looking for a wiper motor. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ch3vynoob · 03-15-2017, 08:49 AM

Any help is greatly appreciated. Any links any one may have already found that i have not. I know i can buy the electronic one for 200 on eBay but was wondering if anyone had seen or heard of anything cheaper that will work in my 1960 truck. It is a motor that lays flat on the fire wall. under the dash. mine is vacuum and does not work i can hear clicking inside the motor but thats it pretty sure its trash. Thanks

jbgroby · 03-15-2017, 09:32 AM

Try Newport Eng. this is who I'm ordering a wiper motor from next month.

https://newportwipers.com/

This is the one that fits our flat firewall wiper motor. $219.95. The Clean Wiper Drive is a true bolt-in replacement for your O.E.M. electric windsheild wiper motor. Each kit comes complete with all the necessary hardware to install the wiper drive in the factory mounting holes. (NOTE: THIS IS A BRAND NEW MOTOR, NOT A REBUILT MOTOR)

**THERE ARE 2 DIFFERENT MOTORS FOR THIS SERIES OF TRUCK, ONE MOTOR LAYS FLAT ON THE FIREWALL(NE6066CTF)

https://newportwipers.com/product/19...l/#wiper-motor

61K10 · 03-15-2017, 01:20 PM

My 61 w/motor is different than a 64-66. It's mounting is a little different. 63? Any body know if you can put a 64-66 in a earlier tk?

**DPowers** · 03-15-2017, 09:33 PM

This is out of a '63- look like yours?

BabyBlue64 · 03-16-2017, 08:55 AM

I should first try to open the motor. A while ago I had the same issue with a wiper motor of a '61 corvette. You heard just a click and nothing happens. Because of the very old crease inside it some parts where sticking together. Just cleaned everything, new grease, and the motor was working again.

61K10 · 03-16-2017, 01:40 PM

DPowers--No. It like the 64-66. My 61 does not use the rubber washers that slip into the motor shell and has an o-ring type seal, not like the one on your 63.

ch3vynoob · 03-23-2017, 03:08 PM

I think I will try opening it and cleaning it out. I'll keep you guys updated. Mine does not look like the picture posted above. Mine is longer and lays flat against the firewall.

Northwest Outlaw · 04-24-2017, 01:55 PM

following along on this as my '61 wiper motor isn't working either. It has power to it from both the constant and the switch but nothing happens. Hoping to find a less that $200 fix for a simple thing like the wipers.

jbgroby · 04-24-2017, 01:59 PM

CH3 and Northwest

Pls. Pm me, I just ordered a new 2 speed from Newport Friday. Does yours look like this?

**The Rocknrod** · 03-16-2018, 09:31 AM

Quote:

Originally Posted by jbgroby

CH3 and Northwest

Pls. Pm me, I just ordered a new 2 speed from Newport Friday. Does yours look like this?

Does anyone have a pic of their Newport wiper motor after install? Behind the dash.

jbgroby · 03-16-2018, 09:46 AM

Yes, I made the switch, Pictures attached. FYI I did a tutorial on the install if you search the listings.

**The Rocknrod** · 03-16-2018, 10:44 AM

Quote:

Originally Posted by jbgroby

Yes, I made the switch, Pictures attached. FYI I did a tutorial on the install if you search the listings.

So that must be a 60/61 install? Because mine has a flange/bracket that sticks out from the firewall where the motor attaches to it.

jbgroby · 03-16-2018, 11:06 AM

Yep, I have a 60 GMC

**The Rocknrod** · 03-16-2018, 11:19 AM

I was going to post a pic of my bracket but when I went to the shop the camera battery went bad. To make things worse I cant find the other camera, I can find the battery charger for both of them but the camera... I'm sure I didn't put it in the dryer.
Here it is - If it were a snake it would have bit me:

**Palf70Step** · 03-16-2018, 11:52 AM

The Newport motor can be ordered to fit any of the 60-66 mounting styles. I happened to order mine thru brothers when they were on sale. Best thing ever for these year trucks. Going from 1 speed to 2 good speeds was great. There is even the option to added intermittent to them later if you are tight for money now.

03-15-2017, 08:49 AM	#1
ch3vynoob Registered User Join Date: Dec 2016 Location: Chattanooga tennessee Posts: 9	looking for a wiper motor. Any help is greatly appreciated. Any links any one may have already found that i have not. I know i can buy the electronic one for 200 on eBay but was wondering if anyone had seen or heard of anything cheaper that will work in my 1960 truck. It is a motor that lays flat on the fire wall. under the dash. mine is vacuum and does not work i can hear clicking inside the motor but thats it pretty sure its trash. Thanks

