refinishing seat bases(tracks) - The 1947 - Present Chevrolet & GMC Truck Message Board Network

oldtrux · 10-15-2017, 10:03 AM

whats everyone doing?paint,powder coat,plating?do they come apart?thx

forestb · 10-18-2017, 04:41 PM

I was wondering the same thing. After they are apart what is the best way to get some surface rust off of them without messing up the surface of the tracts?

**The Rocknrod** · 10-18-2017, 04:45 PM

I used Ospho three coats in fifteen minutes. Rinsed and dried with drier/heater. Only thing I needed to do was then use a satin clear coat on them. But in the track area I used dry lube (spray). My tracks work better than I would have thought.

oldtrux · 10-18-2017, 06:37 PM

wow,just googled ospho(never heard of that stuff)great idea!better than blasting.thanks rocknrod

**The Rocknrod** · 10-18-2017, 08:46 PM

Ya, you know just have to be careful with it as it is an acid. Get some cheap 1" or 2" brushes, googles and nitrile gloves. Don't get it on you without rinsing it off right away. At least that's how I deal with it. Results may vary.

oldtrux · 10-19-2017, 07:31 PM

Hey rocknrod,I forgot to ask...did you disassemble yours?

**The Rocknrod** · 10-19-2017, 08:04 PM

No I tried on one set and screwed the pooch not sure if anyone has for that matter. The second set I didnt.

**nsb29** · 10-19-2017, 11:32 PM

Quote:

Originally Posted by The Rocknrod

No I tried on one set and screwed the pooch not sure if anyone has for that matter. The second set I didnt.

I've taken them all apart and put them back together there a lot of work leave them together most people never get them back together

10-15-2017, 10:03 AM	#1
oldtrux Registered User Join Date: Jul 2010 Location: Bancroft, ontario Posts: 555	refinishing seat bases(tracks) whats everyone doing?paint,powder coat,plating?do they come apart?thx

10-18-2017, 04:41 PM	#2
forestb Registered User Join Date: Jan 2009 Location: Burbank, CA Posts: 3,619	Re: refinishing seat bases(tracks) I was wondering the same thing. After they are apart what is the best way to get some surface rust off of them without messing up the surface of the tracts?

10-18-2017, 04:45 PM	#3
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: refinishing seat bases(tracks) I used Ospho three coats in fifteen minutes. Rinsed and dried with drier/heater. Only thing I needed to do was then use a satin clear coat on them. But in the track area I used dry lube (spray). My tracks work better than I would have thought. __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

10-18-2017, 06:37 PM	#4
oldtrux Registered User Join Date: Jul 2010 Location: Bancroft, ontario Posts: 555	Re: refinishing seat bases(tracks) wow,just googled ospho(never heard of that stuff)great idea!better than blasting.thanks rocknrod

10-18-2017, 08:46 PM	#5
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: refinishing seat bases(tracks) Ya, you know just have to be careful with it as it is an acid. Get some cheap 1" or 2" brushes, googles and nitrile gloves. Don't get it on you without rinsing it off right away. At least that's how I deal with it. Results may vary. __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

10-19-2017, 07:31 PM	#6
oldtrux Registered User Join Date: Jul 2010 Location: Bancroft, ontario Posts: 555	Re: refinishing seat bases(tracks) Hey rocknrod,I forgot to ask...did you disassemble yours?

10-19-2017, 08:04 PM	#7
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: refinishing seat bases(tracks) No I tried on one set and screwed the pooch not sure if anyone has for that matter. The second set I didnt. __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.