Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
04-10-2018, 05:21 PM | #1 |
Registered User
Join Date: Aug 2017
Location: Eugene Oregon
Posts: 128
|
windshield wipers stop halfway down and wont go
Hi all,
I just bought a 79 swb on saturday, and the wipers wont work. they go up, then on the down stroke they stop in the middle, and the motor makes a loud noise as it is trying to keep going but it is stuck. I can assist the wipers the rest of the way and they work if I assist but as soon as I let go they get stuck again. i lubed them as best I could but they still will not work. this morning the motor wouldnt turn off despite what i was doing at the switch. not sure if that is related but it happened. do you think this is a motor issue or a linkage issue? Or maybe something else I havent considered?
__________________
1977 SWB (c20 conversion) SBC350 Springfield Oregon Instagram: @nevernotchevy |
04-10-2018, 05:40 PM | #2 |
Registered User
Join Date: May 2007
Location: CO
Posts: 475
|
Re: windshield wipers stop halfway down and wont go
It's the park circuit in the motor. Replace the motor and you should be good to go.
|
04-10-2018, 05:43 PM | #3 |
Registered User
Join Date: Aug 2017
Location: Eugene Oregon
Posts: 128
|
Re: windshield wipers stop halfway down and wont go
Ok I was thinking that would result in the arms stopping in the wrong spot when I turn them off but you’re saying that will make them stall while the motor is still working? That’s good news cause I already bought a replacement motor.. I will report back
__________________
1977 SWB (c20 conversion) SBC350 Springfield Oregon Instagram: @nevernotchevy |
04-11-2018, 12:55 AM | #4 |
Registered User
Join Date: Aug 2017
Location: Eugene Oregon
Posts: 128
|
Re: windshield wipers stop halfway down and wont go
You were right! New motor is on and they are working perfectly. Thanks!
__________________
1977 SWB (c20 conversion) SBC350 Springfield Oregon Instagram: @nevernotchevy |
Bookmarks |
|
|