Help! 1969 C10 350 cranks over but no spark!

[marco69c10]

Ok so, I bought this 1969 C10. It was running great for the first week I bought it, I let it sit for a day and a half and it won't start. I'm not getting any spark. I've changed the cap,rotor,ignition control module and still noting. I'm lost on what could have gone wrong. One day it was running great, and the next it's gone. Anyone got any ideas?
It does have HEI and it is getting power to the coil.

[B Myers]

No spark with new parts make sure it is spinning with the motor in case your timing chain is bad, then there is the pickup coil and the secondary coil in the distributor, that's it for ignition if it has power and ground.

[marco69c10]

Originally Posted by B Myers

No spark with new parts make sure it is spinning with the motor in case your timing chain is bad, then there is the pickup coil and the secondary coil in the distributor, that's it for ignition if it has power and ground.

It is spinning. But I'll check the pick up coil thanks!