Hub and rotor interchangeability question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ItsNotABlazer · 07-01-2001, 07:34 PM

I was wondering if the hubs from early 80's (82-83) 1/2 ton Chevy truck hub and rotors would fit with no modification on a 75 Jimmy. There doesnt appear to be any differences but just thought I would ask in here to see what you guys think.

TIA
Brad

------------------
1975 GMC Jimmy 2WD full convertible 350 soon to be TPI lowered leather

*Fast68Chevy* · 07-07-2001, 12:03 AM

same 73-87 2wd rotors, spindles, etc
On the L.D. models anyways, the Heavy Halfs and Big 10s are another story.

[This message has been edited by Fast68Chevy (edited 07-07-2001).]

07-01-2001, 07:34 PM	#1
ItsNotABlazer The full convertible guy Join Date: Jul 2001 Location: Paris Texas Posts: 728	Hub and rotor interchangeability question I was wondering if the hubs from early 80's (82-83) 1/2 ton Chevy truck hub and rotors would fit with no modification on a 75 Jimmy. There doesnt appear to be any differences but just thought I would ask in here to see what you guys think. TIA Brad ------------------ 1975 GMC Jimmy 2WD full convertible 350 soon to be TPI lowered leather __________________ 2012 Kawasaki Vaquero (Lime Green) 2000 BMW 740iL 1995 Chevy ECSB riding on air 1975 GMC Jimmy 2WD lowered 4/6 1972 Chevy Trazer soon to be roadster 1965 Mustang 289/3 speed (friends dad bought it new) 1964 Chevy C10 (dad bought it new)

07-07-2001, 12:03 AM	#2
Fast68Chevy Account Suspended Join Date: May 2000 Location: IL Posts: 0	same 73-87 2wd rotors, spindles, etc On the L.D. models anyways, the Heavy Halfs and Big 10s are another story. [This message has been edited by Fast68Chevy (edited 07-07-2001).]



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.