The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1960 - 1966 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 06-12-2018, 05:40 PM   #1
Cris
Registered User
 
Join Date: Aug 2016
Location: Los Altos Hills, California
Posts: 170
Another T5 in a C10

I've been road testing my 63 C10 after installing a T5 five speed transmission. This has bee a nice upgrade to the Muncie three speed (on the tree) that was in it. I thought I'd post a few photos of my install to add to the archives of T5 installs.

First, a big thanks to Lugnutz. He has a blog (https://lugnutz65chevystepside.weebly.com/) that pretty much goes through every detail of installing a T5 in a C10. His info was incredibly helpful as I started down this road.

My truck is a 63 short fleet with a 230 inline 6. I chose the T5 because it is a small, modern transmission that would comfortably handle anything my 230 could give it. I also wanted the overdrive so I could cruise at 70 without the motor feeling like it was about to explode. I ended up with a rebuilt world class T5 with a gear set that went from a 2.95 first gear to a 0.64 overdrive. It has an aftermarket tail housing that puts the shifter in the S10 forward position.

For the shifter I took a stock S10 shifter, cut it open (lots of stuff on the web on how to do this), straightened the handle with a little blacksmithing, milled a flat and drilled and tapped holes for a hurst style stick, then reassembled. When I reassembled, I used screws to hold the upper plate on the shifter. This way I can easily disassemble if need be.

The T5 fit perfectly under my low hump tunnel. On my 63, the hump is removable and this made the install a little easier. Unlike other installs I've seen, I did not need to modify my e-brake crossmember or any of the e-brake linkages. I did drill out the rivets to the crossmember and made it a removable piece to ease in the installation and servicing.

I did not add a crossmember to hold the tail of the transmission. Instead I used the stock configuration with the bellhousing engine mounts and the transmission hanging of the bellhousing. The T5 is a small box and not much heavier than the Muncie three speed that was stock. I'm certainly not the first to go this route.

Here's a bunch of pics of the install:
Attached Images
     
Cris is offline   Reply With Quote
Old 06-12-2018, 08:23 PM   #2
AcampoDave
Registered User
 
AcampoDave's Avatar
 
Join Date: Feb 2013
Location: central California
Posts: 2,778
Re: Another T5 in a C10

That sweet. Now your good to go for a long drive.
AcampoDave is offline   Reply With Quote
Old 06-12-2018, 08:43 PM   #3
SidsChopShop
Registered User
 
Join Date: Apr 2014
Location: Harlan, IN
Posts: 67
Re: Another T5 in a C10

Good info thanks for sharing, this is the next upgrade on my list.
SidsChopShop is offline   Reply With Quote
Old 06-12-2018, 08:56 PM   #4
mehoff400
Registered User
 
Join Date: Apr 2015
Location: Puyallup WA
Posts: 365
Re: Another T5 in a C10

sweet.... T5 is the best upgrade i have done no question.
__________________
66 c10 patina 250 T-5

My truck
mehoff400 is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:17 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com