1973 C20 Semi-build - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Wraith · 12-09-2018, 07:34 PM

Just chipping away.

Wraith · 12-10-2018, 08:14 PM

Liners installed and drove it outside to clean the garage.

LT7A · 12-11-2018, 09:25 AM

Quote:

Originally Posted by Wraith

I'd love to do them in fresh gold cadmium but will probably use the flat/satin black to hide oil/grease plus offset too much yellow.

Copy that.

Wraith · 12-18-2018, 03:15 PM

Well, hood is back on(I didn't paint the underside, starting to regret that), and it drove under it's own power and shifted through all three gears. Just need to diagnose the lack of turns/hazard lights and get it safety inspected, then I think it's off to Craigslist.

12-09-2018, 07:34 PM	#76
Wraith Registered User Join Date: May 2018 Location: Ft. Worth, Texas Posts: 60	Re: 1973 C20 Semi-build Just chipping away. __________________ https://mechanicdude.blogspot.com/

12-10-2018, 08:14 PM	#77
Wraith Registered User Join Date: May 2018 Location: Ft. Worth, Texas Posts: 60	Re: 1973 C20 Semi-build Liners installed and drove it outside to clean the garage. __________________ https://mechanicdude.blogspot.com/

12-18-2018, 03:15 PM	#79
Wraith Registered User Join Date: May 2018 Location: Ft. Worth, Texas Posts: 60	Re: 1973 C20 Semi-build Well, hood is back on(I didn't paint the underside, starting to regret that), and it drove under it's own power and shifted through all three gears. Just need to diagnose the lack of turns/hazard lights and get it safety inspected, then I think it's off to Craigslist. __________________ https://mechanicdude.blogspot.com/



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.