in need of the short one on the drivers left fender and the one between the 3rd door and the passenger rear tire.

2006gmcdmax · 12-18-2016, 08:41 PM

I'm interested in the hatch as well. Can you p.m. some pics? I am available for local pickup so you won't have to ahip it. Thanks.

*randy500* · 12-18-2016, 09:19 PM

I got it home and here are some pictures. I took a picture before and after I removed the speakers from the rear A/C unit. It looks like the 2 missing vents are sitting inside the A/C cover, I guess just pushed in....

*randy500* · 12-18-2016, 09:29 PM

Some more pictures, one of the rear seat armrests. The 3rd row seating has 2 seatbelts, green short retractors with no covers and black buckles. No pics of the seatbelts yet. Hatch is real rust but hardware seems ok.

*randy500* · 12-18-2016, 09:34 PM

Tailgate is pretty solid, some paint bubbling on the outside. Couple gas tank pictures and rear view of A/C cover. Pics suck as it was getting dark here.

Bigdav160 · 12-18-2016, 09:38 PM

Might be interested in the roof rack also

*randy500* · 12-18-2016, 09:42 PM

Quote:

Originally Posted by Bigdav160

Might be interested in the roof rack also

I will take some picture of it tomorrow...I looked at it and it seems small for the burb but maybe they are like that...haven't seen one in a long time.

**DeadheadNM** · 12-18-2016, 11:00 PM

Interested in the radiator too. Usable? OEM? Thanks.

12-17-2016, 09:41 PM	#1
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Parting '72 1/2ton 2wd Suburban Going to get this burb tomorrow, I looked at it last week and made a deal on it today so here we go....Its dark olive and white exterior, custom deluxe with dark olive interior. I will take some pictures when I pick it up and post them tomorrow. I will be using this for a crew cab build on my '71 3/4ton GMC so will be using the front body and front doors for that. It has front and rear A/C. The rear A/C cover seems to be ok but missing some vents. There are some box speakers are mounted on speaker brackets to the front of it. I think most of the headliner was there. There are rear seat armrests with the metal frames, not sure from which seat as they are just in there loose...$75 for those plus shipping. Rear A/C complete $400 plus shipping. Its hatch and tailgate, both seem to be average condition, $150 each plus shipping. It has the huge sheetmetal aftermarket large capacity fuel tank, unknown condition as it appears to have last been registered in 2004, $150 plus shipping. It has the upper trim just below the windows. Let me know what you need and put a price on what you want that is not listed for a starting point.

12-17-2016, 10:44 PM	#2
6772king Registered User Join Date: Feb 2002 Location: grove city pa usa Posts: 628	Re: Parting '72 1/2ton 2wd Suburban I'd like the rear wheel tubs if they are any good ...Also a patch for around the gas neck __________________ 67 chevy short step 2wd 427 71 chevy short fleet 4x4 396 72 gmc jimmy 2wd 377 71 chevy blazer 4x4 454 69 chevy longhorn 5.9l cummins 72 chevy 400 2wd custom camper 67 chevy lwb 4x4 454-in pieces 67 chevy panel soon 4x4-400 67 gmc dump 4x4 1 ton-305 WTF!! 72 chevy 3/4 ton 4x4 burb 350 70 chevy panel 2wd 302 5 speed tko "THERE IS NO REPLACMENT FOR DISPLACMENT"!!!!!!!

12-17-2016, 11:21 PM	#3
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,481	Re: Parting '72 1/2ton 2wd Suburban Interested in the olive defrost vents if intact. Thanks. __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

12-17-2016, 11:25 PM	#4
Bgrdmoose Senior Member Join Date: Aug 2012 Location: College Park, MD Posts: 437	Re: Parting '72 1/2ton 2wd Suburban Interested in the 4 tank bolts & nuts as well as the sending unit.

12-17-2016, 11:50 PM	#5
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,855	Re: Parting '72 1/2ton 2wd Suburban Lower trim? __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

12-18-2016, 10:01 AM	#10
BaggedBurban Registered User Join Date: Mar 2016 Location: Portland,OR Posts: 164	Re: Parting '72 1/2ton 2wd Suburban If it has any of the circular plastic interior plugs that cover bolt/screw heads I will take them. Found on the upper inside of body near the windows and rear of body where the upper hatch mounts etc. Thanks!!!

