The 60-66 "PAYING IT FORWARD" thread!

[chevy2tom]

Originally Posted by Stepside6.5

MasturBation do have you figured out which way you are going to go on th 1406 carb?
Looking for one for my 65 Step Side
Thanks
Rick

^^^^ spell check on the name LMAO!!!

[Stepside6.5]

***Master Brian*** seats what happens when you don't proof read your posts you become comedy relief for the forum. I even got a chuckle when it was brought to my attention.

[Stepside6.5]

Chevy2Tom thanks for the reply glad to get a good laugh out of you this evening.

But autocorrect got me again on the next post changed see to seats. Either that or my eyes are older than I want to believe

[MASTERBrian]

Originally Posted by Stepside6.5

MasturBation do have you figured out which way you are going to go on th 1406 carb?
Looking for one for my 65 Step Side
Thanks
Rick

How big of hurry you in. I just finished building the 1405. I'm sure all is good with it, but was hoping to hang onto the 1406 until I fired her up to be certain. If you're in a bind let me know and I'll see about forwarding it on sooner.

I really can't see what would be wrong....
Posted via Mobile Device

[MASTERBrian]

Originally Posted by Stepside6.5

MasturBation do have you figured out which way you are going to go on th 1406 carb?
Looking for one for my 65 Step Side
Thanks
Rick

Wait...Wait...Wait...now I'm keeping it for sure!
Posted via Mobile Device

[chevy2tom]

Yep, funny **** right there

[Stepside6.5]

MasterBrian,

I'm not in a big hurry I'm currently trying to figure out what intake I am going to go with either carb would work for my build. It's a 68 327 out of a Camaro stock 2 barrel with a 700r4 behind it with 373 gears.

Thanks for the quick reply and a possibility of getting a carb at a reasonable price

Sorry to give the forum a good laugh due to my auto correct on this darn IPad

Rick

[aggie91]

Originally Posted by Jbshawstad

I have complete 1965 c10 short wheelbase frame. About to do frame swap, this one needs a home.

Do you still have it? Sent you a PM too. I need to do some work on mine to make it right. It be easier to just do the swap if yours is in good shape.

[53lowdown]

Rear end is gone




373 eaton rear end out of a 62 c10. It was usable but wanted a higher gear for highway so I swapped it out. Probable needs seals and possibly a pinion bearing. Complete with as pictured - Axles were redrilled to 5x4.75 bolt pattern.

[63C20]

I have a great condition ash tray for a 62 available for pickup in olympia washington

[MASTERBrian]

Originally Posted by Stepside6.5

MasterBrian,

I'm not in a big hurry I'm currently trying to figure out what intake I am going to go with either carb would work for my build. It's a 68 327 out of a Camaro stock 2 barrel with a 700r4 behind it with 373 gears.

Thanks for the quick reply and a possibility of getting a carb at a reasonable price

Sorry to give the forum a good laugh due to my auto correct on this darn IPad

Rick

No worries on the laugh, surprised I missed it the first time around. My fuel pump and line(s) should be here tomorrow, if the rain holds out, I'm hoping to have all of that together this weekend, so I can throw the front end back on and possibly fire her up next weekend. That'll tell me what I need to know. I'm sure I won't need the 1406, but again if I run into a major unknown, the backup is nice to have on hand. If you don't hear from me in about that much time, send me a PM....I tend to get sidetracked!

[Stepside6.5]

MasterBrian

Thanks for the response good luck with the weather. I know what you mean I have not gotten what I planned to get done because it has rained about every other day and they are calling for rain for 10 out of the next 14 days.

Rick

[aggie91]

Originally Posted by Jbshawstad

I have complete 1965 c10 short wheelbase frame. About to do frame swap, this one needs a home.

Originally Posted by aggie91

Do you still have it? Sent you a PM too. I need to do some work on mine to make it right. It be easier to just do the swap if yours is in good shape.

Jbshawstad - Hoping you use this...I will send another PM today too. I am really interested to talking to you about this frame...

[Isaiah92260]

Originally Posted by 63C20

I have a great condition ash tray for a 62 available for pickup in olympia washington

Is the ash tray still available? I'd like to see it & I'll pay for shipping!

[oem4me]

Center license plate thingy for a fleetside sport bumper. A tad rough, but still holds a license plate just fine. The original light was cut out at some point, but the working replacement covers the hole.
Pay the minimal shipping and it's yours.

[61Chevy454]

Can't wait till I get my truck back so I can give some stuff away!

[Raked 64]

I have a reproduction black radiator fan shroud for a 64-66 that is new. I am near Springfield Il. Don't want to ship it as it is bulky and will be a pain.
If someone can use it and is going to be in the area, PM me and I will hook you up.

[60chevyjim]

Originally Posted by oem4me

Center license plate thingy for a fleetside sport bumper. A tad rough, but still holds a license plate just fine. The original light was cut out at some point, but the working replacement covers the hole.
Pay the minimal shipping and it's yours.

hi I am interested in it my zip code is 27886
thanks jim

[sirJim]

This is NOT a WTB post. If someone posts up something they are giving away, you can ask for it but you cannot request items.

Thanks for your understanding.

[oem4me]

Originally Posted by 60chevyjim

hi I am interested in it my zip code is 27886
thanks jim

I'll get a quote for you tomorrow. Guessing $10 or less.

[oem4me]

Originally Posted by 60chevyjim

hi I am interested in it my zip code is 27886
thanks jim

PM sent.

[spookylynx]

My project is done and I have some stuff to give away.

I have...

A full 1965 cab:
low hump ,small back window, has typical rot in floor and corners but is not beyond repair. Dash, roof, A & B pillars & back panel all good.

A 1965 hood:
has damage to passenger front, but not beyond total repair, no rust.

1965 Gauge cluster:
everything works, I swapped in all AutoMeter stuff.

1965 inline 6:
Ran when pulled 3years ago, complete.

Everything is for free (or some beer donations). BUT!!! I'm not able to ship anything so you have to come get it.

Everything will be available until about June 3rd, then it is going to the recycler.

TXT me is best: 9-seven-0 - three - nine -0 - two - nine -two- zero

-Josh

[Jimal]

I love the spirit of this thread. I sold my '65 K10 back in January, but I still have some random parts lying around that I'm not going to use, but are too nice to toss.



Scuttle from a '63 pickup. Other than the red oxide primer, it appears to be in good shape. I didn't see any obvious pitting.



Set of LMC Truck bumper brackets for the rear of a short step. I ordered them just before buying a parts stash that had OEM bumpers and brackets that I ended up using. I never got around to returning them.



Misc. OEM bumper brackets and fender braces. No idea whether they are for our trucks or not, but they came with mine and besides, free parts fit better.

Local pick up from 06776 would be preferred, but I'll listen to offers for shipping if you pay.

DM me here or email me at jaltemus@snet.net

[LostMy65]

Rear stepside bumper brackets please to 97015. Business address

[sampsmit000]

Bumper Brackets and fender Braces to 84043. Residential