FS 86 K10 plus collection of extra parts

[mhorning]

Well guys,
I just bought a 99 Z71 So my wife says I have to sell my 86 K10. I have a bunch of old Chevy's, so I'm also going to get rid of my 80s parts with the deal. Read on for details.

Here are the specs.

86 K10 105,000 miles. New rebuilt 350 with less than 4000 miles on it. The engine is a 91 block 4 bolt main, flat top pistons, summit cam 224 duration 465 lift and exhaust, 64 cc heads. Edelbrock Intake and Edelbrock Carb (1906). I’ve also installed Proform black crinkle covers and an Edelbrock air cleaner.

In the past year, I have installed new on the truck an entire exhaust system with headers, a starter, an alternator, brakes and rotors, and tires (less than 2000 miles on them)

Inside the truck has a decent interior. The seat is shot, but I have a decent cover on it. The dash has one crack near the speaker, but looks pretty good. The truck has power windows, locks, cruise, tilt, delayed wipers, and air. The cruise and delays do not work, everything else does. A/C could probably be charged, but it’s been converted to 134. I’ve also installed an AIWA CD player.

Outside the truck is in good shape. It has some rust at the cab corners, not completely through yet, but I would probably replace them. The paint is ok, but I was going to repaint the truck black. It also has a light bar (not shown) a chrome drop bumper in the back, and a chrome brush guard in the front.

Other details. The front and rear of the truck is a 3.08 and the tranny is a 700R4 which I also just replaced. It wasn’t a new tranny, but one that came from an 88 truck which I am told was a better year for the 700R4.

Also, if you get this truck, you can have all of my extra parts for it which include:

A running 350- fuel injected from an 87 suburban
An extra 700R4 Transmission good condition
Extra tailgate, the one on it is rusting in the corners, this an original GM in great shape.
An extra radiator, the current one leaks near the cap, you can either replace it or solder the one in it. It doesn’t have a hole, just leaks by the overflow hose.
About 3 Carbs –Qudrajet M4MED- some work fine others need rebuilt
A bunch of window motors, regulators
An extra drivers side fender
An extra set of heads (I think 64 cc, but not sure on that)
A whole bunch of miscellaneous stuff like gaskets, switches, etc.

This truck has been my project for the last year, but my wife and I just recently had our first child, so I decided to look for an extended cab. I’m selling it to help reduce the loan on my newer truck.
It is a very sound truck and could be driven daily. It would also make a good project for someone to continue to restore. I thought I would offer it to someone on the board before, I put it in the paper.

I have well over 4000 into the truck as it is, but I am asking 2900 for it plus you get all the parts above. If interested pm me, or call me at 607-523-6672 or 607-329-0334 (Cell). Ask for Mike.

Also, I’m located in Corning, NY, about 1 hour west of Binghamton.

Mike

[mhorning]

Extra pics

[mhorning]

interior

[mhorning]

passengers side

[jared stewart]

Man, if you lived a little closer to Missouri I'd take all that stuff off your hands in a heart beat (it might cause a divorce, but it looks like it might be worth it)

Any chance you'd want to sell the carbs seperate?
Nice looking truck.

[gldevall]

Man, the good deals are always so far away.

[greg0380]

Mike, are you still looking to get rid of the FI setup we talked about a couiple of weeks ago.
Greg.

[highboy_04]

i still want the motor i just have no way to get it

[mhorning]

Greg,

I sent you a pm

Mike

[2birds40]

hey mike i sent you a pm and i live 20mins outside corning

[mhorning]

2birds40 I sent you a pm

[greg0380]

Mike, i sent you a pm