47-55.1 1947 Guages - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Dachshund · 02-15-2019, 06:18 PM

I am switching over to 12v and, of course, the gauges are still 6v units. What is better/cheaper - replace the whole cluster, or get individual gauges? The chrome on mine is pitted, but I was planning on painting them anyway, so it's not a big deal. All I need are the Amp and the fuel guage, correct?

*Jesse Z* · 02-15-2019, 11:14 PM

Amp guage doesnt need to be changed, does it?, oil pressure and temp are mechanical,. So I think your looking at fuel gauge only. 12v replacement fuel gauges are chaep

Dont foreget to change light bulbs.

e015475 · 02-16-2019, 11:23 AM

The bezel and glass are easy to replace too. Parts are available from the usual suppliers.

MARTINSR · 02-16-2019, 11:58 AM

Quote:

Originally Posted by Jesse Z

Amp guage doesnt need to be changed, does it?, oil pressure and temp are mechanical,. So I think your looking at fuel gauge only. 12v replacement fuel gauges are chaep

Dont foreget to change light bulbs.

As I remember I didn't even change the fuel gauge. I don't think it works on "volts" so it doesn't matter.

Brian

Dachshund · 02-16-2019, 01:21 PM

Ok, thanks! Another Question -
What is the black sealant stuff used under the glass? It (WAS) it a gasket, or some sort of caulk?

**mr48chev** · 02-16-2019, 05:04 PM

I think that most of the truck trinket vendors have guage parts availble but this was easy for me to bring up.
https://www.classicparts.com/Gauge-Parts/products/851/

I'm thinking that "sealer" may originally have been the Bezel gasket.

Dachshund · 02-16-2019, 09:55 PM

Quote:

Originally Posted by mr48chev

I think that most of the truck trinket vendors have guage parts availble but this was easy for me to bring up.
https://www.classicparts.com/Gauge-Parts/products/851/

I'm thinking that "sealer" may originally have been the Bezel gasket.

Ok - Thanks! Now - are there TWO in each cluster (one on each side of the glass)?

MiraclePieCo · 02-17-2019, 04:14 AM

Quote:

Originally Posted by MARTINSR

As I remember I didn't even change the fuel gauge. I don't think it works on "volts" so it doesn't matter.

Brian

Classic Parts sells 6 and 12 volt gas gauges, so maybe there's a difference?

Yikes, they are NOT cheap:

https://www.classicparts.com/searchprods.asp

weim55 · 02-17-2019, 03:03 PM

If you are converting to 12 V on an otherwise stock truck you should be OK through the factory Ammeter. But if you have added a significant amount of electrical Accessories ( Electric fans, air conditioning, high-end stereo, etc) as well as a high output alternator the original wiring will not handle the The high amperage running through it.

Steve weim55 Colorado

Dachshund · 02-17-2019, 04:22 PM

Quote:

Originally Posted by weim55

If you are converting to 12 V on an otherwise stock truck you should be OK through the factory Ammeter. But if you have added a significant amount of electrical Accessories ( Electric fans, air conditioning, high-end stereo, etc) as well as a high output alternator the original wiring will not handle the The high amperage running through it.

Steve weim55 Colorado

Yeah, the wiring was the main reason the truck was parked - it was BAD 20 years ago. I plan on installing all new. Not very much in the way of "accessories", just radio, and MAYBE a fan - otherwise pretty simple.

02-15-2019, 06:18 PM	#1
Dachshund Registered User Join Date: Oct 2018 Location: Trenton MO Posts: 201	1947 Guages I am switching over to 12v and, of course, the gauges are still 6v units. What is better/cheaper - replace the whole cluster, or get individual gauges? The chrome on mine is pitted, but I was planning on painting them anyway, so it's not a big deal. All I need are the Amp and the fuel guage, correct? Last edited by Dachshund; 02-15-2019 at 06:27 PM.

02-15-2019, 11:14 PM	#2
Jesse Z Account Suspended Join Date: Aug 2016 Location: Florida, USA Posts: 290	Re: 1947 Guages Amp guage doesnt need to be changed, does it?, oil pressure and temp are mechanical,. So I think your looking at fuel gauge only. 12v replacement fuel gauges are chaep Dont foreget to change light bulbs.

02-16-2019, 11:23 AM	#3
e015475 Registered User Join Date: Nov 2013 Location: Show Low, Arizona Posts: 778	Re: 1947 Guages The bezel and glass are easy to replace too. Parts are available from the usual suppliers.

02-16-2019, 01:21 PM	#5
Dachshund Registered User Join Date: Oct 2018 Location: Trenton MO Posts: 201	Re: 1947 Guages Ok, thanks! Another Question - What is the black sealant stuff used under the glass? It (WAS) it a gasket, or some sort of caulk?

02-16-2019, 05:04 PM	#6
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,711	Re: 1947 Guages I think that most of the truck trinket vendors have guage parts availble but this was easy for me to bring up. https://www.classicparts.com/Gauge-Parts/products/851/ I'm thinking that "sealer" may originally have been the Bezel gasket. __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

02-17-2019, 03:03 PM	#9
weim55 Registered User Join Date: Jan 2017 Location: Larkspur, Colorado Posts: 916	Re: 1947 Guages If you are converting to 12 V on an otherwise stock truck you should be OK through the factory Ammeter. But if you have added a significant amount of electrical Accessories ( Electric fans, air conditioning, high-end stereo, etc) as well as a high output alternator the original wiring will not handle the The high amperage running through it. Steve weim55 Colorado



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.