47-55.1 1954 Chev 3100 Wheel Bearing Dust Caps - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Darthintel · 02-20-2019, 01:36 PM

Hello all,
Both my front wheel bearing dust caps fell off and I'm trying to locate replacements for my stock 1954 Chev 3100.

I found a set that looked like they would fit based upon measurements.
When I received the dust caps, they are about 1/8" too small.

Look at the attached picture. The packaging indicates 2.18" diameter, but the actual measurement is 2.08".

I'm still working to get a resolution to this problem with the vendor.

Still searching for wheel bearing dust caps.
Portland swap meet will be my next attempt to find dust caps.

I'm tempted to draw up my own and 3D print.

Darthintel · 04-10-2019, 11:22 AM

The wheel bearing dust cap saga continues.
I now have 4 sets of dust caps that indicate they are for a 1954 chev 3100 truck. All are too small.

All hardware I've bought so far has fit correctly - wheel bearings, brakes, wheel cylinder.

I have measured the ID of the hub and it's 2.13", which converts to 54.1mm.
What could be wrong? I don't think the hubs are off anything different, but now starting to have doubts. Yes- they are 6 lug hubs.

It would be great if some one with a 1954 chev 3100 could measure the ID of their hubs for comparison.
Thanks

MARTINSR · 04-10-2019, 06:32 PM

Funny that I would see this, I just an hour ago ordered some from my local parts store for my truck. It's got passenger car hubs though so I am not sure if they are the same. I will be trying them out tonight or tomorrow and will let you know if they work and what the measurement is. I have a pair of originals too, but they are in pretty funky condition.

Brian

**paulspickupparts** · 04-10-2019, 07:47 PM

Quote:

Originally Posted by Darthintel

The wheel bearing dust cap saga continues.
I now have 4 sets of dust caps that indicate they are for a 1954 chev 3100 truck. All are too small.

All hardware I've bought so far has fit correctly - wheel bearings, brakes, wheel cylinder.

I have measured the ID of the hub and it's 2.13", which converts to 54.1mm.
What could be wrong? I don't think the hubs are off anything different, but now starting to have doubts. Yes- they are 6 lug hubs.

It would be great if some one with a 1954 chev 3100 could measure the ID of their hubs for comparison.
Thanks

Took one off and sent pic and measurements.

MARTINSR · 04-10-2019, 10:27 PM

Quote:

Originally Posted by Darthintel

Hello all,
Both my front wheel bearing dust caps fell off and I'm trying to locate replacements for my stock 1954 Chev 3100.

I found a set that looked like they would fit based upon measurements.
When I received the dust caps, they are about 1/8" too small.

Look at the attached picture. The packaging indicates 2.18" diameter, but the actual measurement is 2.08".

I'm still working to get a resolution to this problem with the vendor.

Still searching for wheel bearing dust caps.
Portland swap meet will be my next attempt to find dust caps.

I'm tempted to draw up my own and 3D print.

Like I said, my hubs are from a 49-54 passenger car so they may not be the same. But I got the exact Mr. Gasket #2486 ones you got and they fit in my hubs.

Brian

nvrdone · 04-10-2019, 10:30 PM

strange you are having problems. I got my dust covers from NAPA. they are for a passenger car hub and fit great. I took the hub & drum with me and they measured them on the spot. had 2 in stock.

Darthintel · 04-11-2019, 10:57 AM

Quote:

Originally Posted by nvrdone

strange you are having problems. I got my dust covers from NAPA. they are for a passenger car hub and fit great. I took the hub & drum with me and they measured them on the spot. had 2 in stock.

I have been to Napa and looked at everything they had on the shelf. Nothing even close.

MARTINSR · 04-11-2019, 01:18 PM

Quote:

Originally Posted by Darthintel

I have been to Napa and looked at everything they had on the shelf. Nothing even close.

Then you have some odd ball hubs is the only thing it can be. Or someone modified those to use different bearings?

It has drums right?

Brian

Darthintel · 04-11-2019, 01:24 PM

Quote:

Originally Posted by MARTINSR

Then you have some odd ball hubs is the only thing it can be. Or someone modified those to use different bearings?

It has drums right?

Brian

Yes it has 6 lug hub / drum. I just installed new brake shoes, springs, wheel cylinder, and wheel bearings. All hardware bought for a 1954 chev 3100 and it fits.

