|
07-31-2017, 08:27 PM
|
#1 |
|
Registered User
Join Date: Sep 2015
Location: Pottsville, Pa
Posts: 18
|
Driveshafts
I have a 1979 Chevy k20 long bed that came with a turbo 350 and 203 transfer case. I'm changing over to a sm465 and 205 transfer case. I know the driveshafts mostly won't work. I'm not having any luck finding any in a junkyard. Any help would be great.
|
|
|
|
07-31-2017, 08:34 PM
|
#2 |
|
Registered User
 
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,711
|
Re: Driveshafts
Probably better to ask over on the 73/80 something board. Several 4x guys there.
__________________
Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around. |
|
|
|
|
07-31-2017, 08:40 PM
|
#3 |
|
Registered User
Join Date: Sep 2015
Location: Pottsville, Pa
Posts: 18
|
Re: Driveshafts
Yeah I just realized I posted in the wrong year. Sorry about that. I was trying to delete post but not completely sure how.
|
|
|
|
|
07-31-2017, 09:41 PM
|
#4 |
|
Post Whore
 
Join Date: May 2015
Location: Alabama
Posts: 14,671
|
Re: Driveshafts
might get on here and look around...its like a craigslist for junkyards....http://www.car-part.com/mobile/index.htm
|
|
|
|
|
08-01-2017, 07:49 AM
|
#5 |
|
Registered User
Join Date: Nov 2015
Location: Jemez Springs, NM
Posts: 435
|
Re: Driveshafts
Look at Southwest Speed. I have bought two new shafts from them with good results
|
|
|
|
|
08-01-2017, 01:09 PM
|
#6 |
|
Registered User
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,711
|
Re: Driveshafts
I'd be looking for the closest good driveshaft shop that is used to dealing with the 4x4 guys.
You can do the wrecking yard thing and try to mix and match and most likely get away with the front half of a driveshaft that goes with the 205 transfer or take a whole lot less time and go to a driveshaft shop and have them build you the front half. You might also want to look on http://www.pirate4x4.com/welcome1.php When it comes to changing stuff around on 4x4 rigs the members on there have a lot of knowledge.
__________________
Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around. |
|
|
|
|
08-01-2017, 01:19 PM
|
#7 |
|
Registered User
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,711
|
Re: Driveshafts
Looks like the front driveshaft with the manual is shorter according to the offerings from Rock Auto.
https://www.rockauto.com/en/catalog/...ive+shaft,2308 Wait several seconds for that to load as it takes a bit to get the info up. They don't show the other shafts though.
__________________
Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around. |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
