A MUST have "cutting oil" to have in your garage. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

MARTINSR · 08-23-2018, 12:50 AM

I may have posted this before, but it just blows me away every time I use it and have to scream from the roof tops GET SOME OF THIS!

This stuff is for tapping, but it works for drilling and even sawing metal with a hack saw! I cut a bunch of metal tonight, eighth inch angle iron and channel iron. Putting a drip of this oil on the cut then proceeding cutting with the hand hack saw and it goes from cutting metal to cutting a friggin piece of balsa wood! OMG what a difference! Drilling, the drill goes through the metal like it's a pencil through a piece of paper!

Honestly buy some of this stuff!

Brian

MiraclePieCo · 08-23-2018, 03:54 AM

Thanks for the tip. Any idea where we can buy it locally?

1project2many · 08-23-2018, 07:29 AM

That's an old can. And the product is effective. It's probably banned by the EPA.

sack54 · 08-23-2018, 07:45 AM

You can find on Amazon. Great for any cutting project .

72Mountaineer · 08-23-2018, 08:40 AM

I use 3 in 1 or air tool oil, any light oil works.

**mongocanfly** · 08-23-2018, 09:46 AM

the old tap magic with the tricolor in it is the best stuff....epa killed that the newer stuff works ok but not as good as the old

RADustin · 08-23-2018, 01:48 PM

every time I use tap magic with a drill bit and get hit in the face with the plumb of smoke I think I get a little cancer. It stinks bad and burns a little.

But it works amazing.

I buy it from amazon.

MARTINSR · 08-23-2018, 02:45 PM

Quote:

Originally Posted by RADustin

every time I use tap magic with a drill bit and get hit in the face with the plumb of smoke I think I get a little cancer. It stinks bad and burns a little.

But it works amazing.

I buy it from amazon.

This is true, having a fan going is a good idea.

Brian

MiraclePieCo · 08-23-2018, 04:04 PM

Quote:

Originally Posted by RADustin

every time I use tap magic with a drill bit and get hit in the face with the plumb of smoke I think I get a little cancer. It stinks bad and burns a little. But it works amazing.

I inhale it deeply; that way at least I have an excuse for all the stupid mistakes I make on my truck!

08-23-2018, 12:50 AM	#1
MARTINSR Registered User Join Date: Dec 2000 Location: Boise, Idaho Posts: 6,003	A MUST have "cutting oil" to have in your garage. I may have posted this before, but it just blows me away every time I use it and have to scream from the roof tops GET SOME OF THIS! This stuff is for tapping, but it works for drilling and even sawing metal with a hack saw! I cut a bunch of metal tonight, eighth inch angle iron and channel iron. Putting a drip of this oil on the cut then proceeding cutting with the hand hack saw and it goes from cutting metal to cutting a friggin piece of balsa wood! OMG what a difference! Drilling, the drill goes through the metal like it's a pencil through a piece of paper! Honestly buy some of this stuff! Brian Attached Images __________________ 1948 Chevy pickup Chopped, Sectioned, 1953 Corvette 235 powered. Once was even 401 Buick mid engined with the carburetor right between the seats! Bought with paper route money in 1973 when I was 15. "Fan of most anything that moves human beings"

08-23-2018, 03:54 AM	#2
MiraclePieCo Registered User Join Date: Sep 2014 Location: USA Posts: 2,249	Re: A MUST have "cutting oil" to have in your garage. Thanks for the tip. Any idea where we can buy it locally? __________________ 1951 Chevy Panel Truck

08-23-2018, 07:29 AM	#3
1project2many Registered User Join Date: Mar 2012 Location: Lakes Region NH Posts: 3,200	Re: A MUST have "cutting oil" to have in your garage. That's an old can. And the product is effective. It's probably banned by the EPA.

08-23-2018, 07:45 AM	#4
sack54 Registered User Join Date: Dec 2017 Location: Londonderry NH. Posts: 138	Re: A MUST have "cutting oil" to have in your garage. You can find on Amazon. Great for any cutting project .

08-23-2018, 08:40 AM	#5
72Mountaineer Registered User Join Date: Oct 2010 Location: Where Mountaineers are free Posts: 406	Re: A MUST have "cutting oil" to have in your garage. I use 3 in 1 or air tool oil, any light oil works.

08-23-2018, 09:46 AM	#6
mongocanfly Post Whore Join Date: May 2015 Location: Alabama Posts: 14,670	Re: A MUST have "cutting oil" to have in your garage. the old tap magic with the tricolor in it is the best stuff....epa killed that the newer stuff works ok but not as good as the old __________________ Mongo...aka Greg RIP Dad RIP Jesse 1981 C30 LQ9 NV4500..http://67-72chevytrucks.com/vboard/s...d.php?t=753598 Mongos AD- LS3 TR6060...http://67-72chevytrucks.com/vboard/s...34#post8522334 Columbus..the 1957 IH 4x4...http://67-72chevytrucks.com/vboard/s...63#post8082563 2023 Chevy Z71..daily driver

08-23-2018, 01:48 PM	#7
RADustin Registered User Join Date: Jun 2017 Location: New Orleans Posts: 386	Re: A MUST have "cutting oil" to have in your garage. every time I use tap magic with a drill bit and get hit in the face with the plumb of smoke I think I get a little cancer. It stinks bad and burns a little. But it works amazing. I buy it from amazon. __________________ 1949 Chevy 3100 P/U http://67-72chevytrucks.com/vboard/s...d.php?t=302780 1976 GMC Sierra Classic C35 CCSB http://67-72chevytrucks.com/vboard/s...25#post8188825



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.