What else could it be?

MARTINSR · 04-11-2019, 01:34 PM

Who knows, this is odd.

Brian

Darthintel · 04-11-2019, 04:08 PM

Quote:

Originally Posted by MARTINSR

Who knows, this is odd.

Brian

I'm going to a muffler shop and try to stretch the dust caps I have.

Fired up the 3D printer and will print a set today.
If they fit - I may use the ABS parts, or I could have them locally printed in metal.

MARTINSR · 04-11-2019, 04:40 PM

Quote:

Originally Posted by Darthintel

I'm going to a muffler shop and try to stretch the dust caps I have.

Fired up the 3D printer and will print a set today.
If they fit - I may use the ABS parts, or I could have them locally printed in metal.

Good thinking, but it won't be much!

Brian

Darthintel · 04-11-2019, 07:41 PM

First 3D print ....

MARTINSR · 04-11-2019, 08:30 PM

Quote:

Originally Posted by Darthintel

First 3D print ....

WTH!

Brian

Darthintel · 04-11-2019, 09:37 PM

Quote:

Originally Posted by MARTINSR

WTH!

Brian

Yes - I drew this up and printed on my 3D printer. Needs a little adjustment and printed again. Only took 1 hour to print.

I love to design / 3D print.

MARTINSR · 04-11-2019, 09:59 PM

The whole concept is so friggin wild it's crazy! What material is it made from?

Brian

Darthintel · 04-11-2019, 10:11 PM

ABS

ABS or Acrylonitrile butadiene styrene is a common thermoplastic polymer typically used for injection molding applications. This engineering plastic is popular due to its low production cost and the ease with which the material is machined by plastic manufacturers. Better yet, its natural benefits of affordability and machinability do not hinder the ABS material’s desired properties:

Impact Resistance
Structural Strength and Stiffness
Chemical Resistance
Excellent High and Low Temperature Performance
Great Electrical Insulation Properties
Easy to Paint and Glue

nvrdone · 04-11-2019, 11:13 PM

so make the damn things out of abs & start selling them !!

Darthintel · 04-14-2019, 07:00 PM

Took the under sized dust caps to a muffler shop and had them stretched.

Now to buy the new rims and hub caps to fit.

Looking at buying the Wheel Vintiques Series 12 smoothie and hub caps.
Wheel
https://www.wheelvintiques.com/acces...ap-47-198.html
SKU 12-660604
16x 6 , 6 lug 5.5" bolt circle, 4" backspace

Chevy Hub Caps
SKU 2030A

I'm curious if anyone has used these on a stock 1954 Chev 3100.

MiraclePieCo · 04-14-2019, 11:05 PM

Quote:

Originally Posted by Darthintel

Took the under sized dust caps to a muffler shop and had them stretched.

That's my kind of solution: simple, inexpensive and effective. Make it work, get 'er done.

02-20-2019, 01:36 PM	#1
Darthintel Registered User Join Date: Jun 2018 Location: Beaverton, Oregon Posts: 85	1954 Chev 3100 Wheel Bearing Dust Caps Hello all, Both my front wheel bearing dust caps fell off and I'm trying to locate replacements for my stock 1954 Chev 3100. I found a set that looked like they would fit based upon measurements. When I received the dust caps, they are about 1/8" too small. Look at the attached picture. The packaging indicates 2.18" diameter, but the actual measurement is 2.08". I'm still working to get a resolution to this problem with the vendor. Still searching for wheel bearing dust caps. Portland swap meet will be my next attempt to find dust caps. I'm tempted to draw up my own and 3D print. Attached Images Last edited by Darthintel; 02-20-2019 at 01:42 PM. Reason: added info

04-10-2019, 06:32 PM	#3
MARTINSR Registered User Join Date: Dec 2000 Location: Boise, Idaho Posts: 6,003	Re: 1954 Chev 3100 Wheel Bearing Dust Caps Funny that I would see this, I just an hour ago ordered some from my local parts store for my truck. It's got passenger car hubs though so I am not sure if they are the same. I will be trying them out tonight or tomorrow and will let you know if they work and what the measurement is. I have a pair of originals too, but they are in pretty funky condition. Brian __________________ 1948 Chevy pickup Chopped, Sectioned, 1953 Corvette 235 powered. Once was even 401 Buick mid engined with the carburetor right between the seats! Bought with paper route money in 1973 when I was 15. "Fan of most anything that moves human beings"

04-10-2019, 10:30 PM	#6
nvrdone Registered User Join Date: Dec 2011 Location: Moxee WA Posts: 1,482	Re: 1954 Chev 3100 Wheel Bearing Dust Caps strange you are having problems. I got my dust covers from NAPA. they are for a passenger car hub and fit great. I took the hub & drum with me and they measured them on the spot. had 2 in stock.

