|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
06-29-2017, 02:37 AM
|
#1 |
|
Registered User
Join Date: Aug 2012
Location: Sweden
Posts: 4
|
PG modulator pin measurements
Hi all
I have misplaced the pin that goes between the vacuum modulator and the valve on my 65 aluminium powerglide. It came out when i pulled the modulator, and i have since misplaced it. Does anyone have the measurements or a pin to measure so i can make a new one? My parts store does not sell it. Any help appriciated! Posted via Mobile Device |
|
|
|
06-29-2017, 09:05 AM
|
#2 |
|
Registered User
Join Date: Sep 2010
Location: Winchester Oregon, formerly Vancouver BC
Posts: 2,949
|
Re: PG modulator pin measurements
Where is it, behind the modulator?
|
|
|
|
|
06-29-2017, 11:51 AM
|
#3 |
|
Registered User
Join Date: Aug 2012
Location: Sweden
Posts: 4
|
Re: PG modulator pin measurements
Yes. It will come out if you pull the modulator out from the transmission.
Posted via Mobile Device |
|
|
|
|
06-29-2017, 05:32 PM
|
#4 |
|
Registered User
Join Date: Aug 2012
Location: Sweden
Posts: 4
|
Problem solved, someone gave me the dimensions.
For future reference, pin is 1". OD is 0.2", Wall thickness is 0.01". It is a tube made from rolled steel plate. Posted via Mobile Device |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
