Body Mount Dimensions / Height

[CJM72]

Does anyone have a picture or dimension for the height of a new front cab body mount? I'm having some header clearance issues, and I concerned that my body mounts are sagging. Sorry about rotate picture, but that's the only way I could fit my phone in there for a pic.

Mine are about 1.25" between the frame mount and the bottom of my torque boxes. This includes two 1/8" shims that the previous owner installed. I think my floor was about 3.5" from the frame mount.

[CJM72]

I updated my clearance thread on the LSX Swap page, but I should do the same here. Found out I can read 'LMC' on one of the front cab mounts. Were probably replaced about 2 years ago when the previous owner fixed the floors and rockers.

These probably are not as collapsed as I had 'hoped', and the condition looks decent despite being painted over. I'll compare to the Classic Heartbeat mounts when they show up.

[7D2N]

CJM72, I put new mounts in not long ago although not LMC they measure 1 1/4" as yours with shims. I did shimming and re shimming in the A and B pillar spots and with some door adjustment it looks better.

7D2N