|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
04-25-2018, 08:59 PM
|
#1 |
|
Registered User
Join Date: Jul 2012
Location: STL MO
Posts: 85
|
LS Tach Signal to 2 Devices
Is it possible to use the same tach signal from the ECM to feed the pulse signal to 2 devices. I have it running to the Dakota Digital box for the gauges - but would also would like to run the optional tach pulse signal to my Innovate Boost Controller.
Any issues feeding both from the same source? |
|
|
|
04-26-2018, 12:27 AM
|
#2 |
|
Registered User
Join Date: Mar 2018
Location: Ardmore
Posts: 100
|
Re: LS Tach Signal to 2 Devices
Shouldn't be any issues running the signal in parallel to two devices, neither of them is going to pull any significant current.
|
|
|
|
|
04-26-2018, 10:15 AM
|
#3 |
|
Registered User
Join Date: Aug 2006
Location: Redmond, WA
Posts: 6,332
|
Re: LS Tach Signal to 2 Devices
Yes. I have the same Dakota digital box and I drive my fuel pump controller, tach, and so on all off the same tach signal wire.
__________________
1970 GMC Sierra Grande Custom Camper - Built, not Bought 1969 Pontiac 2+2 427/390 4-speed Coupe 1969 Pontiac 2+2 427/390 4-speed Convertible |
|
|
|
|
04-27-2018, 11:16 PM
|
#4 |
|
Registered User
Join Date: Jul 2012
Location: STL MO
Posts: 85
|
Re: LS Tach Signal to 2 Devices
Perfect. Appreciate the responses.
|
|
|
|
|
| Bookmarks |
|
|
Linear Mode