12-18-2016, 10:33 AM	#11
1fast10 Registered User Join Date: May 2016 Location: Youngsville NC Posts: 48	Re: Parting '72 1/2ton 2wd Suburban Any pics of hatch. Also of ac console

12-18-2016, 11:44 AM	#12
1968k20 Senior Member Join Date: Dec 2009 Location: Chester,California Posts: 5,632	Re: Parting '72 1/2ton 2wd Suburban 350 or 292? __________________ 1977 Chevrolet K10 SWB Project 350/4spd/np205 1977 Chevrolet K20 LWB 350/350/203 1991 4Runner 22RE 5 SPD Yanmar Tractor 3 Cyl Diesel

12-18-2016, 12:00 PM	#13
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Re: Parting '72 1/2ton 2wd Suburban Its 350, AT. I will get pics up later today and respond to parts requests.

12-18-2016, 12:25 PM	#14
WannaBe68 Registered User Join Date: Jun 2016 Location: Texas! Posts: 430	Re: Parting '72 1/2ton 2wd Suburban If it's worth your time...I'd be interested in one of the headliner bows. One that has the chrome plastic piece still in good condition. If you're interested, post some pics, let me know how much and I'll PM you my info for shipping. Thanks

12-18-2016, 01:04 PM	#15
frankinstein Senior Member Join Date: Jul 2016 Location: Anthem AZ Posts: 206	Re: Parting '72 1/2ton 2wd Suburban I also need one headliner bow

12-18-2016, 03:01 PM	#17
Rust hole Registered User Join Date: Mar 2013 Location: St. Augustine, Fl Posts: 59	Re: Parting '72 1/2ton 2wd Suburban interested in the tail gate and hatch any pics?

12-18-2016, 05:44 PM	#18
Bigdav160 Registered User Join Date: Apr 2011 Location: Klein Texas Posts: 3,852	Re: Parting '72 1/2ton 2wd Suburban Speaking of lower moldings. I am in need of the short one on the drivers left fender and the one between the 3rd door and the passenger rear tire. __________________ My Classics: '72 K20 Suburban + '65 Dodge Town Wagon '72 Corvette Roadster +'67 Corvette Roadster '73 Z-28 Camaro '63 Ford SWB Uni Pickup '50 Ford Coupe

12-18-2016, 08:41 PM	#19
2006gmcdmax Registered User Join Date: Oct 2014 Location: St. Paul Minnesota Posts: 195	Re: Parting '72 1/2ton 2wd Suburban I'm interested in the hatch as well. Can you p.m. some pics? I am available for local pickup so you won't have to ahip it. Thanks.

12-18-2016, 09:19 PM	#20
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Re: Parting '72 1/2ton 2wd Suburban I got it home and here are some pictures. I took a picture before and after I removed the speakers from the rear A/C unit. It looks like the 2 missing vents are sitting inside the A/C cover, I guess just pushed in.... Attached Images Last edited by randy500; 12-18-2016 at 09:21 PM. Reason: added description



Register or Log In To remove these advertisements.

12-18-2016, 09:29 PM	#21
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Re: Parting '72 1/2ton 2wd Suburban Some more pictures, one of the rear seat armrests. The 3rd row seating has 2 seatbelts, green short retractors with no covers and black buckles. No pics of the seatbelts yet. Hatch is real rust but hardware seems ok. Attached Images

12-18-2016, 09:34 PM	#22
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Re: Parting '72 1/2ton 2wd Suburban Tailgate is pretty solid, some paint bubbling on the outside. Couple gas tank pictures and rear view of A/C cover. Pics suck as it was getting dark here. Attached Images

12-18-2016, 09:38 PM	#23
Bigdav160 Registered User Join Date: Apr 2011 Location: Klein Texas Posts: 3,852	Re: Parting '72 1/2ton 2wd Suburban Might be interested in the roof rack also __________________ My Classics: '72 K20 Suburban + '65 Dodge Town Wagon '72 Corvette Roadster +'67 Corvette Roadster '73 Z-28 Camaro '63 Ford SWB Uni Pickup '50 Ford Coupe

12-18-2016, 11:00 PM	#25
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,481	Re: Parting '72 1/2ton 2wd Suburban Interested in the radiator too. Usable? OEM? Thanks. __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

Register or Log In To remove these advertisements.