My 52 GMC Build - Page 72 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

lower50's · 11-15-2017, 03:46 PM

Quote:

Originally Posted by rusty76

Thought of your trip to pilot mountain. I worked not far from there. This was my view at work today. Darn sideways pic. I swear pilot is there. Lol.

Ya beautiful place.

Quote:

Originally Posted by YahamaR1

Wowwww..

What a space.. really Nice..

Thanks it's getting there.

lower50's · 11-15-2017, 03:53 PM

Shop update: Got the in floor heating system filled with fluid today. Took about 3 hrs to get it filled and air out but it will work. I put 40psi in the system and turned on the thermostat that turns the pump on and the water flow turns the heater turned on. I just don't have gas hooked up yet so it gave me a fault code, but it works. Gas should be next week.
Name: IMG_5740.jpg
Views: 519
Size: 53.4 KB

Name: IMG_5740.jpg
Views: 519
Size: 53.4 KB

rusty76 · 11-15-2017, 07:14 PM

Hopefully it’ll be toasty before too much longer. Nice and warm.

**Dieselwrencher** · 11-16-2017, 05:31 PM

Very cool! I need to think about getting my heater serviced and fired up. It's already been below 20 over night here 3-5 times. Winter might actually be winter this year?

lower50's · 11-17-2017, 07:01 PM

Quote:

Originally Posted by rusty76

Hopefully it’ll be toasty before too much longer. Nice and warm.

I'm hoping. It feels half warm in there since the insulation.

Quote:

Originally Posted by Dieselwrencher

Very cool! I need to think about getting my heater serviced and fired up. It's already been below 20 over night here 3-5 times. Winter might actually be winter this year?

It has gotten that cold here a few nights too, but have been sitting around 35-40* most days.

lower50's · 11-20-2017, 11:09 AM

Shop update: We had another huge weekend in the shop. Called in some friends again and Saturday took us 10hrs but we got the dry wall up on the ceiling. Others where working on the walls. A few of us spent 6hrs and finished up the walls on Sunday. I feel like I got hit by a truck lol. But so happy.
Name: IMG_5759.jpg
Views: 420
Size: 46.9 KB

Name: IMG_5759.jpg
Views: 420
Size: 46.9 KB

Name: IMG_5758.jpg
Views: 422
Size: 47.6 KB

Name: IMG_5755.jpg
Views: 454
Size: 41.4 KB

OutlawDrifter · 11-20-2017, 11:13 AM

Nice work. You'll love the OSB walls. It's nice to be able to hang something wherever you want! I painted mine with 2 coats of Behr paint, no primer underneath. I'll have to get the details off the buckets. Took 9 gallons total, and it covered very well.

**joedoh** · 11-20-2017, 11:23 AM

man you are going to be snug as a bug

99 to Life · 11-20-2017, 01:47 PM

whoooooahhhhhh like house quality up in there. can't wait to see the awesome work you'll be pushing outta that place.

**Advanced Design** · 11-20-2017, 02:41 PM

Looks very nice! You have awesome friends!

**Dieselwrencher** · 11-20-2017, 04:18 PM

Very cool! I was going to say, paint that plywood now! Because you will be amazed how fast you can't get to them and they will never get painted.

Plus it will make it brighter in there too.

rusty76 · 11-20-2017, 07:32 PM

Very nice. I like it.

**oldman3** · 11-20-2017, 08:27 PM

Lower, it looks super. What are friends for, if you can't use them once in awhile

, keep up the great work...Jim

lower50's · 11-21-2017, 09:48 AM

Quote:

Originally Posted by OutlawDrifter

Nice work. You'll love the OSB walls. It's nice to be able to hang something wherever you want! I painted mine with 2 coats of Behr paint, no primer underneath. I'll have to get the details off the buckets. Took 9 gallons total, and it covered very well.

Ya my neighbor has a commercial airless sprayer I'll be using that. I'm also getting paint with his account.

Quote:

Originally Posted by joedoh

man you are going to be snug as a bug

I will probably live out there

Quote:

Originally Posted by 99 to Life

whoooooahhhhhh like house quality up in there. can't wait to see the awesome work you'll be pushing outta that place.

I'm slowly looking for my next truck.