03-15-2017, 09:32 AM	#2
jbgroby Registered User Join Date: Nov 2008 Location: Lacombe, LA Posts: 2,772	Re: looking for a wiper motor. Try Newport Eng. this is who I'm ordering a wiper motor from next month. https://newportwipers.com/ This is the one that fits our flat firewall wiper motor. $219.95. The Clean Wiper Drive is a true bolt-in replacement for your O.E.M. electric windsheild wiper motor. Each kit comes complete with all the necessary hardware to install the wiper drive in the factory mounting holes. (NOTE: THIS IS A BRAND NEW MOTOR, NOT A REBUILT MOTOR) **THERE ARE 2 DIFFERENT MOTORS FOR THIS SERIES OF TRUCK, ONE MOTOR LAYS FLAT ON THE FIREWALL(NE6066CTF) https://newportwipers.com/product/19...l/#wiper-motor __________________ http://s1299.photobucket.com/user/jb...23904108567829

03-15-2017, 01:20 PM	#3
61K10 Registered User Join Date: Feb 2012 Location: pleasant valley--placerville ca Posts: 3,039	Re: looking for a wiper motor. My 61 w/motor is different than a 64-66. It's mounting is a little different. 63? Any body know if you can put a 64-66 in a earlier tk? __________________ 1961 chevy K10 my build is------------61K10 build

03-15-2017, 09:33 PM	#4
DPowers One foot in front of the other Join Date: Aug 2008 Location: Parrottsville, TN Posts: 5,442	Re: looking for a wiper motor. This is out of a '63- look like yours? Attached Images __________________ DP's 66 Build http://67-72chevytrucks.com/vboard/s...d.php?t=361556

03-16-2017, 08:55 AM	#5
BabyBlue64 Registered User Join Date: Dec 2016 Location: Noordwijkerhout, Netherlands Posts: 56	Re: looking for a wiper motor. I should first try to open the motor. A while ago I had the same issue with a wiper motor of a '61 corvette. You heard just a click and nothing happens. Because of the very old crease inside it some parts where sticking together. Just cleaned everything, new grease, and the motor was working again.

03-16-2017, 01:40 PM	#6
61K10 Registered User Join Date: Feb 2012 Location: pleasant valley--placerville ca Posts: 3,039	Re: looking for a wiper motor. DPowers--No. It like the 64-66. My 61 does not use the rubber washers that slip into the motor shell and has an o-ring type seal, not like the one on your 63. __________________ 1961 chevy K10 my build is------------61K10 build

03-23-2017, 03:08 PM	#7
ch3vynoob Registered User Join Date: Dec 2016 Location: Chattanooga tennessee Posts: 9	Re: looking for a wiper motor. I think I will try opening it and cleaning it out. I'll keep you guys updated. Mine does not look like the picture posted above. Mine is longer and lays flat against the firewall.

04-24-2017, 01:55 PM	#8
Northwest Outlaw Registered User Join Date: Jul 2015 Location: Seattle Posts: 228	Re: looking for a wiper motor. following along on this as my '61 wiper motor isn't working either. It has power to it from both the constant and the switch but nothing happens. Hoping to find a less that $200 fix for a simple thing like the wipers. __________________ 1961 Chevy Apache "BoomStick" -First build, lots of plans, little experience. What's the worst that could happen? http://67-72chevytrucks.com/vboard/s...d.php?t=694506

04-24-2017, 01:59 PM	#9
jbgroby Registered User Join Date: Nov 2008 Location: Lacombe, LA Posts: 2,772	Re: looking for a wiper motor. CH3 and Northwest Pls. Pm me, I just ordered a new 2 speed from Newport Friday. Does yours look like this? Attached Images __________________ http://s1299.photobucket.com/user/jb...23904108567829

03-16-2018, 09:46 AM	#11
jbgroby Registered User Join Date: Nov 2008 Location: Lacombe, LA Posts: 2,772	Re: looking for a wiper motor. Yes, I made the switch, Pictures attached. FYI I did a tutorial on the install if you search the listings. Attached Images __________________ http://s1299.photobucket.com/user/jb...23904108567829

03-16-2018, 11:06 AM	#13
jbgroby Registered User Join Date: Nov 2008 Location: Lacombe, LA Posts: 2,772	Re: looking for a wiper motor. Yep, I have a 60 GMC __________________ http://s1299.photobucket.com/user/jb...23904108567829

03-16-2018, 11:19 AM	#14
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: looking for a wiper motor. I was going to post a pic of my bracket but when I went to the shop the camera battery went bad. To make things worse I cant find the other camera, I can find the battery charger for both of them but the camera... I'm sure I didn't put it in the dryer. Here it is - If it were a snake it would have bit me: Attached Images __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats? Last edited by The Rocknrod; 03-16-2018 at 11:35 AM.

03-16-2018, 11:52 AM	#15
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,223	Re: looking for a wiper motor. The Newport motor can be ordered to fit any of the 60-66 mounting styles. I happened to order mine thru brothers when they were on sale. Best thing ever for these year trucks. Going from 1 speed to 2 good speeds was great. There is even the option to added intermittent to them later if you are tight for money now. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.