l83 gen v in a 68 c10

[RussTop]

Nice work, can you comment on how the Canev electric power steering pump is working; and also how the factory Ac compressor is working ( vintage air unit) or is the airconditioner the stock setup with the truck?

[aboesec10]

sure, the canev setup works well, it does have a little heavier feel to the wheels than your typical engine driven pump but not bad at all. its kinda cool to have power steering with just the key turned on.... The factory ac compressor is plumbed into my vintage air setup, it works great! I had some issues with the lines leaking a bit at the connection block after having them modified to fit the system but other than that its been working like a champ!

[Clyde65]

Can you link to your Ls1tech post?

I'd like to see the headers, mounts etc you used

Thanks

[aboesec10]

as far as headers, i used a set for a silverado, big pain in the ass!!! nothing like getting a set of $800 headers and cutting them up.... for motor mounts i used ict billets adapter plates and used the sbc mounts

[Clyde65]

I may have found an option for the headers. I'll keep y'all posted.

[Clyde65]

Originally Posted by aboesec10

as far as headers, i used a set for a silverado, big pain in the ass!!! nothing like getting a set of $800 headers and cutting them up.... for motor mounts i used ict billets adapter plates and used the sbc mounts

Could you PM me the link to your ls1tech post? The more info I have the better!!