Quote:

Originally Posted by Advanced Design

Looks very nice! You have awesome friends!

Thanks They are great

Quote:

Originally Posted by Dieselwrencher

Very cool! I was going to say, paint that plywood now! Because you will be amazed how fast you can't get to them and they will never get painted.

Plus it will make it brighter in there too.

It's very tempting to move stuff in but you are right it would never get done. also with the lights I am putting in should be like an operating room for vehicles.

Quote:

Originally Posted by rusty76

Very nice. I like it.

Thanks Matt

Quote:

Originally Posted by oldman3

Lower, it looks super. What are friends for, if you can't use them once in awhile

, keep up the great work...Jim

That's right. What goes around comes around.

**Dieselwrencher** · 11-21-2017, 03:18 PM

Quote:

Originally Posted by lower50's

It's very tempting to move stuff in but you are right it would never get done. also with the lights I am putting in should be like an operating room for vehicles.

I speak from experience. I never got my big bay painted at the shop I put up at my parent's place. My garage at home has dry wall but no one ever painted it. Well, I failed there too. Now it is good enough until we move.

TIREDIRN · 11-21-2017, 04:05 PM

Great looking shop, a shop like that you must be thinking about another project!

lower50's · 11-22-2017, 08:21 AM

Quote:

Originally Posted by Dieselwrencher

I speak from experience. I never got my big bay painted at the shop I put up at my parent's place. My garage at home has dry wall but no one ever painted it. Well, I failed there too. Now it is good enough until we move.

Ya I hear you.

Quote:

Originally Posted by TIREDIRN

Great looking shop, a shop like that you must be thinking about another project!

Thanks Gary. Yes I am thinking, just a few other things I have to do first.

lower50's · 11-22-2017, 09:47 AM

Shop update:
Gas got hooked up yesterday so when I got home I got the heater turned on.

I have to start slow so I just went a few degrees above floor temperature to start. The thermostat is for in floor heat so it cycles on and off till it gets to it's set temp. Then this morning the floor had gotten to that new temp so I went up a few more degrees. So far so good.
Name: IMG_5779.jpg
Views: 359
Size: 51.0 KB

Name: IMG_5779.jpg
Views: 359
Size: 51.0 KB

**oldman3** · 11-22-2017, 09:52 AM

Lower, that's going to be nice and warm...Jim

rusty76 · 11-23-2017, 01:04 AM

So glad to see things working out for you.

lower50's · 11-23-2017, 11:26 AM

Quote:

Originally Posted by oldman3

Lower, that's going to be nice and warm...Jim

I'm not sure how warm it will be in there before I get the big door, but it is ok to work in there right now

Quote:

Originally Posted by rusty76

So glad to see things working out for you.

Me too.

lower50's · 11-23-2017, 11:32 AM

Shop update:
Last night I bought 10gal of primer and 10gal of semi gloss paint. I borrowed my neighbors airless sprayer and went to town painting. Didn't even need a ladder with the nozzle extension. In just over an hour I sprayed the 10gal of primer then after dinner in about 1.5hrs I got the 10gal of semi on the walls. So nice and fast.
Name: IMG_5783.jpg
Views: 322
Size: 44.6 KB

Name: IMG_5783.jpg
Views: 322
Size: 44.6 KB

Name: IMG_5782.jpg
Views: 316
Size: 14.4 KB

OutlawDrifter · 11-23-2017, 11:35 AM

Nice! It took me a few days rolling on 2 coats!

**Dieselwrencher** · 11-23-2017, 01:46 PM

That looks so nice and good work getting it done so fast!

rusty76 · 11-23-2017, 06:54 PM

Now we are getting somewhere.