04-11-2019, 01:34 PM	#10
MARTINSR Registered User Join Date: Dec 2000 Location: Boise, Idaho Posts: 6,003	Re: 1954 Chev 3100 Wheel Bearing Dust Caps Who knows, this is odd. Brian __________________ 1948 Chevy pickup Chopped, Sectioned, 1953 Corvette 235 powered. Once was even 401 Buick mid engined with the carburetor right between the seats! Bought with paper route money in 1973 when I was 15. "Fan of most anything that moves human beings"

04-11-2019, 07:41 PM	#13
Darthintel Registered User Join Date: Jun 2018 Location: Beaverton, Oregon Posts: 85	Re: 1954 Chev 3100 Wheel Bearing Dust Caps First 3D print .... Attached Images

04-10-2019, 11:22 AM	#2
Darthintel Registered User Join Date: Jun 2018 Location: Beaverton, Oregon Posts: 85	Re: 1954 Chev 3100 Wheel Bearing Dust Caps The wheel bearing dust cap saga continues. I now have 4 sets of dust caps that indicate they are for a 1954 chev 3100 truck. All are too small. All hardware I've bought so far has fit correctly - wheel bearings, brakes, wheel cylinder. I have measured the ID of the hub and it's 2.13", which converts to 54.1mm. What could be wrong? I don't think the hubs are off anything different, but now starting to have doubts. Yes- they are 6 lug hubs. It would be great if some one with a 1954 chev 3100 could measure the ID of their hubs for comparison. Thanks

04-11-2019, 09:59 PM	#16
MARTINSR Registered User Join Date: Dec 2000 Location: Boise, Idaho Posts: 6,003	Re: 1954 Chev 3100 Wheel Bearing Dust Caps The whole concept is so friggin wild it's crazy! What material is it made from? Brian __________________ 1948 Chevy pickup Chopped, Sectioned, 1953 Corvette 235 powered. Once was even 401 Buick mid engined with the carburetor right between the seats! Bought with paper route money in 1973 when I was 15. "Fan of most anything that moves human beings"

04-11-2019, 10:11 PM	#17
Darthintel Registered User Join Date: Jun 2018 Location: Beaverton, Oregon Posts: 85	Re: 1954 Chev 3100 Wheel Bearing Dust Caps ABS ABS or Acrylonitrile butadiene styrene is a common thermoplastic polymer typically used for injection molding applications. This engineering plastic is popular due to its low production cost and the ease with which the material is machined by plastic manufacturers. Better yet, its natural benefits of affordability and machinability do not hinder the ABS material’s desired properties: Impact Resistance Structural Strength and Stiffness Chemical Resistance Excellent High and Low Temperature Performance Great Electrical Insulation Properties Easy to Paint and Glue

04-11-2019, 11:13 PM	#18
nvrdone Registered User Join Date: Dec 2011 Location: Moxee WA Posts: 1,482	Re: 1954 Chev 3100 Wheel Bearing Dust Caps so make the damn things out of abs & start selling them !!

04-14-2019, 07:00 PM	#19
Darthintel Registered User Join Date: Jun 2018 Location: Beaverton, Oregon Posts: 85	Re: 1954 Chev 3100 Wheel Bearing Dust Caps Took the under sized dust caps to a muffler shop and had them stretched. Now to buy the new rims and hub caps to fit. Looking at buying the Wheel Vintiques Series 12 smoothie and hub caps. Wheel https://www.wheelvintiques.com/acces...ap-47-198.html SKU 12-660604 16x 6 , 6 lug 5.5" bolt circle, 4" backspace Chevy Hub Caps SKU 2030A I'm curious if anyone has used these on a stock 1954 Chev 3100. Attached Images



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.