2018 Tahoe 2nd row, middle seat beats - help

[AJCK87]

Hey Guys,

Looking to integrate the middle seat belts, out of a 2018 Tahoe, into my 1965 Suburban 2nd and 3rd row seats. I have the belts, buckle assembly protector and bezel pieces, as seen in photo. My question is what does the bracket, if there is one, look like that? The piece that part 4, in the photo, would bolt to and that would hold the top section of the belt from pulling forward in a collision. Any pictures, schematics or info would help. Just tying to get an idea of the design or if there is a part out there that I can make work in my application. Thanks

[95 S_Trucker]

The center seatbelt is integrated into the seat.

#4 and #5 are plastic pieces. They snap into the seat back. As ling as the bases are securely mounted to your floor, you will be good.

[AJCK87]

Thanks for the response 95S!

I ordered two sets of parts 3, 4, 5 and 6 for each of back seats. I was just wondering how part 4 is fastened to the seat frame. There must be a bracket or something. I see there are a couple of screw holes on part 4. Just wondering what it’s fastened to, and if some one had a photo or something

[95 S_Trucker]

It looks like it’s inside the seat back.