11-15-2017, 03:53 PM	#1777
lower50's Registered User Join Date: Oct 2014 Location: Kitchener, Ontario, Canada Posts: 3,254	Re: My 52 GMC Build Shop update: Got the in floor heating system filled with fluid today. Took about 3 hrs to get it filled and air out but it will work. I put 40psi in the system and turned on the thermostat that turns the pump on and the water flow turns the heater turned on. I just don't have gas hooked up yet so it gave me a fault code, but it works. Gas should be next week. __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=648459 https://67-72chevytrucks.com/vboard/...d.php?t=769441 1951 MG TD 1967 Jeep CJ5 1.9L TDI 33X13.5X15 Mud Grapplers. 1952 GMC 9700 p/u 7.3L diesel on air, dually

11-15-2017, 07:14 PM	#1778
rusty76 Registered User Join Date: Sep 2012 Location: Midway, NC Posts: 3,275	Re: My 52 GMC Build Hopefully it’ll be toasty before too much longer. Nice and warm. __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=581873 The low buck build threads. Check'em out! http://67-72chevytrucks.com/vboard/s...d.php?t=666022 My build thread Crossmembers CC

11-16-2017, 05:31 PM	#1779
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,142	Re: My 52 GMC Build Very cool! I need to think about getting my heater serviced and fired up. It's already been below 20 over night here 3-5 times. Winter might actually be winter this year? __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

11-20-2017, 11:09 AM	#1781
lower50's Registered User Join Date: Oct 2014 Location: Kitchener, Ontario, Canada Posts: 3,254	Re: My 52 GMC Build Shop update: We had another huge weekend in the shop. Called in some friends again and Saturday took us 10hrs but we got the dry wall up on the ceiling. Others where working on the walls. A few of us spent 6hrs and finished up the walls on Sunday. I feel like I got hit by a truck lol. But so happy. __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=648459 https://67-72chevytrucks.com/vboard/...d.php?t=769441 1951 MG TD 1967 Jeep CJ5 1.9L TDI 33X13.5X15 Mud Grapplers. 1952 GMC 9700 p/u 7.3L diesel on air, dually

11-20-2017, 11:13 AM	#1782
OutlawDrifter Registered User Join Date: Aug 2012 Location: Northeast KS Posts: 1,789	Re: My 52 GMC Build Nice work. You'll love the OSB walls. It's nice to be able to hang something wherever you want! I painted mine with 2 coats of Behr paint, no primer underneath. I'll have to get the details off the buckets. Took 9 gallons total, and it covered very well. __________________ 1999 GMC Suburban K2500 SLT, 454/4L80E 1991 Z/28, 6.0L/T56 1949 GMC 250, S10 Frame, 6.0L/4L80E Instagram @aceshighspeedshop

11-20-2017, 11:23 AM	#1783
joedoh Senior Member Join Date: May 2007 Location: Doodah Kansas Posts: 7,774	Re: My 52 GMC Build man you are going to be snug as a bug __________________ the mass of men live lives of quiet desperation if there is a problem, I can have it. new project WAYNE http://67-72chevytrucks.com/vboard/s...d.php?t=844393

11-20-2017, 01:47 PM	#1784
99 to Life Registered User Join Date: Jan 2010 Location: Titusville, PA Posts: 3,585	Re: My 52 GMC Build whoooooahhhhhh like house quality up in there. can't wait to see the awesome work you'll be pushing outta that place. __________________ 51' 99toLife finished 2011,355 sbc,5speed, patina, redoing whole truck, inter, bags, etc http://67-72chevytrucks.com/vboard/s...d.php?t=382481 49Hardtimes s/10 susp- bagged, vortec sbc, 5 speed, patina, sold http://67-72chevytrucks.com/vboard/s...d.php?t=594874 VIDEOS https://youtu.be/E8zHhjgS_lA https://youtu.be/E8zHhjgS_lA Geronimo 54' LS engine, static drop IFS, Client build, just about done http://67-72chevytrucks.com/vboard/s...62#post7399162 52' 3100 Slowly in progress, will be painted two toned, have 235 with a t-5, lowered OG frame Other projects, 49' farmuse 3100, killer Patina, will be slammed, LS engine, full done interior up next! www.coffeeandcustoms.com

11-20-2017, 02:41 PM	#1785
Advanced Design Senior Member Join Date: Jul 2012 Location: Oblong, Illinois Posts: 7,028	Re: My 52 GMC Build Looks very nice! You have awesome friends! __________________ Doug Advanced Design’s 1977 Blazer Build Advanced Design's '48 'Burb Build Mrs Advanced Design's '72 Suburban Advanced Design's 56 BelAir LS swap

11-20-2017, 04:18 PM	#1786
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,142	Re: My 52 GMC Build Very cool! I was going to say, paint that plywood now! Because you will be amazed how fast you can't get to them and they will never get painted. Plus it will make it brighter in there too. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

11-20-2017, 07:32 PM	#1787
rusty76 Registered User Join Date: Sep 2012 Location: Midway, NC Posts: 3,275	Re: My 52 GMC Build Very nice. I like it. __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=581873 The low buck build threads. Check'em out! http://67-72chevytrucks.com/vboard/s...d.php?t=666022 My build thread Crossmembers CC

11-20-2017, 08:27 PM	#1788
oldman3 Senior Member Join Date: Mar 2011 Location: West Plains, Missouri Posts: 7,559	Re: My 52 GMC Build Lower, it looks super. What are friends for, if you can't use them once in awhile , keep up the great work...Jim __________________ my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br />

11-21-2017, 04:05 PM	#1791
TIREDIRN Registered User Join Date: Jul 2015 Location: Sandford, ON. Canada Posts: 12	Re: My 52 GMC Build Great looking shop, a shop like that you must be thinking about another project! __________________ Gary 54 Pickup project! 61 Impala 2 Door Post 409 - Done!

11-22-2017, 09:47 AM	#1793
lower50's Registered User Join Date: Oct 2014 Location: Kitchener, Ontario, Canada Posts: 3,254	Re: My 52 GMC Build Shop update: Gas got hooked up yesterday so when I got home I got the heater turned on. I have to start slow so I just went a few degrees above floor temperature to start. The thermostat is for in floor heat so it cycles on and off till it gets to it's set temp. Then this morning the floor had gotten to that new temp so I went up a few more degrees. So far so good. __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=648459 https://67-72chevytrucks.com/vboard/...d.php?t=769441 1951 MG TD 1967 Jeep CJ5 1.9L TDI 33X13.5X15 Mud Grapplers. 1952 GMC 9700 p/u 7.3L diesel on air, dually

11-22-2017, 09:52 AM	#1794
oldman3 Senior Member Join Date: Mar 2011 Location: West Plains, Missouri Posts: 7,559	Re: My 52 GMC Build Lower, that's going to be nice and warm...Jim __________________ my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br />

11-23-2017, 01:04 AM	#1795
rusty76 Registered User Join Date: Sep 2012 Location: Midway, NC Posts: 3,275	Re: My 52 GMC Build So glad to see things working out for you. __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=581873 The low buck build threads. Check'em out! http://67-72chevytrucks.com/vboard/s...d.php?t=666022 My build thread Crossmembers CC



Register or Log In To remove these advertisements.

11-23-2017, 11:32 AM	#1797
lower50's Registered User Join Date: Oct 2014 Location: Kitchener, Ontario, Canada Posts: 3,254	Re: My 52 GMC Build Shop update: Last night I bought 10gal of primer and 10gal of semi gloss paint. I borrowed my neighbors airless sprayer and went to town painting. Didn't even need a ladder with the nozzle extension. In just over an hour I sprayed the 10gal of primer then after dinner in about 1.5hrs I got the 10gal of semi on the walls. So nice and fast. __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=648459 https://67-72chevytrucks.com/vboard/...d.php?t=769441 1951 MG TD 1967 Jeep CJ5 1.9L TDI 33X13.5X15 Mud Grapplers. 1952 GMC 9700 p/u 7.3L diesel on air, dually

11-23-2017, 11:35 AM	#1798
OutlawDrifter Registered User Join Date: Aug 2012 Location: Northeast KS Posts: 1,789	Re: My 52 GMC Build Nice! It took me a few days rolling on 2 coats! __________________ 1999 GMC Suburban K2500 SLT, 454/4L80E 1991 Z/28, 6.0L/T56 1949 GMC 250, S10 Frame, 6.0L/4L80E Instagram @aceshighspeedshop

11-23-2017, 01:46 PM	#1799
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,142	Re: My 52 GMC Build That looks so nice and good work getting it done so fast! __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

11-23-2017, 06:54 PM	#1800
rusty76 Registered User Join Date: Sep 2012 Location: Midway, NC Posts: 3,275	Re: My 52 GMC Build Now we are getting somewhere. __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=581873 The low buck build threads. Check'em out! http://67-72chevytrucks.com/vboard/s...d.php?t=666022 My build thread Crossmembers CC

Register or Log In To remove these advertisements.